Ebrahimi, Gh., 2013. Mechanics of wood and wood composites. Tehran university publications, Tehran, Iran: 181-236.
 Nakano, T., 1999. Analysis of creep of wood during water adsorption based on the excitation response theory. Journal of wood science, 45(1): 19-23.
 Cai, Z., Fridley, K.J., Hunt, M.C. and Rosowsky, D.V., 2002. Creep and creep – recovery models for wood under high stress levels. Wood and Fiber Science, 34(3): 425-433.
 Kojima, Y. and Yamamoto, H., 2004. Effect of microfibril angle on the longitudinal tensile creep behaviour of wood. Journal of Wood Science, 50 (4): 301-306.
 Kojima, Y. and Yamamoto, H., 2005. Effect of moisture content on the longitudinal tensile creep behaviour of wood. Journal of Wood Science, 51(5): 462-467.
 Roszyk, E., 2005. Effect of bending stresses on the wood creep in conditions of asymmetric changes in moisture content. Folia Forestalia Polonica,SeriesB, 36: 15–26.
 Kaboorani, A., Blanchet, P., and Laghdir, A., 2013. A rapid method to assess viscoelastic and mechano-sorptive creep in wood. Wood and fiber science, 45(4):370-382.
 Ma, X., Wang, G., Jiang, Z., Xian, Y. and Li, H., 2014. Comparison of bending creep behaviour bamboo-based composites manufactured by two types of stacking sequences. Bioresources 9(3): 5461-5472.
 Kiaei, M., 2012. Effect of site and elevation on wood density and shrinkage and their relationships in Carpinusbetulus, For. Stud. China, 14(3): 229-234.
 Ishimaru, Y., Oshima, K., and Iida, I., 2001. Changes in the mechanical properties of wood during a period of moisture conditioning. Journal of Wood Science, 47(4):254-261.
 Obataya, E., Norimoto, M. and Gril, J., 1998. The effects of adsorbed water on dynamic mechanical properties of wood. Polymer (Guildf), 39(14):3059-3064.
 Sayed-Ahmed, M.and Sennah, K., 2013. Effect of Temperature and Relative Humidity on Creep Deflection for Permanent Wood Foundation Panels. Montréal, Québec, Canadian Society for Civil Engineering, pp. 1-10.
 Zhan, J.F., Gu, J.Y. and Shi, S.Q., 2009. Rheological behaviour of larch timber during conventional drying. Drying Technology, 27(10): 1041-1050.
 Zhan, J.F., Gu, J.Y. and Ai, M.Y., 2004. The preliminary study on drying process traverse strains of Asian with pith. Scientia Silvae Sinicae, 40(5): 174-179.
 Rammer, D. R., 2010. Wood handbook: wood as an engineering material, General Technical Report FPL– GTR–190, Madison, Wisconsin: Forest Products Laboratory.
 Taniguchi, Y.and Ando, K., 2010: Time dependence of Poisson’s effect in wood: Volume change during uniaxial tensile creep. Journal of Wood Science, 56(2): 100-106.
 Moosavi, V., Khademi Eslam, H., Bazyar, B., Najafi, A. and Talaeepoor, M., 2016. Bending Creep Behavior of Hornbeam Wood. Drvna Industrija, 67(4): 341-350.
 Dong, F., Olsson, A. M. and Salmen, L., 2010: Fiber morphological effects on mechano-sorptive creep. Wood Science and Technology, 44(3): 475-483.
 Najafi, A. and Kazemi Najafi, S., 2009. Effect of load levels and plastic type on creep behavior of wood sawdust/HDPE composites. Journal of Reinforced Plastics and Composites, 28(21): 2645-2653.