بررسی اثر آمیختن پسماند ساقه کلزا به خرده های چوب و آمیختگی چسب ملامین و اوره فرم آلدهید بر ویژگی های تخته خرده ساخته شده

نوع مقاله : مقاله پژوهشی

نویسندگان

1 استادیار علوم و صنایع چوب و کاغذ، گروه سلولزی و بسته‌بندی، پژوهشکده شیمی و پتروشیمی، پژوهشگاه استاندارد

2 کارشناس ارشد، گروه علوم و صنایع چوب و کاغذ دانشگاه آزاد اسلامی واحد چالوس

3 استادیار علوم و صنایع چوب و کاغذ دانشگاه آزاد اسلامی واحد چالوس

چکیده

این تحقیق با هدف بررسی امکان استفاده از ساقه کلزا به صورت مخلوط با خرده چوب صنعتی در تولید تخته خرده چوب با دانسیته 7/0 گرم بر سانتی متر مکعب انجام شد. درصد اختلاط ساقه کلزا با خرده چوب صنعتی در پنج سطح 100- 0، 75- 25، 50- 50، 25- 75 و 0- 100، درصد اختلاط چسب ملامین با اوره فرمالدهید در سه سطح 100- 0، 85- 15 و 70- 30، و تخته ساخته شده به دو صورت همگن و لایه ای به عنوان عوامل متغیر درنظر گرفته شدند. چسب مصرفی به میزان10 درصد بر مبنای وزن خشک خرده چوب، کاتالیزور به میزان 2 درصد بر مبنای وزن خشک چسب، دما و زمان پرس به ترتیب 170 درجه سانتی گراد و 7 دقیقه، فشار پرس 30 کیلوگرم بر سانتی متر مربع و سرعت پرس 5/4 میلی متر بر دقیقه عوامل ثابت تحقیق بودند. بدین ترتیب تخته های آزمونی ساخته شده و خواص فیزیکی و مکانیکی تخته ها شامل مقاومت خمشی، مدول الاستیسیته، چسبندگی داخلی، جذب آب و واکشیدگی ضخامت بر طبق استاندارد EN اندازه گیری شد. نتایج نشان داد که با افزایش میزان ساقه کلزا در تخته ها، مقاومت خمشی، مدول الاستیسیته، جذب آب و واکشیدگی ضخامت افزایش یافته، در حالی که چسبندگی داخلی نمونه ها کاهش پیدا کرده است. همچنین استفاده از چسب ملامین اوره فرمالدهید در ساخت تخته خرده چوب سبب بهبود مقاومت مکانیکی و پایداری ابعاد نمونه ها شد.

کلیدواژه‌ها


[1] Ashori, A. and Nourbakhsh, A., 2008. Effect of press cycle time and resin content on physical and mechanical properties of particleboard panels made from the underutilized low-quality raw materials. Industrial Crops and products, (28): 225–230.
 [2] Nourbakhsh, A., Kargarfard, A. and Golbabaei, F., 2009. Investigation of physical and mechanical properties of paulownia wood in particleboard industry. Iranian Journal of Wood and Paper Science Research, 24(1): 15-25. (In Persian).
[3] Khalili Gashtrood Khani, A. and Mirzabeygi Azghandi, R., 2009. Investigation of particleboard with use of bagasse and haloxylon sp. Iranian Journal of Wood and Paper Science Research, 24(1): 99-116.( In Persian).
[4] Rangavar, H., Rasam, G. and Aghagolpour, V., 2011. Investigation on the possibility of using canola stem residues for particleboard manufacturing. Journal of Wood and Forest Science and Technology, 18(1): 91-104.( In Persian).
[5] Karegarfard, A., Nourbakhsh, A. and Golbabaee, F., 2006. Investigation on utilization of cotton stalk in particleboard production. Iranian Journal of Wood and Paper Science Research, 21(2): 95-104.( In Persian).
[6] Rassam, G.H., Rangavar, H., Taghiary H.R. and Taheri, A., 2012. Study on the Possibility of Using Sunflower Stalk in Particleboard Production. Iranian Journal of Wood and Paper Industries, 2(2): 83-97. (In Persian).
[7] Doosthoseini, K., 2001. Wood composite materials, manufacturing, applications, Tehran University Press, (In Persian).
[8] Colak, S., Colakoglu, G., Aydin, I. and Kalayycioglu, H., 2007. Effects of steaming process on some properties of Eucalyptus particleboard bonded with UF and MUF adhesives. Building and environment, 42: 304-309.
[9] European Standard EN 317., 1993. Particleboards and fiberboards, determination of swelling in thickness after immersion. European committee for standardization, Brussels, Belgium.
[10] European Standard EN 310., 1993. Wood-based panels, determination of modulus of elasticity in bending and of bending strength. European committee for standardization, Brussels, Belgium.
[11] European Standard EN 319. 1993. Particleboards and fiberboards, determination of tensile strength perpendicular to the plane of the board. European committee for standardization, Brussels, Belgium.
[12] Ghasemi, H., Jahan-Latibari, A., Roohnia, M. and Kohantorabi, M., 2014. Investigating the effect of canola particles on acoustic properties of particleboard. Iranian Journal of Wood and Paper Science Research, 29 (3): 399-410.( In Persian).
[13] Rassam, GH., Azadifard, M., Kargarfard, A. and Fazeli, F., 2014. Investigating the possibility of particleboard manufacture using corn (Zea mays L.)  stalks. Iranian Journal of Wood and Paper Industries, 28(4): 83-97.( In Persian).
[14] Bektas, I., Guler, C., Kalaycioglu, H., Mengenoglu, F. and Nacar, M., 2005. The manufacture of particleboards using sunflower stalks (Helianthusannuus I.) and poplar wood (Populus alba L.). Journal of Composite Materials, 39: 467–473.
 [15] Dahmardeh Ghalehno, M., Madhoushi, M., Tabarsa, T. and Nazerian, M., 2011. The manufacture of particleboards using mixture of reed (surface layer) and commercial species (middle layer). European Journal of Wood Product, 69(3): 341-344.
[16] Papadopoulos, A.N., Hill, C.A.S., Gkaraveli, A., Ntalos, G.A. and  Karastergiou, S.P., 2004. Bamboo chips (Bambusa vulgaris) as an alternative lignocellulosic raw material for particleboard manufacture. Holz Roh- Werkst, 62: 36–39.
[17] Khanjanzadeh, H., Bahmani, A., Rafighi, A. and Tabarsa, T., 2012. Utilization of bio-waste cotton (Gossypium hirsutum L.) stalks and underutilized paulownia (Paulownia fortunie) in wood-based composite particleboard. African journal biotechnology, 11(31): 8045-8050.
[18] Nemli, G.  and Aydin, A., 2007. Evaluation of the physical and mechanical properties of particleboard made from the needle litter of Pinus pinaster Ait. Industrial Crops and products, 26(3): 252–8.
[19] Ghotbodin, F., Khademieslam, H., Nourbakhsh, A. and Talaiepour, M., 2010. Effect of process variable on physical and mechanical properties of particleboard made of Alnus with UF and MUF. Iranian Journal of Wood and Paper Science Research, 25(2): 201-210. (In Persian).
[20] Bowyer, JL. and Stockman, VE., 2001. Agricultural residues: an exciting; biobased raw material for the global panel industry. Forest Product Journal, 51 (1): 10–21.
[21] European Standard EN 312-2., 1996. Particleboard-specification. part 3. requirements for board for interior fitments (including furniture) for use in dry conditions. European committee for standardization, Brussels, Belgium.
[22] Ghasemi, H., Jahan-Latibari, A., Kargarfard, A. and Lashgari, A., 2013. Investigation on the influence of the density reduction of the particleboard by  canola residues on the properties of particleboard. Iranian Journal of Wood and Paper Science Research ,28 (3): 463-475.( In Persian).
[23] Halip, J.A., Tahir, P.M., Choo, A. and Ashaari, Z., 2014. Effect of kenaf parts on the performance of single-layer and three- layer particleboard made from kenaf and rubberwood. Bioresources, 9(1): 1401-1416.