Abdolkhani, Ali Optimization of Biofuel Derived from Fast Pyrolysis of Kraft Lignin Using Heterogeneous Catalysts [Volume 16, Issue 3, 2025, Pages 333-349]
Afra, Elyas Investigating the effect of glycerol and polyvinyl alcohol in the production of antibacterial films from nanocrystals cellulose [Volume 16, Issue 1, 2025, Pages 89-107]
Afroshteh, Mohammad Reza Improving the bending strength of fiberboard-polystyrene foam sandwich composite panels through designing grooves on the bottom surface of the outer layer [Volume 16, Issue 4, 2026, Pages 457-470]
Afsharpour, Maryam FTIR-ATR spectroscopy: The method for identifying and separating the fibers of non-woody plants such as flax, hemp, kenaf and cotton [Volume 16, Issue 1, 2025, Pages 43-61]
Aghdami, Ali Investigating the effect of coagulation and ozonation on enhancing the efficacy of membrane filtration for papermaking effluent treatment [Volume 16, Issue 1, 2025, Pages 109-123]
Ahmadi, Mohammad Investigation of the Effect of Energy Consumption on the Physical and Mechanical Properties of Cellulose Nanofibers Derived from Wheat Straw [Volume 16, Issue 3, 2025, Pages 399-413]
Ahmadi, Peyman Fabrication of Bio-Based Banana Fiber-Cement Composite and Evaluating its Technical Characteristics [Volume 16, Issue 3, 2025, Pages 437-455]
Amani Bishehgah, Naghmeh Effect of Using Treated Activated Sludge by Acetic Acid on Strength Properties of Old Newspaper Recycled Pulp [Volume 16, Issue 3, 2025, Pages 323-331]
Arabi, Mohammad Improving the bending strength of fiberboard-polystyrene foam sandwich composite panels through designing grooves on the bottom surface of the outer layer [Volume 16, Issue 4, 2026, Pages 457-470]
Aryaie Monfared, Mohammad Hadi Production of Cellulose and Nanocellulose from Macroalgae as Novel Green Sustainable Bioresources [Volume 16, Issue 3, 2025, Pages 381-397]
Asadpour, Ghasem Photocatalytic Degradation of Methylene Blue Dye by Cellulose Nanofibers/Nano ZnO/GO Nanobiocomposite [Volume 16, Issue 1, 2025, Pages 125-138]
Asadpur, Ghasem Comparison on the Effect of Diammonium Phosphate and Sodium Silicate as Coating Materials on Fire and Strength Properties of Paper Made from Bagasse Soda Pulp [Volume 16, Issue 2, 2025, Pages 189-208]
Asghari, Milad Feasibility of using tragacanth gum and Poly Aluminum Chloride (PAC) for improving the paper recycling process [Volume 16, Issue 2, 2025, Pages 209-218]
Avazpour, Leila Analysis of Governance Modes and Resilience Assessment of Nature-Based Enterprises within the Framework of Sustainable Forest Management [Volume 16, Issue 4, 2026, Pages 619-641]
Azadi Boyaghchi, Mehrnaz FTIR-ATR spectroscopy: The method for identifying and separating the fibers of non-woody plants such as flax, hemp, kenaf and cotton [Volume 16, Issue 1, 2025, Pages 43-61]
B
Bakhshesh, Golbarg Analysis of Governance Modes and Resilience Assessment of Nature-Based Enterprises within the Framework of Sustainable Forest Management [Volume 16, Issue 4, 2026, Pages 619-641]
Bashardoust, Zeynab Production of Chemical pulp Using Carbonate Process from Wheat Straw [Volume 16, Issue 1, 2025, Pages 1-14]
D
Dehghani Firouzabadi, Mohammadreza Comparison on the Effect of Diammonium Phosphate and Sodium Silicate as Coating Materials on Fire and Strength Properties of Paper Made from Bagasse Soda Pulp [Volume 16, Issue 2, 2025, Pages 189-208]
Dehghani Firouzabadi, Mohammad Reza Investigating the effect of glycerol and polyvinyl alcohol in the production of antibacterial films from nanocrystals cellulose [Volume 16, Issue 1, 2025, Pages 89-107]
Doost, Arghavan Performance of sound absorption coefficient and sound transmission loss index in lightweight polymeric gypsum fiberboards with writing waste paper fibers [Volume 16, Issue 4, 2026, Pages 499-513]
E
Ebrahimpour Kasmani, Jafar Studying the effect of nanoclay on the mechanical, thermal and fire properties of composites made from ash wood flour and waste polypropylene [Volume 16, Issue 2, 2025, Pages 139-150]
Ebrahimpour Kasmani, Jafar The Effect of Nanographene, Fluorine, and Zein as Coating Pigments on the Physical and Mechanical Properties of Printing Paper [Volume 16, Issue 4, 2026, Pages 547-562]
Edalat, Hamid Reza The effect of thermal treatment of Paulownia wood species on the physical and mechanical properties of the resulting layered products [Volume 16, Issue 1, 2025, Pages 63-72]
Elyasi Kojabad, Mahdi Investigating the effect of coagulation and ozonation on enhancing the efficacy of membrane filtration for papermaking effluent treatment [Volume 16, Issue 1, 2025, Pages 109-123]
Eshghie, Foad Determining the optimal cycle of poplar cultivation under uncertainty conditions and considering the opportunity cost of agricultural land [Volume 16, Issue 2, 2025, Pages 165-187]
F
Faal shirkadeh, elmiira Comparison of the Biodegradation Efficiency of the Phaenerochaete chrysosporium and the Bacillus subtilis in Kraft Black Liquor [Volume 16, Issue 4, 2026, Pages 563-576]
Farokhpayam, Saeed Reza Improving the bending strength of fiberboard-polystyrene foam sandwich composite panels through designing grooves on the bottom surface of the outer layer [Volume 16, Issue 4, 2026, Pages 457-470]
Farsi, Mohammad The Effect of Nanographene, Fluorine, and Zein as Coating Pigments on the Physical and Mechanical Properties of Printing Paper [Volume 16, Issue 4, 2026, Pages 547-562]
Fathi Imanloo, Mozhgan Addition and retention of cellulose nanofibers to wet paper web without the use of retention aids and reduction of water drainage rate [Volume 16, Issue 1, 2025, Pages 29-42]
Ferdoesi Mehr, Hossein Analysis of the Competitive Structure of the Upholstered Furniture Industry in Tehran Province Using Porter’s Five Forces Model [Volume 16, Issue 4, 2026, Pages 533-546]
G
Ghadirzadeh, Erfan Studying the antibacterial properties of papers treated with extracts of leaves, bark and wood of two species of oak and eucalyptus [Volume 16, Issue 2, 2025, Pages 219-233]
Ghasemian, Ali Comparison on the Effect of Diammonium Phosphate and Sodium Silicate as Coating Materials on Fire and Strength Properties of Paper Made from Bagasse Soda Pulp [Volume 16, Issue 2, 2025, Pages 189-208]
Ghorbani, Mehdi Analysis of Governance Modes and Resilience Assessment of Nature-Based Enterprises within the Framework of Sustainable Forest Management [Volume 16, Issue 4, 2026, Pages 619-641]
Ghorbannezhad, Payam The Effect of Decorative Base Paper Grammage on Melamine Paper Properties [Volume 16, Issue 3, 2025, Pages 351-366]
H
Haghighi Poshtiri, Azar Investigation of the contact angle of wood impregnated with cellulose nanocrystals and its functionalized compounds [Volume 16, Issue 2, 2025, Pages 261-281]
Hajializadeh, Farajollah The role of Bacillus subtilis in the biological treatment of soda and kraft pulping wastewater [Volume 16, Issue 3, 2025, Pages 367-379]
Hajializadeh, Farajollah Investigation of the Effect of Energy Consumption on the Physical and Mechanical Properties of Cellulose Nanofibers Derived from Wheat Straw [Volume 16, Issue 3, 2025, Pages 399-413]
Hajializadeh, Farajollah Comparison of the Biodegradation Efficiency of the Phaenerochaete chrysosporium and the Bacillus subtilis in Kraft Black Liquor [Volume 16, Issue 4, 2026, Pages 563-576]
Hamzeh, Yahya Production of Chemical pulp Using Carbonate Process from Wheat Straw [Volume 16, Issue 1, 2025, Pages 1-14]
Hamzeh, Yahya Optimization of Biofuel Derived from Fast Pyrolysis of Kraft Lignin Using Heterogeneous Catalysts [Volume 16, Issue 3, 2025, Pages 333-349]
Hedjazi, Sahab Production of Chemical pulp Using Carbonate Process from Wheat Straw [Volume 16, Issue 1, 2025, Pages 1-14]
Hosseini Someah, Mohadeseh FTIR-ATR spectroscopy: The method for identifying and separating the fibers of non-woody plants such as flax, hemp, kenaf and cotton [Volume 16, Issue 1, 2025, Pages 43-61]
Hosseinzadeh, jaber Production and recovery of cellulosic biomass used in water filtration [Volume 16, Issue 4, 2026, Pages 471-482]
J
Jonoobi, Mehdi Investigation of the contact angle of wood impregnated with cellulose nanocrystals and its functionalized compounds [Volume 16, Issue 2, 2025, Pages 261-281]
Jourgholami, Meghdad Analysis of Governance Modes and Resilience Assessment of Nature-Based Enterprises within the Framework of Sustainable Forest Management [Volume 16, Issue 4, 2026, Pages 619-641]
K
Kazemi karchangi, Negin Studying the antibacterial properties of papers treated with extracts of leaves, bark and wood of two species of oak and eucalyptus [Volume 16, Issue 2, 2025, Pages 219-233]
Kermanian, Hossein Study of the effect of extractives, ash content, and density on the thermal conductivity in five wood species (Abies, Alnus glutinosa, Albizia julibrissin, Juglans regia, Platanus orientalis) [Volume 16, Issue 2, 2025, Pages 249-260]
Khademieslam, Habibollah Investigation of physical and mechanical properties of wood plastic composite after steaming and adding recycled polymer [Volume 16, Issue 4, 2026, Pages 591-604]
Khakifirooz, Alireza Preparation and Characterization of Antibacterial packaging board via coating with carboxymethyl cellulose and ciprofloxacin [Volume 16, Issue 4, 2026, Pages 483-497]
Khosravani, َAmir Evaluation of nano-sized fraction index as a benchmark parameter for cellulose nanofiber production [Volume 16, Issue 4, 2026, Pages 577-589]
Kord, Behzad Design and Synthesis of New Ionic Liquids as Pretreatment Agent of Wood Flour, and Studying Its Effects on the Physical, Mechanical and Viscoelastic Properties of Polyethylene-based Composites [Volume 16, Issue 3, 2025, Pages 415-435]
Kord, Behzad Preparation and Characterization of Antibacterial packaging board via coating with carboxymethyl cellulose and ciprofloxacin [Volume 16, Issue 4, 2026, Pages 483-497]
Korram, Khadijeh Evaluation of the efficiency of biodegradable cellulose hydrogels in removing metal ions [Volume 16, Issue 4, 2026, Pages 605-617]
M
Madhoushi, Mehrab The effect of thermal treatment of Paulownia wood species on the physical and mechanical properties of the resulting layered products [Volume 16, Issue 1, 2025, Pages 63-72]
Moezipour, Bita Investigation of the Effect of Energy Consumption on the Physical and Mechanical Properties of Cellulose Nanofibers Derived from Wheat Straw [Volume 16, Issue 3, 2025, Pages 399-413]
Moezipour, Bita Comparison of the Biodegradation Efficiency of the Phaenerochaete chrysosporium and the Bacillus subtilis in Kraft Black Liquor [Volume 16, Issue 4, 2026, Pages 563-576]
Mojaverian, Seyed Mojtaba Determining the optimal cycle of poplar cultivation under uncertainty conditions and considering the opportunity cost of agricultural land [Volume 16, Issue 2, 2025, Pages 165-187]
Moradi, Hossein Comparative Study of Cross-Sectional Wood Anatomy in Avicennia marina and Rhizophora mucronata [Volume 16, Issue 4, 2026, Pages 515-531]
Moradian, Mohammadhadi Addition and retention of cellulose nanofibers to wet paper web without the use of retention aids and reduction of water drainage rate [Volume 16, Issue 1, 2025, Pages 29-42]
Moradian, MohammadHadi Influence of Xylanase on the Viscosity and Mechanical Properties of Bagasse Pulp in ECF Bleaching Sequences [Volume 16, Issue 1, 2025, Pages 15-28]
Mousavi, ُSeyedeh Faegheh Evaluation of nano-sized fraction index as a benchmark parameter for cellulose nanofiber production [Volume 16, Issue 4, 2026, Pages 577-589]
Movahedi, Farnaz Design and Synthesis of New Ionic Liquids as Pretreatment Agent of Wood Flour, and Studying Its Effects on the Physical, Mechanical and Viscoelastic Properties of Polyethylene-based Composites [Volume 16, Issue 3, 2025, Pages 415-435]
Movahedi, Farnaz Preparation and Characterization of Antibacterial packaging board via coating with carboxymethyl cellulose and ciprofloxacin [Volume 16, Issue 4, 2026, Pages 483-497]
N
Nazarnezhad, Noureddin Synthesis of Glycerin-Calcium Carbonate Complex and Its Effect on Paper Tensile Strength [Volume 16, Issue 1, 2025, Pages 73-87]
Nejad Ebrahimie, Samad FTIR-ATR spectroscopy: The method for identifying and separating the fibers of non-woody plants such as flax, hemp, kenaf and cotton [Volume 16, Issue 1, 2025, Pages 43-61]
P
Parastar, Mehran Studying the antibacterial properties of papers treated with extracts of leaves, bark and wood of two species of oak and eucalyptus [Volume 16, Issue 2, 2025, Pages 219-233]
Parvizi, Sanaz Investigation of physical and mechanical properties of wood plastic composite after steaming and adding recycled polymer [Volume 16, Issue 4, 2026, Pages 591-604]
Poursartip, Ladan Influence of Xylanase on the Viscosity and Mechanical Properties of Bagasse Pulp in ECF Bleaching Sequences [Volume 16, Issue 1, 2025, Pages 15-28]
Pourtahmasi, Kambiz FTIR-ATR spectroscopy: The method for identifying and separating the fibers of non-woody plants such as flax, hemp, kenaf and cotton [Volume 16, Issue 1, 2025, Pages 43-61]
Q
Qaisari Asl, Fatemeh Influence of Xylanase on the Viscosity and Mechanical Properties of Bagasse Pulp in ECF Bleaching Sequences [Volume 16, Issue 1, 2025, Pages 15-28]
R
Rafiee, Hamed Analysis of the Competitive Structure of the Upholstered Furniture Industry in Tehran Province Using Porter’s Five Forces Model [Volume 16, Issue 4, 2026, Pages 533-546]
Rahgozar, Ali Investigating the effect of glycerol and polyvinyl alcohol in the production of antibacterial films from nanocrystals cellulose [Volume 16, Issue 1, 2025, Pages 89-107]
Rahimi, Atefe Optimization of Biofuel Derived from Fast Pyrolysis of Kraft Lignin Using Heterogeneous Catalysts [Volume 16, Issue 3, 2025, Pages 333-349]
Rahmaninia, Mehdi Feasibility of using tragacanth gum and Poly Aluminum Chloride (PAC) for improving the paper recycling process [Volume 16, Issue 2, 2025, Pages 209-218]
Rasooly Garmaroody, Esmaeil The Effect of Decorative Base Paper Grammage on Melamine Paper Properties [Volume 16, Issue 3, 2025, Pages 351-366]
RayatParvar, mehdi The Effect of Decorative Base Paper Grammage on Melamine Paper Properties [Volume 16, Issue 3, 2025, Pages 351-366]
Razavi, Mesam Evaluation of composite made of rice husk and gypsum using bacterial nanocellulose fiber (BNCF) [Volume 16, Issue 3, 2025, Pages 303-322]
Rezaei, Ebrahim Fabrication of Bio-Based Banana Fiber-Cement Composite and Evaluating its Technical Characteristics [Volume 16, Issue 3, 2025, Pages 437-455]
Rezanezhad, Shaghaygh Evaluation of the efficiency of biodegradable cellulose hydrogels in removing metal ions [Volume 16, Issue 4, 2026, Pages 605-617]
Rezayati Charani, Pejman Influence of Xylanase on the Viscosity and Mechanical Properties of Bagasse Pulp in ECF Bleaching Sequences [Volume 16, Issue 1, 2025, Pages 15-28]
Rezayati Charani, Pejman Addition and retention of cellulose nanofibers to wet paper web without the use of retention aids and reduction of water drainage rate [Volume 16, Issue 1, 2025, Pages 29-42]
Rezayati Charani, Pejman Evaluation of nano-sized fraction index as a benchmark parameter for cellulose nanofiber production [Volume 16, Issue 4, 2026, Pages 577-589]
Roohani, Mehdi Preparation and Characterization of Antibacterial packaging board via coating with carboxymethyl cellulose and ciprofloxacin [Volume 16, Issue 4, 2026, Pages 483-497]
Rostampour Haftkhani, akabar Comparison of the Biodegradation Efficiency of the Phaenerochaete chrysosporium and the Bacillus subtilis in Kraft Black Liquor [Volume 16, Issue 4, 2026, Pages 563-576]
S
Samariha, Ahmad Studying the effect of nanoclay on the mechanical, thermal and fire properties of composites made from ash wood flour and waste polypropylene [Volume 16, Issue 2, 2025, Pages 139-150]
Samariha, Ahmad The Effect of Nanographene, Fluorine, and Zein as Coating Pigments on the Physical and Mechanical Properties of Printing Paper [Volume 16, Issue 4, 2026, Pages 547-562]
Sarabi, Sadegh Improving the bending strength of fiberboard-polystyrene foam sandwich composite panels through designing grooves on the bottom surface of the outer layer [Volume 16, Issue 4, 2026, Pages 457-470]
Saraeyan, ahmadreza Production of Cellulose and Nanocellulose from Macroalgae as Novel Green Sustainable Bioresources [Volume 16, Issue 3, 2025, Pages 381-397]
Shahnoshi, Maria Determining the optimal cycle of poplar cultivation under uncertainty conditions and considering the opportunity cost of agricultural land [Volume 16, Issue 2, 2025, Pages 165-187]
Sharifi, Seyed Hassan Photocatalytic Degradation of Methylene Blue Dye by Cellulose Nanofibers/Nano ZnO/GO Nanobiocomposite [Volume 16, Issue 1, 2025, Pages 125-138]
Soleimani Lashkenari, mohammad Photocatalytic Degradation of Methylene Blue Dye by Cellulose Nanofibers/Nano ZnO/GO Nanobiocomposite [Volume 16, Issue 1, 2025, Pages 125-138]
T
Tabarsa, Taghi The effect of thermal treatment of Paulownia wood species on the physical and mechanical properties of the resulting layered products [Volume 16, Issue 1, 2025, Pages 63-72]
Taghizadeh, Fatemeh Photocatalytic Degradation of Methylene Blue Dye by Cellulose Nanofibers/Nano ZnO/GO Nanobiocomposite [Volume 16, Issue 1, 2025, Pages 125-138]
Tajik, Milad Study of the effect of extractives, ash content, and density on the thermal conductivity in five wood species (Abies, Alnus glutinosa, Albizia julibrissin, Juglans regia, Platanus orientalis) [Volume 16, Issue 2, 2025, Pages 249-260]
Taslimi, Mahsa Determining the optimal cycle of poplar cultivation under uncertainty conditions and considering the opportunity cost of agricultural land [Volume 16, Issue 2, 2025, Pages 165-187]
Y
Yavarian, Hamidreza Analysis and study of the concentration of the import market for Blockboard, Laminboard, and Battenboard in Iran [Volume 16, Issue 2, 2025, Pages 151-164]
Z
Zabihzadeh, Seyyd Majid Evaluation of the efficiency of biodegradable cellulose hydrogels in removing metal ions [Volume 16, Issue 4, 2026, Pages 605-617]
Zahedinour, Faranak Comparative Study of Cross-Sectional Wood Anatomy in Avicennia marina and Rhizophora mucronata [Volume 16, Issue 4, 2026, Pages 515-531]
Zarea Hosseinabadi, Hamid Manufacturing and Characterization of Binder-less Particleboard from Date Palm Residues [Volume 16, Issue 3, 2025, Pages 287-302]
Zarea Hosseinabadi, Hamid Fabrication of Bio-Based Banana Fiber-Cement Composite and Evaluating its Technical Characteristics [Volume 16, Issue 3, 2025, Pages 437-455]
