Iranian Journal of Wood and Paper Industries

Iranian Journal of Wood and Paper Industries

Keyword Index
A
  • Acid Hydrolysis Production and recovery of cellulosic biomass used in water filtration [Volume 16, Issue 4, 2025, Pages 471-482]
  • Acoustic properties Performance of sound absorption coefficient and sound transmission loss index in lightweight polymeric gypsum fiberboards with writing waste paper fibers [Volume 16, Issue 4, 2025, Pages 499-513]
  • Activated sludge Effect of Using Treated Activated Sludge by Acetic Acid on Strength Properties of Old Newspaper Recycled Pulp [Volume 16, Issue 3, 2025, Pages 323-331]
  • Alkaline Treatment Fabrication of Bio-Based Banana Fiber-Cement Composite and Evaluating its Technical Characteristics [Volume 16, Issue 3, 2025, Pages 437-455]
  • Alpha cellulose Production and recovery of cellulosic biomass used in water filtration [Volume 16, Issue 4, 2025, Pages 471-482]
  • Antibacterial Studying the antibacterial properties of papers treated with extracts of leaves, bark and wood of two species of oak and eucalyptus [Volume 16, Issue 2, 2025, Pages 219-233]
  • Antibacterial activity Preparation and Characterization of Antibacterial packaging board via coating with carboxymethyl cellulose and ciprofloxacin [Volume 16, Issue 4, 2025, Pages 483-497]
  • Ash Wood Flour Studying the effect of nanoclay on the mechanical, thermal and fire properties of composites made from ash wood flour and waste polypropylene [Volume 16, Issue 2, 2025, Pages 139-150]
  • Atomic absorption spectroscopy Evaluation of the efficiency of biodegradable cellulose hydrogels in removing metal ions [Volume 16, Issue 4, 2025, Pages 605-617]
  • Avicennia marina Comparative Study of Cross-Sectional Wood Anatomy in Avicennia marina and Rhizophora mucronata [Volume 16, Issue 4, 2025, Pages 515-531]
B
  • Bacillus subtilis The role of Bacillus subtilis in the biological treatment of soda and kraft pulping wastewater [Volume 16, Issue 3, 2025, Pages 367-379]
  • Bacillus subtilis Comparison of the Biodegradation Efficiency of the Phaenerochaete chrysosporium and the Bacillus subtilis in Kraft Black Liquor [Volume 16, Issue 4, 2025, Pages 563-576]
  • Bagasse Influence of Xylanase on the Viscosity and Mechanical Properties of Bagasse Pulp in ECF Bleaching Sequences [Volume 16, Issue 1, 2025, Pages 15-28]
  • Bagasse pulp Addition and retention of cellulose nanofibers to wet paper web without the use of retention aids and reduction of water drainage rate [Volume 16, Issue 1, 2025, Pages 29-42]
  • Banana fiber-cement composite Fabrication of Bio-Based Banana Fiber-Cement Composite and Evaluating its Technical Characteristics [Volume 16, Issue 3, 2025, Pages 437-455]
  • Basolite 1200 Optimization of Biofuel Derived from Fast Pyrolysis of Kraft Lignin Using Heterogeneous Catalysts [Volume 16, Issue 3, 2025, Pages 333-349]
  • Binder-less panel Manufacturing and Characterization of Binder-less Particleboard from Date Palm Residues [Volume 16, Issue 3, 2025, Pages 287-302]
  • Biofuel Optimization of Biofuel Derived from Fast Pyrolysis of Kraft Lignin Using Heterogeneous Catalysts [Volume 16, Issue 3, 2025, Pages 333-349]
  • Biological treatment The role of Bacillus subtilis in the biological treatment of soda and kraft pulping wastewater [Volume 16, Issue 3, 2025, Pages 367-379]
  • Biological treatment Comparison of the Biodegradation Efficiency of the Phaenerochaete chrysosporium and the Bacillus subtilis in Kraft Black Liquor [Volume 16, Issue 4, 2025, Pages 563-576]
  • Biomass Production of Cellulose and Nanocellulose from Macroalgae as Novel Green Sustainable Bioresources [Volume 16, Issue 3, 2025, Pages 381-397]
  • Bleaching Influence of Xylanase on the Viscosity and Mechanical Properties of Bagasse Pulp in ECF Bleaching Sequences [Volume 16, Issue 1, 2025, Pages 15-28]
  • BOD Comparison of the Biodegradation Efficiency of the Phaenerochaete chrysosporium and the Bacillus subtilis in Kraft Black Liquor [Volume 16, Issue 4, 2025, Pages 563-576]
  • Box Behnken and Polyacrylamide Optimization of optical and mechanical properties of commercial CMP pulp using response surface methodology (RSM) [Volume 16, Issue 2, 2025, Pages 235-248]
C
  • Cellulose Production of Cellulose and Nanocellulose from Macroalgae as Novel Green Sustainable Bioresources [Volume 16, Issue 3, 2025, Pages 381-397]
  • Cellulose Production and recovery of cellulosic biomass used in water filtration [Volume 16, Issue 4, 2025, Pages 471-482]
  • Cellulose Filter Production and recovery of cellulosic biomass used in water filtration [Volume 16, Issue 4, 2025, Pages 471-482]
  • Cellulose nanocrystals Investigation of the contact angle of wood impregnated with cellulose nanocrystals and its functionalized compounds [Volume 16, Issue 2, 2025, Pages 261-281]
  • Cellulose nanofiber Evaluation of nano-sized fraction index as a benchmark parameter for cellulose nanofiber production [Volume 16, Issue 4, 2025, Pages 577-589]
  • Cellulose nanofibers (CNF) Addition and retention of cellulose nanofibers to wet paper web without the use of retention aids and reduction of water drainage rate [Volume 16, Issue 1, 2025, Pages 29-42]
  • Cellulose nanofibers (CNF) Investigation of the Effect of Energy Consumption on the Physical and Mechanical Properties of Cellulose Nanofibers Derived from Wheat Straw [Volume 16, Issue 3, 2025, Pages 399-413]
  • Chemical oxygen demand Investigating the effect of coagulation and ozonation on enhancing the efficacy of membrane filtration for papermaking effluent treatment [Volume 16, Issue 1, 2025, Pages 109-123]
  • Ciprofloxacin Preparation and Characterization of Antibacterial packaging board via coating with carboxymethyl cellulose and ciprofloxacin [Volume 16, Issue 4, 2025, Pages 483-497]
  • Coagulation Investigating the effect of coagulation and ozonation on enhancing the efficacy of membrane filtration for papermaking effluent treatment [Volume 16, Issue 1, 2025, Pages 109-123]
  • Coating Addition and retention of cellulose nanofibers to wet paper web without the use of retention aids and reduction of water drainage rate [Volume 16, Issue 1, 2025, Pages 29-42]
  • Coating Comparison on the Effect of Diammonium Phosphate and Sodium Silicate as Coating Materials on Fire and Strength Properties of Paper Made from Bagasse Soda Pulp [Volume 16, Issue 2, 2025, Pages 189-208]
  • Coating The Effect of Nanographene, Fluorine, and Zein as Coating Pigments on the Physical and Mechanical Properties of Printing Paper [Volume 16, Issue 4, 2025, Pages 547-562]
  • COD Comparison of the Biodegradation Efficiency of the Phaenerochaete chrysosporium and the Bacillus subtilis in Kraft Black Liquor [Volume 16, Issue 4, 2025, Pages 563-576]
  • Competitive strategy, furniture industry analysis, Porter&rsquo Analysis of the Competitive Structure of the Upholstered Furniture Industry in Tehran Province Using Porter’s Five Forces Model [Volume 16, Issue 4, 2025, Pages 533-546]
  • Concentration ratio indicators Analysis and study of the concentration of the import market for Blockboard, Laminboard, and Battenboard in Iran [Volume 16, Issue 2, 2025, Pages 151-164]
  • Contact angle Investigation of the contact angle of wood impregnated with cellulose nanocrystals and its functionalized compounds [Volume 16, Issue 2, 2025, Pages 261-281]
  • Cotton FTIR-ATR spectroscopy: The method for identifying and separating the fibers of non-woody plants such as flax, hemp, kenaf and cotton [Volume 16, Issue 1, 2025, Pages 43-61]
D
  • Density Study of the effect of extractives, ash content, and density on the thermal conductivity in five wood species (Abies, Alnus glutinosa, Albizia julibrissin, Juglans regia, Platanus orientalis) [Volume 16, Issue 2, 2025, Pages 249-260]
  • Document analysis Analysis of Governance Modes and Resilience Assessment of Nature-Based Enterprises within the Framework of Sustainable Forest Management [Volume 16, Issue 4, 2025, Pages 619-641]
  • Drainage Feasibility of using tragacanth gum and Poly Aluminum Chloride (PAC) for improving the paper recycling process [Volume 16, Issue 2, 2025, Pages 209-218]
E
  • Eco-friendly biocomposite Effect of Using Treated Activated Sludge by Acetic Acid on Strength Properties of Old Newspaper Recycled Pulp [Volume 16, Issue 3, 2025, Pages 323-331]
  • Enzymatic hydrolysis Production of Cellulose and Nanocellulose from Macroalgae as Novel Green Sustainable Bioresources [Volume 16, Issue 3, 2025, Pages 381-397]
  • Eucalyptus Studying the antibacterial properties of papers treated with extracts of leaves, bark and wood of two species of oak and eucalyptus [Volume 16, Issue 2, 2025, Pages 219-233]
F
  • Fast Pyrolysis Optimization of Biofuel Derived from Fast Pyrolysis of Kraft Lignin Using Heterogeneous Catalysts [Volume 16, Issue 3, 2025, Pages 333-349]
  • Faustman Model Determining the optimal cycle of poplar cultivation under uncertainty conditions and considering the opportunity cost of agricultural land [Volume 16, Issue 2, 2025, Pages 165-187]
  • FESEM images Fabrication of Bio-Based Banana Fiber-Cement Composite and Evaluating its Technical Characteristics [Volume 16, Issue 3, 2025, Pages 437-455]
  • Fire properties Comparison on the Effect of Diammonium Phosphate and Sodium Silicate as Coating Materials on Fire and Strength Properties of Paper Made from Bagasse Soda Pulp [Volume 16, Issue 2, 2025, Pages 189-208]
  • Fire resistance Fabrication of Bio-Based Banana Fiber-Cement Composite and Evaluating its Technical Characteristics [Volume 16, Issue 3, 2025, Pages 437-455]
  • Flame-retardancy Comparison on the Effect of Diammonium Phosphate and Sodium Silicate as Coating Materials on Fire and Strength Properties of Paper Made from Bagasse Soda Pulp [Volume 16, Issue 2, 2025, Pages 189-208]
  • Flax FTIR-ATR spectroscopy: The method for identifying and separating the fibers of non-woody plants such as flax, hemp, kenaf and cotton [Volume 16, Issue 1, 2025, Pages 43-61]
  • Flexural Strength Improving the bending strength of fiberboard-polystyrene foam sandwich composite panels through designing grooves on the bottom surface of the outer layer [Volume 16, Issue 4, 2025, Pages 457-470]
  • Fourier-transform infrared spectroscopy (FTIR) Investigation of physical and mechanical properties of wood plastic composite after steaming and adding recycled polymer [Volume 16, Issue 4, 2025, Pages 591-604]
  • FTIR-ATR FTIR-ATR spectroscopy: The method for identifying and separating the fibers of non-woody plants such as flax, hemp, kenaf and cotton [Volume 16, Issue 1, 2025, Pages 43-61]
  • FTIR spectroscopy Fabrication of Bio-Based Banana Fiber-Cement Composite and Evaluating its Technical Characteristics [Volume 16, Issue 3, 2025, Pages 437-455]
G
  • Glycerol Investigating the effect of glycerol and polyvinyl alcohol in the production of antibacterial films from nanocrystals cellulose [Volume 16, Issue 1, 2025, Pages 89-107]
  • GO Photocatalytic Degradation of Methylene Blue Dye by Cellulose Nanofibers/Nano ZnO/GO Nanobiocomposite [Volume 16, Issue 1, 2025, Pages 125-138]
  • Graphene The Effect of Nanographene, Fluorine, and Zein as Coating Pigments on the Physical and Mechanical Properties of Printing Paper [Volume 16, Issue 4, 2025, Pages 547-562]
  • Gypsum board reinforced with fibers Performance of sound absorption coefficient and sound transmission loss index in lightweight polymeric gypsum fiberboards with writing waste paper fibers [Volume 16, Issue 4, 2025, Pages 499-513]
H
  • Hemp FTIR-ATR spectroscopy: The method for identifying and separating the fibers of non-woody plants such as flax, hemp, kenaf and cotton [Volume 16, Issue 1, 2025, Pages 43-61]
  • Heterogeneous catalysts Optimization of Biofuel Derived from Fast Pyrolysis of Kraft Lignin Using Heterogeneous Catalysts [Volume 16, Issue 3, 2025, Pages 333-349]
  • Hydrogen bonding Synthesis of Glycerin-Calcium Carbonate Complex and Its Effect on Paper Tensile Strength [Volume 16, Issue 1, 2025, Pages 73-87]
I
  • Impregnation The Effect of Decorative Base Paper Grammage on Melamine Paper Properties [Volume 16, Issue 3, 2025, Pages 351-366]
  • Interest Rate Determining the optimal cycle of poplar cultivation under uncertainty conditions and considering the opportunity cost of agricultural land [Volume 16, Issue 2, 2025, Pages 165-187]
  • Ionic liquid Design and Synthesis of New Ionic Liquids as Pretreatment Agent of Wood Flour, and Studying Its Effects on the Physical, Mechanical and Viscoelastic Properties of Polyethylene-based Composites [Volume 16, Issue 3, 2025, Pages 415-435]
K
  • Kenaf FTIR-ATR spectroscopy: The method for identifying and separating the fibers of non-woody plants such as flax, hemp, kenaf and cotton [Volume 16, Issue 1, 2025, Pages 43-61]
  • Keywords: acetic acid Effect of Using Treated Activated Sludge by Acetic Acid on Strength Properties of Old Newspaper Recycled Pulp [Volume 16, Issue 3, 2025, Pages 323-331]
  • Keywords: Nano chitosan Optimization of optical and mechanical properties of commercial CMP pulp using response surface methodology (RSM) [Volume 16, Issue 2, 2025, Pages 235-248]
  • Keywords: Synthetic calcium carbonate Synthesis of Glycerin-Calcium Carbonate Complex and Its Effect on Paper Tensile Strength [Volume 16, Issue 1, 2025, Pages 73-87]
  • Kraft The role of Bacillus subtilis in the biological treatment of soda and kraft pulping wastewater [Volume 16, Issue 3, 2025, Pages 367-379]
  • Kraft black liquor Comparison of the Biodegradation Efficiency of the Phaenerochaete chrysosporium and the Bacillus subtilis in Kraft Black Liquor [Volume 16, Issue 4, 2025, Pages 563-576]
  • Kraft lignin Optimization of Biofuel Derived from Fast Pyrolysis of Kraft Lignin Using Heterogeneous Catalysts [Volume 16, Issue 3, 2025, Pages 333-349]
L
  • Land Rrent Determining the optimal cycle of poplar cultivation under uncertainty conditions and considering the opportunity cost of agricultural land [Volume 16, Issue 2, 2025, Pages 165-187]
  • Leaf extract Studying the antibacterial properties of papers treated with extracts of leaves, bark and wood of two species of oak and eucalyptus [Volume 16, Issue 2, 2025, Pages 219-233]
  • Limiting Oxygen Index Studying the effect of nanoclay on the mechanical, thermal and fire properties of composites made from ash wood flour and waste polypropylene [Volume 16, Issue 2, 2025, Pages 139-150]
M
  • Macroalgae Production of Cellulose and Nanocellulose from Macroalgae as Novel Green Sustainable Bioresources [Volume 16, Issue 3, 2025, Pages 381-397]
  • Mechanical properties Manufacturing and Characterization of Binder-less Particleboard from Date Palm Residues [Volume 16, Issue 3, 2025, Pages 287-302]
  • Mechanical properties Preparation and Characterization of Antibacterial packaging board via coating with carboxymethyl cellulose and ciprofloxacin [Volume 16, Issue 4, 2025, Pages 483-497]
  • Mechanical properties The Effect of Nanographene, Fluorine, and Zein as Coating Pigments on the Physical and Mechanical Properties of Printing Paper [Volume 16, Issue 4, 2025, Pages 547-562]
  • Mechanical Strength Design and Synthesis of New Ionic Liquids as Pretreatment Agent of Wood Flour, and Studying Its Effects on the Physical, Mechanical and Viscoelastic Properties of Polyethylene-based Composites [Volume 16, Issue 3, 2025, Pages 415-435]
  • Methylene blue Photocatalytic Degradation of Methylene Blue Dye by Cellulose Nanofibers/Nano ZnO/GO Nanobiocomposite [Volume 16, Issue 1, 2025, Pages 125-138]
  • Microfluidizer Investigation of the Effect of Energy Consumption on the Physical and Mechanical Properties of Cellulose Nanofibers Derived from Wheat Straw [Volume 16, Issue 3, 2025, Pages 399-413]
  • Modulus of Elasticity Improving the bending strength of fiberboard-polystyrene foam sandwich composite panels through designing grooves on the bottom surface of the outer layer [Volume 16, Issue 4, 2025, Pages 457-470]
  • Modulus of rupture Evaluation of composite made of rice husk and gypsum using bacterial nanocellulose fiber (BNCF) [Volume 16, Issue 3, 2025, Pages 303-322]
  • Morphology Design and Synthesis of New Ionic Liquids as Pretreatment Agent of Wood Flour, and Studying Its Effects on the Physical, Mechanical and Viscoelastic Properties of Polyethylene-based Composites [Volume 16, Issue 3, 2025, Pages 415-435]
N
  • Nanobiocomposites Photocatalytic Degradation of Methylene Blue Dye by Cellulose Nanofibers/Nano ZnO/GO Nanobiocomposite [Volume 16, Issue 1, 2025, Pages 125-138]
  • Nano cellulose Photocatalytic Degradation of Methylene Blue Dye by Cellulose Nanofibers/Nano ZnO/GO Nanobiocomposite [Volume 16, Issue 1, 2025, Pages 125-138]
  • Nano cellulose Evaluation of composite made of rice husk and gypsum using bacterial nanocellulose fiber (BNCF) [Volume 16, Issue 3, 2025, Pages 303-322]
  • Nanocellulose Production of Cellulose and Nanocellulose from Macroalgae as Novel Green Sustainable Bioresources [Volume 16, Issue 3, 2025, Pages 381-397]
  • Nano clay Studying the effect of nanoclay on the mechanical, thermal and fire properties of composites made from ash wood flour and waste polypropylene [Volume 16, Issue 2, 2025, Pages 139-150]
  • Nanocrystallinecellulose Investigating the effect of glycerol and polyvinyl alcohol in the production of antibacterial films from nanocrystals cellulose [Volume 16, Issue 1, 2025, Pages 89-107]
  • Nano ZnO Photocatalytic Degradation of Methylene Blue Dye by Cellulose Nanofibers/Nano ZnO/GO Nanobiocomposite [Volume 16, Issue 1, 2025, Pages 125-138]
  • Natural Polymer Feasibility of using tragacanth gum and Poly Aluminum Chloride (PAC) for improving the paper recycling process [Volume 16, Issue 2, 2025, Pages 209-218]
  • Nature-based enterprises Analysis of Governance Modes and Resilience Assessment of Nature-Based Enterprises within the Framework of Sustainable Forest Management [Volume 16, Issue 4, 2025, Pages 619-641]
  • Non-Woody plants fiber FTIR-ATR spectroscopy: The method for identifying and separating the fibers of non-woody plants such as flax, hemp, kenaf and cotton [Volume 16, Issue 1, 2025, Pages 43-61]
O
  • Optical Brightener Optimization of optical and mechanical properties of commercial CMP pulp using response surface methodology (RSM) [Volume 16, Issue 2, 2025, Pages 235-248]
  • Optimal Rotation Age Determining the optimal cycle of poplar cultivation under uncertainty conditions and considering the opportunity cost of agricultural land [Volume 16, Issue 2, 2025, Pages 165-187]
  • Ozonation Investigating the effect of coagulation and ozonation on enhancing the efficacy of membrane filtration for papermaking effluent treatment [Volume 16, Issue 1, 2025, Pages 109-123]
P
  • Packaging paper Production of Chemical pulp Using Carbonate Process from Wheat Straw [Volume 16, Issue 1, 2025, Pages 1-14]
  • Packaging paper Studying the antibacterial properties of papers treated with extracts of leaves, bark and wood of two species of oak and eucalyptus [Volume 16, Issue 2, 2025, Pages 219-233]
  • Papermaking effluent Investigating the effect of coagulation and ozonation on enhancing the efficacy of membrane filtration for papermaking effluent treatment [Volume 16, Issue 1, 2025, Pages 109-123]
  • Paper tensile strength Addition and retention of cellulose nanofibers to wet paper web without the use of retention aids and reduction of water drainage rate [Volume 16, Issue 1, 2025, Pages 29-42]
  • Phaenerochaete chrysosporium Comparison of the Biodegradation Efficiency of the Phaenerochaete chrysosporium and the Bacillus subtilis in Kraft Black Liquor [Volume 16, Issue 4, 2025, Pages 563-576]
  • Photocatalytic degradation Photocatalytic Degradation of Methylene Blue Dye by Cellulose Nanofibers/Nano ZnO/GO Nanobiocomposite [Volume 16, Issue 1, 2025, Pages 125-138]
  • Physico-mechanical properties Fabrication of Bio-Based Banana Fiber-Cement Composite and Evaluating its Technical Characteristics [Volume 16, Issue 3, 2025, Pages 437-455]
  • Poly aluminum chloride Feasibility of using tragacanth gum and Poly Aluminum Chloride (PAC) for improving the paper recycling process [Volume 16, Issue 2, 2025, Pages 209-218]
  • Polymeric gypsum panel Performance of sound absorption coefficient and sound transmission loss index in lightweight polymeric gypsum fiberboards with writing waste paper fibers [Volume 16, Issue 4, 2025, Pages 499-513]
  • Polyvinylalcohol Investigating the effect of glycerol and polyvinyl alcohol in the production of antibacterial films from nanocrystals cellulose [Volume 16, Issue 1, 2025, Pages 89-107]
  • Poplar wood Investigation of the contact angle of wood impregnated with cellulose nanocrystals and its functionalized compounds [Volume 16, Issue 2, 2025, Pages 261-281]
  • Pretreatment Design and Synthesis of New Ionic Liquids as Pretreatment Agent of Wood Flour, and Studying Its Effects on the Physical, Mechanical and Viscoelastic Properties of Polyethylene-based Composites [Volume 16, Issue 3, 2025, Pages 415-435]
  • Protein zein The Effect of Nanographene, Fluorine, and Zein as Coating Pigments on the Physical and Mechanical Properties of Printing Paper [Volume 16, Issue 4, 2025, Pages 547-562]
  • Pulping Black Liquor The role of Bacillus subtilis in the biological treatment of soda and kraft pulping wastewater [Volume 16, Issue 3, 2025, Pages 367-379]
  • Pulp viscosity Influence of Xylanase on the Viscosity and Mechanical Properties of Bagasse Pulp in ECF Bleaching Sequences [Volume 16, Issue 1, 2025, Pages 15-28]
R
  • Recovery of Spent Filter Production and recovery of cellulosic biomass used in water filtration [Volume 16, Issue 4, 2025, Pages 471-482]
  • Recycled polypropylene Investigation of physical and mechanical properties of wood plastic composite after steaming and adding recycled polymer [Volume 16, Issue 4, 2025, Pages 591-604]
  • Refiner Investigation of the Effect of Energy Consumption on the Physical and Mechanical Properties of Cellulose Nanofibers Derived from Wheat Straw [Volume 16, Issue 3, 2025, Pages 399-413]
  • Rent Determining the optimal cycle of poplar cultivation under uncertainty conditions and considering the opportunity cost of agricultural land [Volume 16, Issue 2, 2025, Pages 165-187]
  • Response surface Optimization of optical and mechanical properties of commercial CMP pulp using response surface methodology (RSM) [Volume 16, Issue 2, 2025, Pages 235-248]
  • Retention Addition and retention of cellulose nanofibers to wet paper web without the use of retention aids and reduction of water drainage rate [Volume 16, Issue 1, 2025, Pages 29-42]
  • Retention aid Feasibility of using tragacanth gum and Poly Aluminum Chloride (PAC) for improving the paper recycling process [Volume 16, Issue 2, 2025, Pages 209-218]
  • Rhizophora mucronata Comparative Study of Cross-Sectional Wood Anatomy in Avicennia marina and Rhizophora mucronata [Volume 16, Issue 4, 2025, Pages 515-531]
  • Rice husk Evaluation of composite made of rice husk and gypsum using bacterial nanocellulose fiber (BNCF) [Volume 16, Issue 3, 2025, Pages 303-322]
S
  • Scanning Electron Microscopy (SEM) Investigation of physical and mechanical properties of wood plastic composite after steaming and adding recycled polymer [Volume 16, Issue 4, 2025, Pages 591-604]
  • Sepiolite Optimization of Biofuel Derived from Fast Pyrolysis of Kraft Lignin Using Heterogeneous Catalysts [Volume 16, Issue 3, 2025, Pages 333-349]
  • Soda pulping Influence of Xylanase on the Viscosity and Mechanical Properties of Bagasse Pulp in ECF Bleaching Sequences [Volume 16, Issue 1, 2025, Pages 15-28]
  • Steam treatment of fibers Investigation of physical and mechanical properties of wood plastic composite after steaming and adding recycled polymer [Volume 16, Issue 4, 2025, Pages 591-604]
  • Strength Properties Effect of Using Treated Activated Sludge by Acetic Acid on Strength Properties of Old Newspaper Recycled Pulp [Volume 16, Issue 3, 2025, Pages 323-331]
T
  • Tensile modulus Studying the effect of nanoclay on the mechanical, thermal and fire properties of composites made from ash wood flour and waste polypropylene [Volume 16, Issue 2, 2025, Pages 139-150]
  • Tensile strength Studying the effect of nanoclay on the mechanical, thermal and fire properties of composites made from ash wood flour and waste polypropylene [Volume 16, Issue 2, 2025, Pages 139-150]
  • Thermal conductivity Study of the effect of extractives, ash content, and density on the thermal conductivity in five wood species (Abies, Alnus glutinosa, Albizia julibrissin, Juglans regia, Platanus orientalis) [Volume 16, Issue 2, 2025, Pages 249-260]
  • Thermal treatment The effect of thermal treatment of Paulownia wood species on the physical and mechanical properties of the resulting layered products [Volume 16, Issue 1, 2025, Pages 63-72]
  • Timber and non-timber forest products (NTFPs) Analysis of Governance Modes and Resilience Assessment of Nature-Based Enterprises within the Framework of Sustainable Forest Management [Volume 16, Issue 4, 2025, Pages 619-641]
  • Tragacanth gum hemicellulose Feasibility of using tragacanth gum and Poly Aluminum Chloride (PAC) for improving the paper recycling process [Volume 16, Issue 2, 2025, Pages 209-218]
  • Treatment Investigating the effect of coagulation and ozonation on enhancing the efficacy of membrane filtration for papermaking effluent treatment [Volume 16, Issue 1, 2025, Pages 109-123]
W
  • Wastewater treatment The role of Bacillus subtilis in the biological treatment of soda and kraft pulping wastewater [Volume 16, Issue 3, 2025, Pages 367-379]
  • Wet end chemistry Feasibility of using tragacanth gum and Poly Aluminum Chloride (PAC) for improving the paper recycling process [Volume 16, Issue 2, 2025, Pages 209-218]
  • Wet paper web Addition and retention of cellulose nanofibers to wet paper web without the use of retention aids and reduction of water drainage rate [Volume 16, Issue 1, 2025, Pages 29-42]
  • Wheat straw Production of Chemical pulp Using Carbonate Process from Wheat Straw [Volume 16, Issue 1, 2025, Pages 1-14]
  • Wheat straw Investigation of the Effect of Energy Consumption on the Physical and Mechanical Properties of Cellulose Nanofibers Derived from Wheat Straw [Volume 16, Issue 3, 2025, Pages 399-413]
X
  • X-ray diffraction (XRD) Investigation of physical and mechanical properties of wood plastic composite after steaming and adding recycled polymer [Volume 16, Issue 4, 2025, Pages 591-604]
  • Xylanase Influence of Xylanase on the Viscosity and Mechanical Properties of Bagasse Pulp in ECF Bleaching Sequences [Volume 16, Issue 1, 2025, Pages 15-28]
Z
  • Zagros forests Analysis of Governance Modes and Resilience Assessment of Nature-Based Enterprises within the Framework of Sustainable Forest Management [Volume 16, Issue 4, 2025, Pages 619-641]