Afra, Elyas Effect of Mixing Temperature of CMP Pulp and Cellulose Nanofiber on Paper Properties [Volume 3, Issue 2, 2013, Pages 77-90]
Alinia, Sahba Effect of Mixing Temperature of CMP Pulp and Cellulose Nanofiber on Paper Properties [Volume 3, Issue 2, 2013, Pages 77-90]
Azadfallah, Mohammad Influence of Recycling on Chemical Properties and Hornification of CMP and [Volume 3, Issue 1, 2012, Pages 99-108]
Azadfallah, Mohammad Properties Evaluation of High Density Polyethylene Composite Filled with Bagasse after Accelerated Weathered [Volume 3, Issue 2, 2013, Pages 119-130]
B
Behrooz, Rabi Investigation of Electro coagulation Process on TSS and COD Removal from Effluent of the Paper Recycling Mill Using Al Electrodes [Volume 3, Issue 2, 2013, Pages 53-64]
Besharati far, Kmran Study on Flexural Creep Parameters of Overlayed Particleboard by Natural and Melaminated Veneers [Volume 3, Issue 1, 2012, Pages 119-128]
C
Chavoshi, Arash Investigation on the withdrawal strength of screw, nail and water absorption of Nanoclay-MDF dust-PP composite [Volume 3, Issue 1, 2012, Pages 52-66]
D
Dalvand, Mosayeb Determination of Screw and Nail Withdrawal Strengths in Parallel and Perpendicular to Grain of some Hardwoods of Iran [Volume 3, Issue 2, 2013, Pages 171-180]
Darabi, Peyvand Properties Evaluation of High Density Polyethylene Composite Filled with Bagasse after Accelerated Weathered [Volume 3, Issue 2, 2013, Pages 119-130]
Darstan, Rasoul Papermaking Properties of Carpinus betulus with kraft, Soda and Soda-Urea Pulping Processes [Volume 3, Issue 2, 2013, Pages 105-117]
Dehghani, M.Reza A Comparison Between Alkali Peroxide and Activated Peroxide Processes in Bleaching Hardwoods Chemi-mechanical Pulp [Volume 3, Issue 2, 2013, Pages 91-103]
D.Hosseini, Kazem Study on the possibility of using bagasse in manufacture of sound-proof particleboard [Volume 3, Issue 1, 2012, Pages 43-52]
E
Ebrahimi, Ghanbar Study of Behavior and Measurement of Seismic Resistant Connections in Light Structural Frame Out of Aspen [Volume 3, Issue 1, 2012, Pages 81-97]
Ebrahimi, Ghanbar Investigation on Effect of Additives on Thermal Conductivity of Herbaceous Fiber Reinforced Cement Composite [Volume 3, Issue 2, 2013, Pages 39-52]
Elyasi, Abdollah Study on the possibility of using bagasse in manufacture of sound-proof particleboard [Volume 3, Issue 1, 2012, Pages 43-52]
F
Faezipour, M.Mahdi Investigation on Effect of Additives on Thermal Conductivity of Herbaceous Fiber Reinforced Cement Composite [Volume 3, Issue 2, 2013, Pages 39-52]
G
Ghahri, Saman A Study on Creep Behavior of Wood Flour- Recycled Polypropylene Composite [Volume 3, Issue 2, 2013, Pages 1-12]
Ghalandar zadeh, Abbas Study of Behavior and Measurement of Seismic Resistant Connections in Light Structural Frame Out of Aspen [Volume 3, Issue 1, 2012, Pages 81-97]
Ghasemian, Ali Investigation on the Physical and Mechanical Properties of Composites from Combined Recycled ONP-Glass Fibers with Polypropylene [Volume 3, Issue 1, 2012, Pages 29-42]
Gholamian, Hadi Determination of Screw and Nail Withdrawal Strengths in Parallel and Perpendicular to Grain of some Hardwoods of Iran [Volume 3, Issue 2, 2013, Pages 171-180]
Ghorbani, Maryam Study on the Effect of Heat Treatment on Physical Properties of Poplar and Beech Woods Impregnated with Nano-Copper and Nano-Silver [Volume 3, Issue 1, 2012, Pages 109-117]
H
Hamzeh, Yahya Influence of Recycling on Chemical Properties and Hornification of CMP and [Volume 3, Issue 1, 2012, Pages 99-108]
Hamzeh, Yahya Investigation on Effect of Additives on Thermal Conductivity of Herbaceous Fiber Reinforced Cement Composite [Volume 3, Issue 2, 2013, Pages 39-52]
Hemmat abadi, Hojjat Investigation of Electro coagulation Process on TSS and COD Removal from Effluent of the Paper Recycling Mill Using Al Electrodes [Volume 3, Issue 2, 2013, Pages 53-64]
I
Imani, Monireh Investigation on the Physical and Mechanical Properties of Composites from Combined Recycled ONP-Glass Fibers with Polypropylene [Volume 3, Issue 1, 2012, Pages 29-42]
J
Jalili, M.Mahdi A Study on Tensile Behavior and Water Uptake of Wood Powder-Composites Based on Epoxy and Unsaturated Polyester Resins [Volume 3, Issue 2, 2013, Pages 141-156]
K
Kamrani, Saeid The Investigation on Feasibility of Oriented Strand Boards to Parquet Production from Mixed Residual Veneer Popular and Beech [Volume 3, Issue 2, 2013, Pages 25-38]
Kargarfard, Abolfazl The Infuence of Coupling Agent and the Content of Fibers on Tensile Strength and Physical Properties of Cotton Fiber Stem/Recycled Polypropylene Composites [Volume 3, Issue 2, 2013, Pages 131-140]
Karimi, A.Naghi Properties Evaluation of High Density Polyethylene Composite Filled with Bagasse after Accelerated Weathered [Volume 3, Issue 2, 2013, Pages 119-130]
Kermanian, Hossein Effect of Lactase Enzyme on Delignification and Physical
Properties of OCC Pulp [Volume 3, Issue 2, 2013, Pages 157-170]
Khazaian, Abolghasem The Effect of Chemical Modification with Phenol Formaldehyde and Compression on Mechanical Properties of Paulownia (P.fortunie) Wood [Volume 3, Issue 1, 2012, Pages 13-27]
Khazaian, Abolghasem Study on Influensive Factors on Surface Quality and Edges of Through- Holes Bored in Particleboard and MDF [Volume 3, Issue 1, 2012, Pages 67-79]
K.Najafi, Saeid A Study on Creep Behavior of Wood Flour- Recycled Polypropylene Composite [Volume 3, Issue 2, 2013, Pages 1-12]
Kord, Behzad Study on Flexural Creep Parameters of Overlayed Particleboard by Natural and Melaminated Veneers [Volume 3, Issue 1, 2012, Pages 119-128]
Kord, Behzad Investigation on the Effect of Penetration Depth and Installing Method of Screw on Withdrawal Resistance in Face and Edge of Wood Plastic Composite [Volume 3, Issue 2, 2013, Pages 65-75]
M
Madhoushi, Mehrab Investigation on the withdrawal strength of screw, nail and water absorption of Nanoclay-MDF dust-PP composite [Volume 3, Issue 1, 2012, Pages 52-66]
Maleki, Sadegh Determination of Screw and Nail Withdrawal Strengths in Parallel and Perpendicular to Grain of some Hardwoods of Iran [Volume 3, Issue 2, 2013, Pages 171-180]
Masoumi, Zahra Study on Influensive Factors on Surface Quality and Edges of Through- Holes Bored in Particleboard and MDF [Volume 3, Issue 1, 2012, Pages 67-79]
Mirzaee, Ghane Collapsibility and Wettability of Hydrothermally Treated Wood [Volume 3, Issue 1, 2012, Pages 1-11]
Mirzazad, Fahimeh Influence of Recycling on Chemical Properties and Hornification of CMP and [Volume 3, Issue 1, 2012, Pages 99-108]
Mohammadzadeh, Kamel The Survey of Chemical Paper Pulp Properties Produced from Rice Straw Based on Formaldehyde Sulfide Method. [Volume 3, Issue 2, 2013, Pages 13-23]
Mohebbi, Behbood Collapsibility and Wettability of Hydrothermally Treated Wood [Volume 3, Issue 1, 2012, Pages 1-11]
Moradi, Masoumeh Effect of Lactase Enzyme on Delignification and Physical
Properties of OCC Pulp [Volume 3, Issue 2, 2013, Pages 157-170]
Moradifar, Alireza The Investigation on Feasibility of Oriented Strand Boards to Parquet Production from Mixed Residual Veneer Popular and Beech [Volume 3, Issue 2, 2013, Pages 25-38]
Mousavi, Saeid Effect of Lactase Enzyme on Delignification and Physical
Properties of OCC Pulp [Volume 3, Issue 2, 2013, Pages 157-170]
Musavi, Tahereh Study on Flexural Creep Parameters of Overlayed Particleboard by Natural and Melaminated Veneers [Volume 3, Issue 1, 2012, Pages 119-128]
Musavi, Yahya A Study on Tensile Behavior and Water Uptake of Wood Powder-Composites Based on Epoxy and Unsaturated Polyester Resins [Volume 3, Issue 2, 2013, Pages 141-156]
N
Naghizadeh, Zahra Investigation on Effect of Additives on Thermal Conductivity of Herbaceous Fiber Reinforced Cement Composite [Volume 3, Issue 2, 2013, Pages 39-52]
Najafi, Abdollah Study on Flexural Creep Parameters of Overlayed Particleboard by Natural and Melaminated Veneers [Volume 3, Issue 1, 2012, Pages 119-128]
Najafi, Abdollah Investigation on the Effect of Penetration Depth and Installing Method of Screw on Withdrawal Resistance in Face and Edge of Wood Plastic Composite [Volume 3, Issue 2, 2013, Pages 65-75]
Nazarnezhad, Noorodin Papermaking Properties of Carpinus betulus with kraft, Soda and Soda-Urea Pulping Processes [Volume 3, Issue 2, 2013, Pages 105-117]
P
Pirayeshfar, Amir hossein A Study on Tensile Behavior and Water Uptake of Wood Powder-Composites Based on Epoxy and Unsaturated Polyester Resins [Volume 3, Issue 2, 2013, Pages 141-156]
R
Ramezani, Omid Effect of Lactase Enzyme on Delignification and Physical
Properties of OCC Pulp [Volume 3, Issue 2, 2013, Pages 157-170]
Resalati, Hossein The Survey of Chemical Paper Pulp Properties Produced from Rice Straw Based on Formaldehyde Sulfide Method. [Volume 3, Issue 2, 2013, Pages 13-23]
Resalati, Hossein Effect of Mixing Temperature of CMP Pulp and Cellulose Nanofiber on Paper Properties [Volume 3, Issue 2, 2013, Pages 77-90]
Rezvani, Mohammad Investigation on the Effect of Penetration Depth and Installing Method of Screw on Withdrawal Resistance in Face and Edge of Wood Plastic Composite [Volume 3, Issue 2, 2013, Pages 65-75]
S
Sakalo, Mozhgan The Effect of Chemical Modification with Phenol Formaldehyde and Compression on Mechanical Properties of Paulownia (P.fortunie) Wood [Volume 3, Issue 1, 2012, Pages 13-27]
Seraian, A.Reza The Investigation on Feasibility of Oriented Strand Boards to Parquet Production from Mixed Residual Veneer Popular and Beech [Volume 3, Issue 2, 2013, Pages 25-38]
Shakeri, Alireza Investigation on the Physical and Mechanical Properties of Composites from Combined Recycled ONP-Glass Fibers with Polypropylene [Volume 3, Issue 1, 2012, Pages 29-42]
Shamsian, Mohammad Study of Behavior and Measurement of Seismic Resistant Connections in Light Structural Frame Out of Aspen [Volume 3, Issue 1, 2012, Pages 81-97]
Siahposht, Hassan Study on the Effect of Heat Treatment on Physical Properties of Poplar and Beech Woods Impregnated with Nano-Copper and Nano-Silver [Volume 3, Issue 1, 2012, Pages 109-117]
T
Tabarsa, Taghi Collapsibility and Wettability of Hydrothermally Treated Wood [Volume 3, Issue 1, 2012, Pages 1-11]
Taghiyari, Hamidreza Study on the Effect of Heat Treatment on Physical Properties of Poplar and Beech Woods Impregnated with Nano-Copper and Nano-Silver [Volume 3, Issue 1, 2012, Pages 109-117]
Tajvidi, Mahdi Properties Evaluation of High Density Polyethylene Composite Filled with Bagasse after Accelerated Weathered [Volume 3, Issue 2, 2013, Pages 119-130]
Tavasoli, Afshin Study on Influensive Factors on Surface Quality and Edges of Through- Holes Bored in Particleboard and MDF [Volume 3, Issue 1, 2012, Pages 67-79]
Y
Yadoollahi, Soghra The Investigation on Feasibility of Oriented Strand Boards to Parquet Production from Mixed Residual Veneer Popular and Beech [Volume 3, Issue 2, 2013, Pages 25-38]
Yousefi, Hossein Effect of Mixing Temperature of CMP Pulp and Cellulose Nanofiber on Paper Properties [Volume 3, Issue 2, 2013, Pages 77-90]
Z
Zabihzadeh, Majid Papermaking Properties of Carpinus betulus with kraft, Soda and Soda-Urea Pulping Processes [Volume 3, Issue 2, 2013, Pages 105-117]
Zeyni, Farhad A Comparison Between Alkali Peroxide and Activated Peroxide Processes in Bleaching Hardwoods Chemi-mechanical Pulp [Volume 3, Issue 2, 2013, Pages 91-103]
