Abdolkhani, Ali Modeling and Predicting the optimal conditions in microcrystal cellulose production from bagasse using the Response Surface Methodology (RSM) [Volume 13, Issue 2, 2022, Pages 225-238]
Abdolkhani, Ali Production of nanocrystals and nanofibrils from unbleached and bleached soda pulp with ECFlight bleaching sequence and comparison of their morphological and thermal properties [Volume 13, Issue 4, 2023, Pages 457-471]
Abdolmaleki, Hamid Modeling and Predicting the optimal conditions in microcrystal cellulose production from bagasse using the Response Surface Methodology (RSM) [Volume 13, Issue 2, 2022, Pages 225-238]
Ahmadi, mohammad Strengthening of the cross-laminated timber using glass fiber-reinforced polymer on the lateral performance of the single shear lap joints [Volume 13, Issue 1, 2022, Pages 1-14]
Ahmadi, Mohammad Structural properties and thermal stability of nano crystalline cellulose produced from waste paper [Volume 13, Issue 1, 2022, Pages 37-47]
Ahmadi, Mohammad Investigation of using rice hask and paper waste to make free copper brake lining [Volume 13, Issue 1, 2022, Pages 61-70]
Ahmadi saeedabad, Fatemeh Life cycle assessment of SMF and GMF Fluting paper production process [Volume 13, Issue 3, 2022, Pages 249-259]
Akbarpour, Iman Environmental and strength properties evaluation of bleached recycled pulp with calcium hydroxide [Volume 13, Issue 1, 2022, Pages 71-81]
Akbarpour, Iman Investigation on the bleachability of hemicellulase-deinked pulp versus chemical deinking process [Volume 13, Issue 3, 2022, Pages 289-300]
Amini, Amir Investigation on the Possibility of Physical and Mechanical Properties Modification of Wood-Plastic Nanocomposites By Microwave Radiation [Volume 13, Issue 3, 2022, Pages 261-273]
Aminian, Hedayatollah Particles from grapevine pruning residue as a bio-based substitute for wood in hybrid particleboard production [Volume 13, Issue 4, 2023, Pages 509-518]
Aref, Masoumeh Investigating the effect of brand gender on brand loyalty with emphasis on the mediating role of brand love and perceived brand quality in Pak Choub Industrial Group [Volume 13, Issue 4, 2023, Pages 473-486]
AZADFALLAH, MOHAMMAD The effect of incorporating cellulose and chitosan nano-fibers into pigment coating formulation on the physical
and mechanical properties of Testliner [Volume 13, Issue 2, 2022, Pages 133-145]
Azizian Nasnar, Ali Environmental and strength properties evaluation of bleached recycled pulp with calcium hydroxide [Volume 13, Issue 1, 2022, Pages 71-81]
B
Bahmani, Mohsen Investigation of ِDecay Resistance of Poplar Plywood with Encapsulated Pesticides [Volume 13, Issue 2, 2022, Pages 201-212]
Broushakian, Vahid Moisture induced stresses in cross laminated timers (CLT) made from hydrothermally modified fir wood [Volume 13, Issue 4, 2023, Pages 497-507]
C
Chavooshi, Arash Simulation and prediction of bending performance of wood plastic composite profiles using finite element method by ANSYS Workbench software [Volume 13, Issue 3, 2022, Pages 325-344]
D
Dahmardeh Ghalehno, Mohammad Investigation of ِDecay Resistance of Poplar Plywood with Encapsulated Pesticides [Volume 13, Issue 2, 2022, Pages 201-212]
Dahmardeh Ghalehno, Mohammad Influence of additive of Chlorophytum comosum plant extract on physicochemical, structural and mechanical properties of urea formaldehyde resin [Volume 13, Issue 3, 2022, Pages 361-373]
Djafari Petroudy, Seyed Rahman Hydrogel composite based on thermal modified carboxymethyl cellulose and nanozeolite [Volume 13, Issue 4, 2023, Pages 433-443]
E
Ebrahimpour Kasmani, Jafar The effect of different additives on the properties of handsheet prepared from office waste paper [Volume 13, Issue 2, 2022, Pages 119-131]
EMAMINASAB, ,MOHAMMAD Modeling and Predicting the optimal conditions in microcrystal cellulose production from bagasse using the Response Surface Methodology (RSM) [Volume 13, Issue 2, 2022, Pages 225-238]
F
Farrokhpayam, Saeed reza Investigation of ِDecay Resistance of Poplar Plywood with Encapsulated Pesticides [Volume 13, Issue 2, 2022, Pages 201-212]
Farrokhpayam, Saeed reza Identification and determination of the effect of factory control variables on the physical and mechanical properties of medium density fiberboard with artificial neural network system [Volume 13, Issue 3, 2022, Pages 275-287]
Farsi, Mohammad Investigation on the Possibility of Physical and Mechanical Properties Modification of Wood-Plastic Nanocomposites By Microwave Radiation [Volume 13, Issue 3, 2022, Pages 261-273]
Feghhi, Zahra Investigation on the mechanical and optical properties of kraft paper coated with a combination of pectin, polyvinyl alcohol and nano titanium dioxide [Volume 13, Issue 1, 2022, Pages 15-25]
Fischer, Steffen Production of nanocrystals and nanofibrils from unbleached and bleached soda pulp with ECFlight bleaching sequence and comparison of their morphological and thermal properties [Volume 13, Issue 4, 2023, Pages 457-471]
G
Ghaffari Moghaddam, Mansour Investigation of the use of tetramethyl orthosilicate (Alkoxysilane) on compatibility, mechanical and physical properties of wood-cement particleboard [Volume 13, Issue 4, 2023, Pages 419-431]
Ghahramani, Saleh Production of nanocrystals and nanofibrils from unbleached and bleached soda pulp with ECFlight bleaching sequence and comparison of their morphological and thermal properties [Volume 13, Issue 4, 2023, Pages 457-471]
Ghasemi, haniyeh Investigation of the use of tetramethyl orthosilicate (Alkoxysilane) on compatibility, mechanical and physical properties of wood-cement particleboard [Volume 13, Issue 4, 2023, Pages 419-431]
Ghasemian, Ali Environmental and strength properties evaluation of bleached recycled pulp with calcium hydroxide [Volume 13, Issue 1, 2022, Pages 71-81]
Ghasemian, Ali Investigation on the bleachability of hemicellulase-deinked pulp versus chemical deinking process [Volume 13, Issue 3, 2022, Pages 289-300]
Ghofrani, Mohammad The study of Effective Factors On Selecting Finish Type and Color Spectrum and Finishing Method In The Industry Of Home Furniture (Case Study: Tehran Province) [Volume 13, Issue 2, 2022, Pages 147-160]
Gholamiyan, Hadi Wood anatomy and fiber biometry of pomegranate wood (Punica granutum L.) in a radial and longitudinal direction of tree [Volume 13, Issue 4, 2023, Pages 487-496]
Gholipour, Ali Investigating the effect of brand gender on brand loyalty with emphasis on the mediating role of brand love and perceived brand quality in Pak Choub Industrial Group [Volume 13, Issue 4, 2023, Pages 473-486]
Ghorbannezhad, Payam Performance of perlite as an adsorbent on the physical treatment of cellulose industry wastewater [Volume 13, Issue 3, 2022, Pages 313-323]
H
Haghighimanesh, Hossein Comparison of physical and mechanical properties of Pinus taeda wood with common fast-growing species [Volume 13, Issue 3, 2022, Pages 345-359]
Hajializadeh, Farajolah Strengthening of the cross-laminated timber using glass fiber-reinforced polymer on the lateral performance of the single shear lap joints [Volume 13, Issue 1, 2022, Pages 1-14]
Hajializadeh, Farajolah Structural properties and thermal stability of nano crystalline cellulose produced from waste paper [Volume 13, Issue 1, 2022, Pages 37-47]
Hajihassani, Reza Effect of brown rot fungus on the functional characteristics of heat treated wood [Volume 13, Issue 2, 2022, Pages 161-170]
Hamzeh, Yahya The effect of incorporating cellulose and chitosan nano-fibers into pigment coating formulation on the physical
and mechanical properties of Testliner [Volume 13, Issue 2, 2022, Pages 133-145]
Hasanpour, Ghazal Enhancement of recycled board strength by surface treatment and additives on size-press section [Volume 13, Issue 1, 2022, Pages 97-106]
Hedjazi, Sahab Production of nanocrystals and nanofibrils from unbleached and bleached soda pulp with ECFlight bleaching sequence and comparison of their morphological and thermal properties [Volume 13, Issue 4, 2023, Pages 457-471]
Heydari, Farzaneh Influence of additive of Chlorophytum comosum plant extract on physicochemical, structural and mechanical properties of urea formaldehyde resin [Volume 13, Issue 3, 2022, Pages 361-373]
Hoseinzadeh, Abolfazl Particles from grapevine pruning residue as a bio-based substitute for wood in hybrid particleboard production [Volume 13, Issue 4, 2023, Pages 509-518]
Hosseini, SeyedAli A Comparison on the performance of cationic starch in external and internal applications for recycled linerboard [Volume 13, Issue 3, 2022, Pages 301-311]
Hosseinzade, Jaber Modeling and Predicting the optimal conditions in microcrystal cellulose production from bagasse using the Response Surface Methodology (RSM) [Volume 13, Issue 2, 2022, Pages 225-238]
I
Izadyar, Soheila Production of nanocrystals and nanofibrils from unbleached and bleached soda pulp with ECFlight bleaching sequence and comparison of their morphological and thermal properties [Volume 13, Issue 4, 2023, Pages 457-471]
J
Jahan Latibari, Ahmad Investigation on the bleachability of hemicellulase-deinked pulp versus chemical deinking process [Volume 13, Issue 3, 2022, Pages 289-300]
Jamalirad, Loya Investigation of the mechanical-dynamic and thermal properties of nanocomposites manufactured from rapeseed stalk flour/ nanographene and high-density polyethylene [Volume 13, Issue 4, 2023, Pages 445-456]
Jamalirad, Loya Particles from grapevine pruning residue as a bio-based substitute for wood in hybrid particleboard production [Volume 13, Issue 4, 2023, Pages 509-518]
JAVID, EMAD The effect of incorporating cellulose and chitosan nano-fibers into pigment coating formulation on the physical
and mechanical properties of Testliner [Volume 13, Issue 2, 2022, Pages 133-145]
K
Karamdost Marian, Behrouz Comparison of physical and mechanical properties of Pinus taeda wood with common fast-growing species [Volume 13, Issue 3, 2022, Pages 345-359]
Kashkouli, Mahdi Performance of perlite as an adsorbent on the physical treatment of cellulose industry wastewater [Volume 13, Issue 3, 2022, Pages 313-323]
Khosravani, َAmir Enhancement of recycled board strength by surface treatment and additives on size-press section [Volume 13, Issue 1, 2022, Pages 97-106]
Khosravani, َAmir A Comparison on the performance of cationic starch in external and internal applications for recycled linerboard [Volume 13, Issue 3, 2022, Pages 301-311]
Khosravani, َAmir Fluorescent labling methods by rhodamine B isothiocyanate in cellulose Materials [Volume 13, Issue 4, 2023, Pages 405-417]
Kiaei, Majid Investigation on the Possibility of Physical and Mechanical Properties Modification of Wood-Plastic Nanocomposites By Microwave Radiation [Volume 13, Issue 3, 2022, Pages 261-273]
M
Maashi Sani, Fatemeh Investigation on the Possibility of Physical and Mechanical Properties Modification of Wood-Plastic Nanocomposites By Microwave Radiation [Volume 13, Issue 3, 2022, Pages 261-273]
Mahdavi, Saeed The effect of different additives on the properties of handsheet prepared from office waste paper [Volume 13, Issue 2, 2022, Pages 119-131]
Mansouri, Hamid Reza Influence of additive of Chlorophytum comosum plant extract on physicochemical, structural and mechanical properties of urea formaldehyde resin [Volume 13, Issue 3, 2022, Pages 361-373]
Masoumi, Abasali The study of Effective Factors On Selecting Finish Type and Color Spectrum and Finishing Method In The Industry Of Home Furniture (Case Study: Tehran Province) [Volume 13, Issue 2, 2022, Pages 147-160]
Mirjafari kanjani, ehsan Provide a strategic marketing model in the furniture industry based on exploratory mixed research plan [Volume 13, Issue 2, 2022, Pages 171-186]
Mohammadpour Kaliji, Majid Surface modification of cellulose nanocrystals using radio-frequency plasma [Volume 13, Issue 1, 2022, Pages 49-60]
Mohebby, Behbod Moisture induced stresses in cross laminated timers (CLT) made from hydrothermally modified fir wood [Volume 13, Issue 4, 2023, Pages 497-507]
Mousavi, Valiullah Investigating the bending creep behavior of poplar wood plastic plywood manufactured by thermoplastic films [Volume 13, Issue 4, 2023, Pages 393-403]
N
Nabavi, ashkan Life cycle assessment of SMF and GMF Fluting paper production process [Volume 13, Issue 3, 2022, Pages 249-259]
Najafi, Abdollah Investigating the bending creep behavior of poplar wood plastic plywood manufactured by thermoplastic films [Volume 13, Issue 4, 2023, Pages 393-403]
Nazerian, Morteza Performance of perlite as an adsorbent on the physical treatment of cellulose industry wastewater [Volume 13, Issue 3, 2022, Pages 313-323]
O
Orand, Mahin The effect of corn zein coating on the strength and barrier properties of liner paper [Volume 13, Issue 2, 2022, Pages 213-223]
P
Partovinia, Ali Performance of perlite as an adsorbent on the physical treatment of cellulose industry wastewater [Volume 13, Issue 3, 2022, Pages 313-323]
Piri, Mojtaba Investigation of ِDecay Resistance of Poplar Plywood with Encapsulated Pesticides [Volume 13, Issue 2, 2022, Pages 201-212]
Pizzi, Antonio Influence of additive of Chlorophytum comosum plant extract on physicochemical, structural and mechanical properties of urea formaldehyde resin [Volume 13, Issue 3, 2022, Pages 361-373]
R
Rahmaninia, Mehdi The Influence of Mixing Method of lignocellulosic Nanofibers with Recycled Pulp in the Presence of Microparticle System on the Final Paper Properties [Volume 13, Issue 1, 2022, Pages 103-113]
Rahmaninia, Mehdi A Comparison on the performance of cationic starch in external and internal applications for recycled linerboard [Volume 13, Issue 3, 2022, Pages 301-311]
Rangavar, Hossein Modification of The Beech (Fagus orientalis) Wood Properties via Electricity [Volume 13, Issue 1, 2022, Pages 27-35]
Rasooly Garmaroody, Esmail Hydrogel composite based on thermal modified carboxymethyl cellulose and nanozeolite [Volume 13, Issue 4, 2023, Pages 433-443]
Resalati, Hosain The effect of corn zein coating on the strength and barrier properties of liner paper [Volume 13, Issue 2, 2022, Pages 213-223]
Resalati, Hossein Investigation on the bleachability of hemicellulase-deinked pulp versus chemical deinking process [Volume 13, Issue 3, 2022, Pages 289-300]
Rostampour haftkhani, akbar Simulation and prediction of bending performance of wood plastic composite profiles using finite element method by ANSYS Workbench software [Volume 13, Issue 3, 2022, Pages 325-344]
Rostampour-Haftkhani, Aَkbar Strengthening of the cross-laminated timber using glass fiber-reinforced polymer on the lateral performance of the single shear lap joints [Volume 13, Issue 1, 2022, Pages 1-14]
Rudi, Hamidreza Effect of Self-assembly Layering Factors of Cationic Starch on Pulp Zeta Potential [Volume 13, Issue 1, 2022, Pages 83-96]
S
Samariha, Ahmad The effect of different additives on the properties of handsheet prepared from office waste paper [Volume 13, Issue 2, 2022, Pages 119-131]
Samariha, Ahmad The effect of heat treatment on anatomical, physical, color and mechanical properties of birch wood [Volume 13, Issue 4, 2023, Pages 519-529]
Sayadi Milani, Homa The Influence of Mixing Method of lignocellulosic Nanofibers with Recycled Pulp in the Presence of Microparticle System on the Final Paper Properties [Volume 13, Issue 1, 2022, Pages 103-113]
Sedghi, Mehrdad Particles from grapevine pruning residue as a bio-based substitute for wood in hybrid particleboard production [Volume 13, Issue 4, 2023, Pages 509-518]
Shamsian, Mohammad Investigation of the use of tetramethyl orthosilicate (Alkoxysilane) on compatibility, mechanical and physical properties of wood-cement particleboard [Volume 13, Issue 4, 2023, Pages 419-431]
Sharifi, Seyed Hassan Investigation on the mechanical and optical properties of kraft paper coated with a combination of pectin, polyvinyl alcohol and nano titanium dioxide [Volume 13, Issue 1, 2022, Pages 15-25]
Sharifi, Seyed Hassan Life cycle assessment of SMF and GMF Fluting paper production process [Volume 13, Issue 3, 2022, Pages 249-259]
Sheikhali, Hafezeh Fluorescent labling methods by rhodamine B isothiocyanate in cellulose Materials [Volume 13, Issue 4, 2023, Pages 405-417]
Sorinezami, Ziba Influence of additive of Chlorophytum comosum plant extract on physicochemical, structural and mechanical properties of urea formaldehyde resin [Volume 13, Issue 3, 2022, Pages 361-373]
T
Tajvidi, Mehdi Enhancement of recycled board strength by surface treatment and additives on size-press section [Volume 13, Issue 1, 2022, Pages 97-106]
Torkaman, Javad Modification of The Beech (Fagus orientalis) Wood Properties via Electricity [Volume 13, Issue 1, 2022, Pages 27-35]
Y
Yari Firouzabadi, Zahra Investigation of the mechanical-dynamic and thermal properties of nanocomposites manufactured from rapeseed stalk flour/ nanographene and high-density polyethylene [Volume 13, Issue 4, 2023, Pages 445-456]
Z
Zarea Hosseinabadi, Hamid Designing, Manufacturing and mechanical investigating of joint in laminated stringer of spiral stairs from poplar wood [Volume 13, Issue 3, 2022, Pages 375-391]
