Abbasi, Zahra Comparing the effect of modification with different silane compounds on the chemical structure and physical properties of poplar wood [Volume 10, Issue 2, 2019, Pages 223-235]
Abdolkhani, Ali Using of xylanase and cold caustic extraction to remove hemicellulose from bagasse bleached pulp for dissolving pulp production [Volume 10, Issue 1, 2019, Pages 1-9]
Abdolkhani, Ali Synthesizing and Producing of Low Sensitive Nitrocellulose with Acetylation Method [Volume 10, Issue 2, 2019, Pages 175-187]
Abdolkhani, Ali Extraction of lignin with lignoboost process and production of water-soluble sulfonated derivatives from lignin of bagasse soda black liquor [Volume 10, Issue 2, 2019, Pages 237-247]
Abdolkhani, Ali Investigation on pulp production using γ-valerolactone organosolv process from birch wood [Volume 10, Issue 3, 2019, Pages 429-443]
Abdolkhani, Ali Chemical treatment of Bagasse by oxalic acid-choline chloride and lactic acid-choline chloride deep eutectic solvents [Volume 10, Issue 4, 2020, Pages 559-573]
Abedini, Raoufeh Comparing the effect of modification with different silane compounds on the chemical structure and physical properties of poplar wood [Volume 10, Issue 2, 2019, Pages 223-235]
Adeli, Kamran Competition, Monopoly and Concentration in Wood Pulp and Recovered Paper Import Market of Iran [Volume 10, Issue 1, 2019, Pages 101-113]
Adeli, Kamran Investigating the status of wood and its products Intra-industry trade in Iran [Volume 10, Issue 1, 2019, Pages 125-141]
Afra, Elyas Application of nano-titanium dioxide in the manufacture of Photocatalyst Securities Paper by controlled hydrolysis method [Volume 10, Issue 1, 2019, Pages 21-34]
Aghakhani, Mohammad The impact of different factors on particles quality and energy consumption in knife ring flaker [Volume 10, Issue 2, 2019, Pages 205-215]
Ahmadi, Mohammad Evaluation of the pulp properties produced from rice straw by monoethanolamine and potassium sulfite combined processes [Volume 10, Issue 1, 2019, Pages 77-87]
Ahmadi Ladjimi, Ali Effect of cationic polyDADMAC-based fixing agent on strength properties of OCC pulp [Volume 10, Issue 4, 2020, Pages 605-616]
Akbarnejad, Mehnaz Improving Weathering Performance of Beech Wood Coated with Acrylic Paint by nano zinc oxide and nano cellulose [Volume 10, Issue 2, 2019, Pages 311-321]
Amininasab, Seyed Mojtaba Comparing the effect of modification with different silane compounds on the chemical structure and physical properties of poplar wood [Volume 10, Issue 2, 2019, Pages 223-235]
Arjmand Kahagh, Sajjad The effect of residual xylan on cellulose nanofiber production through electrospinning of wheat straw [Volume 10, Issue 4, 2020, Pages 543-558]
Aryaie Monfared, Mohammad Hadi Investigate of Biometric andChemical Properties of Ammodendron persicum Fibers (Case Study; Zirkouh area - Qaenat City, South Khorasan, Iran) [Volume 10, Issue 1, 2019, Pages 49-62]
Asadpour, Ghasem Effect of the addition of bagasse and imported long fiber chemical pulps on the properties of chemical-mechanical pulp produced from hornbeam, beech and poplar mixture [Volume 10, Issue 1, 2019, Pages 143-152]
Ashori, Alireza The Effect of Concentration of Modified Cellulose NanoFibers by phthalimide on the Adsorption Rate of Carbon Dioxide (CO2) [Volume 10, Issue 3, 2019, Pages 397-406]
Azadfallah, Mohammad Effect of cationic polyDADMAC-based fixing agent on strength properties of OCC pulp [Volume 10, Issue 4, 2020, Pages 605-616]
Azizi, Majid The model of multiple criteria decision making to determine the optimal product and identify target markets based on poplar, alder and loblolly-pine [Volume 10, Issue 2, 2019, Pages 189-203]
Azizi Mossello, Ahmad The Effect of Protexin Enzyme for Bagasse Storage on Pulp and Paper Properties [Volume 10, Issue 3, 2019, Pages 457-468]
B
Badehian, Z Comparing the economic value of market function and unmarket function of some populus species [Volume 10, Issue 2, 2019, Pages 217-222]
Behrooz, Rabi The effect of kaolinite on the properties of lignocellulose superabsorbent from old corrugated container fiber fines [Volume 10, Issue 4, 2020, Pages 531-542]
C
Crestini, Claudia Identification and Evaluation of characteristics of Fractions of Industrial Softwood Kraft Lignin Separated by Single Step Fractionation [Volume 10, Issue 2, 2019, Pages 297-309]
D
Dastoorian, Foroogh Effect of press closing speed on stress relaxation and set recovery of densified alder wood [Volume 10, Issue 4, 2020, Pages 469-477]
Dehghan, Moein Effect of poly lactic acid on physical and mechanical properties of wood plastic composite [Volume 10, Issue 2, 2019, Pages 261-272]
Dehghani Firoozabadi, Mohammadreza Evaluation and comparision of mechanical and barrier properties of stone paper and gloss paper [Volume 10, Issue 3, 2019, Pages 373-384]
Dehghani Firouzabadi, Mohammadreza Effect of calendering on physical and mechanical properties of coated papers [Volume 10, Issue 2, 2019, Pages 273-285]
Dehghani Firouzabadi, M.R Evaluation of the starch films containing cellulose and lignocellulose for food packaging [Volume 10, Issue 1, 2019, Pages 35-47]
Djafari Petroudy, Seyed Rahman The effect of residual xylan on cellulose nanofiber production through electrospinning of wheat straw [Volume 10, Issue 4, 2020, Pages 543-558]
Doosthoseini, Kazem Fabrication of Bilayer Nanocellulosic Aerogel Scaffold and Evaluation of Its Properties for Skin Tissue engineering [Volume 10, Issue 2, 2019, Pages 287-296]
E
Ebrahimi, Ghanbar Investigating the stress carrying capacity of miter corner joints made with biscuit under diagonal tension and compression loading [Volume 10, Issue 3, 2019, Pages 323-336]
Ebrahimi Majdar, Reza Identification and Evaluation of characteristics of Fractions of Industrial Softwood Kraft Lignin Separated by Single Step Fractionation [Volume 10, Issue 2, 2019, Pages 297-309]
Efhamisisi, davod The evalaution of decay resistance and dimentional stability of poplar wood treated with Styrene/Nano wellastonite [Volume 10, Issue 3, 2019, Pages 445-455]
G
Ghaffari, Manssor Evaluation of the starch films containing cellulose and lignocellulose for food packaging [Volume 10, Issue 1, 2019, Pages 35-47]
Ghaffari, Manssor The investigation of the spraying of cellulose nanofibers (CNF) and Nano chitosan on the properties writing & printing (W&P) Paper [Volume 10, Issue 2, 2019, Pages 249-260]
Ghaffari, Reza Effect of press closing speed on stress relaxation and set recovery of densified alder wood [Volume 10, Issue 4, 2020, Pages 469-477]
Ghasemian, Ali The investigation of the spraying of cellulose nanofibers (CNF) and Nano chitosan on the properties writing & printing (W&P) Paper [Volume 10, Issue 2, 2019, Pages 249-260]
Ghasemian, Ali Identification and Evaluation of characteristics of Fractions of Industrial Softwood Kraft Lignin Separated by Single Step Fractionation [Volume 10, Issue 2, 2019, Pages 297-309]
Ghasemian, Ali The product of pulp from hornbeam with alkaline sulfite- AQ process [Volume 10, Issue 4, 2020, Pages 479-494]
Gholamiyan, Hadi Investigating the changes in the surface quality of common species in furniture industry using chemical vapors [Volume 10, Issue 1, 2019, Pages 63-75]
Gholamiyan, Hadi The possibility of designing and constructing standard tables and chairs with palm trunk [Volume 10, Issue 4, 2020, Pages 575-587]
H
Hamzeh, Yahya The influence of hot water pre-extraction of wheat straw hemicelluloses on monoethanolamine-AQ and soda-AQ pulp properties [Volume 10, Issue 3, 2019, Pages 361-372]
Hamzeh, Yahya Chemical treatment of Bagasse by oxalic acid-choline chloride and lactic acid-choline chloride deep eutectic solvents [Volume 10, Issue 4, 2020, Pages 559-573]
Hamzeh, Yahya Effect of cationic polyDADMAC-based fixing agent on strength properties of OCC pulp [Volume 10, Issue 4, 2020, Pages 605-616]
Hamzezadeh, Roghaye The evalaution of decay resistance and dimentional stability of poplar wood treated with Styrene/Nano wellastonite [Volume 10, Issue 3, 2019, Pages 445-455]
Hejazi, Sahab Evaluation of the pulp properties produced from rice straw by monoethanolamine and potassium sulfite combined processes [Volume 10, Issue 1, 2019, Pages 77-87]
Hosseini, S. Behnam The model of multiple criteria decision making to determine the optimal product and identify target markets based on poplar, alder and loblolly-pine [Volume 10, Issue 2, 2019, Pages 189-203]
Hosseini, Seyed Behnam The effect of the presence of skin on the mechanical properties of milkweed wood flour-plastic composite [Volume 10, Issue 1, 2019, Pages 115-124]
I
Ismaeilimoghadam, Saeed Effects of cellulose nano crystal addition on the properties of polyhydroxybutyrate-co-valerate (PHBV) films [Volume 10, Issue 1, 2019, Pages 153-164]
Izadyar, Soheila The evalaution of decay resistance and dimentional stability of poplar wood treated with Styrene/Nano wellastonite [Volume 10, Issue 3, 2019, Pages 445-455]
Izee, seddigheh Fabrication and properties evaluation of three layered transparent nanocomposite reinforced with cellulose and chitin nanofibers [Volume 10, Issue 4, 2020, Pages 495-505]
J
Jalali Torshizi, Hossein Effect of alum-dispersed rosin system on water absorption, strength and optical properties of papers made from recycled fibers [Volume 10, Issue 3, 2019, Pages 385-395]
Jalali Torshizi, Hossein Comparative study on natural cellulosic and synthesized aramid fibers on mechanical properties of epoxy composite [Volume 10, Issue 3, 2019, Pages 417-427]
Jonoobi, Mehdi Fabrication of Bilayer Nanocellulosic Aerogel Scaffold and Evaluation of Its Properties for Skin Tissue engineering [Volume 10, Issue 2, 2019, Pages 287-296]
Jonoobi, Mehdi The Effect of Concentration of Modified Cellulose NanoFibers by phthalimide on the Adsorption Rate of Carbon Dioxide (CO2) [Volume 10, Issue 3, 2019, Pages 397-406]
K
Kahvand, Mohammad Investigating the stress carrying capacity of miter corner joints made with biscuit under diagonal tension and compression loading [Volume 10, Issue 3, 2019, Pages 323-336]
Kalagar, Mehdi The model of multiple criteria decision making to determine the optimal product and identify target markets based on poplar, alder and loblolly-pine [Volume 10, Issue 2, 2019, Pages 189-203]
Karimi Mazraeshahi, Alinaghi The evalaution of decay resistance and dimentional stability of poplar wood treated with Styrene/Nano wellastonite [Volume 10, Issue 3, 2019, Pages 445-455]
Khalili, Ali Synthesizing and Producing of Low Sensitive Nitrocellulose with Acetylation Method [Volume 10, Issue 2, 2019, Pages 175-187]
Khazaian, Abolghasem The impact of different factors on particles quality and energy consumption in knife ring flaker [Volume 10, Issue 2, 2019, Pages 205-215]
Khosravani, amir The effect of kaolinite on the properties of lignocellulose superabsorbent from old corrugated container fiber fines [Volume 10, Issue 4, 2020, Pages 531-542]
Kolaei Moakher, Fatemeh Evaluation and comparision of mechanical and barrier properties of stone paper and gloss paper [Volume 10, Issue 3, 2019, Pages 373-384]
Koosha, Mojtaba Comparative study on natural cellulosic and synthesized aramid fibers on mechanical properties of epoxy composite [Volume 10, Issue 3, 2019, Pages 417-427]
L
Lange, Heiko Identification and Evaluation of characteristics of Fractions of Industrial Softwood Kraft Lignin Separated by Single Step Fractionation [Volume 10, Issue 2, 2019, Pages 297-309]
M
Mahdavi, saeid Comparison of non-woody biomass properties for energy generation [Volume 10, Issue 4, 2020, Pages 617-628]
Mashkour, Mahdi Improving Weathering Performance of Beech Wood Coated with Acrylic Paint by nano zinc oxide and nano cellulose [Volume 10, Issue 2, 2019, Pages 311-321]
Mohammadiamirabad, Leila Fabrication of Bilayer Nanocellulosic Aerogel Scaffold and Evaluation of Its Properties for Skin Tissue engineering [Volume 10, Issue 2, 2019, Pages 287-296]
Mohammadi limaei, Soleiman Comparison Study in the Clear Wood Estimation of the Beech tree trunk(Fagus orientalis Libsky) [Volume 10, Issue 1, 2019, Pages 11-19]
Mohammadi limaei, Soleiman Competition, Monopoly and Concentration in Wood Pulp and Recovered Paper Import Market of Iran [Volume 10, Issue 1, 2019, Pages 101-113]
Mohammadkazemi, Faranak Comparative study on natural cellulosic and synthesized aramid fibers on mechanical properties of epoxy composite [Volume 10, Issue 3, 2019, Pages 417-427]
Moradian Gilan, Kajal Using of xylanase and cold caustic extraction to remove hemicellulose from bagasse bleached pulp for dissolving pulp production [Volume 10, Issue 1, 2019, Pages 1-9]
Moradipour, Mehdi The model of multiple criteria decision making to determine the optimal product and identify target markets based on poplar, alder and loblolly-pine [Volume 10, Issue 2, 2019, Pages 189-203]
Mostafalo, Atefeh Effect of the addition of citric acid on particleboard properties [Volume 10, Issue 1, 2019, Pages 89-99]
N
Nazarnezhad, Nouredin Investigation of resistance and optical properties of the papers treated with cellulose nanocrystals and zinc oxide nanoparticles [Volume 10, Issue 3, 2019, Pages 407-415]
Nazerian, Morteza The effect of dimensional changes of flange and web in I-joist on its bending strength [Volume 10, Issue 4, 2020, Pages 507-520]
Nejati, Vahid The effect of kaolinite on the properties of lignocellulose superabsorbent from old corrugated container fiber fines [Volume 10, Issue 4, 2020, Pages 531-542]
O
OMRANI, PANTEA Investigating the stress carrying capacity of miter corner joints made with biscuit under diagonal tension and compression loading [Volume 10, Issue 3, 2019, Pages 323-336]
OMRANI, PANTEA Investigation of performance and fracture monitoring of dowel-welded joint by micrographs of scanning electron microscopy [Volume 10, Issue 4, 2020, Pages 589-603]
R
Rafighi, Ali The impact of different factors on particles quality and energy consumption in knife ring flaker [Volume 10, Issue 2, 2019, Pages 205-215]
Rahmaninia, Mehdi Effect of cationic polyDADMAC-based fixing agent on strength properties of OCC pulp [Volume 10, Issue 4, 2020, Pages 605-616]
Rasooly Garmaroody, Esmaeil Effect of structural characteristics of process water on paper properties made from recycled fiber [Volume 10, Issue 3, 2019, Pages 337-346]
Rasouli, Davood Fabrication and properties evaluation of three layered transparent nanocomposite reinforced with cellulose and chitin nanofibers [Volume 10, Issue 4, 2020, Pages 495-505]
Rasouli, Davood Improving Weathering Performance of Beech Wood Coated with Acrylic Paint by nano zinc oxide and nano cellulose [Volume 10, Issue 2, 2019, Pages 311-321]
Resalati, Hosain Application of nano-titanium dioxide in the manufacture of Photocatalyst Securities Paper by controlled hydrolysis method [Volume 10, Issue 1, 2019, Pages 21-34]
Resalati, Hosain Effect of calendering on physical and mechanical properties of coated papers [Volume 10, Issue 2, 2019, Pages 273-285]
Resalati, Hosain Effect of structural characteristics of process water on paper properties made from recycled fiber [Volume 10, Issue 3, 2019, Pages 337-346]
Resalati, Hosain The product of pulp from hornbeam with alkaline sulfite- AQ process [Volume 10, Issue 4, 2020, Pages 479-494]
Resalati, Hossein Identification and Evaluation of characteristics of Fractions of Industrial Softwood Kraft Lignin Separated by Single Step Fractionation [Volume 10, Issue 2, 2019, Pages 297-309]
Rezaian, Alireza The effect of dimensional changes of flange and web in I-joist on its bending strength [Volume 10, Issue 4, 2020, Pages 507-520]
Rezayati Charani, Pejman The Effect of Protexin Enzyme for Bagasse Storage on Pulp and Paper Properties [Volume 10, Issue 3, 2019, Pages 457-468]
Rostampour haftkhani, akbar Experimental study on flexural performance of poplar glued-laminated timber constructed by mechanical fastener and comparing them with those made with cold press [Volume 10, Issue 3, 2019, Pages 347-360]
Rudi, Hamidreza Effect of alum-dispersed rosin system on water absorption, strength and optical properties of papers made from recycled fibers [Volume 10, Issue 3, 2019, Pages 385-395]
S
Sadeghi Fard, Amir Hosien Effect of poly lactic acid on physical and mechanical properties of wood plastic composite [Volume 10, Issue 2, 2019, Pages 261-272]
Sam Daliri, Mostafa Effect of press closing speed on stress relaxation and set recovery of densified alder wood [Volume 10, Issue 4, 2020, Pages 469-477]
Samiee Kootenaee, mehdi Effect of structural characteristics of process water on paper properties made from recycled fiber [Volume 10, Issue 3, 2019, Pages 337-346]
Saraeian, Ahmadreza Identification and Evaluation of characteristics of Fractions of Industrial Softwood Kraft Lignin Separated by Single Step Fractionation [Volume 10, Issue 2, 2019, Pages 297-309]
Savari, Ahmad The Effect of Protexin Enzyme for Bagasse Storage on Pulp and Paper Properties [Volume 10, Issue 3, 2019, Pages 457-468]
Scholz, Frieder The impact of different factors on particles quality and energy consumption in knife ring flaker [Volume 10, Issue 2, 2019, Pages 205-215]
Seyednaseredin, Masoumeh The influence of hot water pre-extraction of wheat straw hemicelluloses on monoethanolamine-AQ and soda-AQ pulp properties [Volume 10, Issue 3, 2019, Pages 361-372]
Shaabani, Reza Effect of press closing speed on stress relaxation and set recovery of densified alder wood [Volume 10, Issue 4, 2020, Pages 469-477]
Shahraki, Afsaneh Effect of poly lactic acid on physical and mechanical properties of wood plastic composite [Volume 10, Issue 2, 2019, Pages 261-272]
Shahreki, Afsaneh Effects of cellulose nano crystal addition on the properties of polyhydroxybutyrate-co-valerate (PHBV) films [Volume 10, Issue 1, 2019, Pages 153-164]
Shakhes, Jalal Chemical treatment of Bagasse by oxalic acid-choline chloride and lactic acid-choline chloride deep eutectic solvents [Volume 10, Issue 4, 2020, Pages 559-573]
Shamsian, Mohammad The effect of dimensional changes of flange and web in I-joist on its bending strength [Volume 10, Issue 4, 2020, Pages 507-520]
Shokri, Shokoofeh Investigation on pulp production using γ-valerolactone organosolv process from birch wood [Volume 10, Issue 3, 2019, Pages 429-443]
Sixta, Herbert Using of xylanase and cold caustic extraction to remove hemicellulose from bagasse bleached pulp for dissolving pulp production [Volume 10, Issue 1, 2019, Pages 1-9]
Sixta, Herbert Investigation on pulp production using γ-valerolactone organosolv process from birch wood [Volume 10, Issue 3, 2019, Pages 429-443]
T
Taheri, Zohreh Effect of alum-dispersed rosin system on water absorption, strength and optical properties of papers made from recycled fibers [Volume 10, Issue 3, 2019, Pages 385-395]
Tatari, ali asghar Investigate of Biometric andChemical Properties of Ammodendron persicum Fibers (Case Study; Zirkouh area - Qaenat City, South Khorasan, Iran) [Volume 10, Issue 1, 2019, Pages 49-62]
V
Vatankhah, Elham The effect of residual xylan on cellulose nanofiber production through electrospinning of wheat straw [Volume 10, Issue 4, 2020, Pages 543-558]
Y
Yahyaei, seyed Mohammad Hossein Effect of press closing speed on stress relaxation and set recovery of densified alder wood [Volume 10, Issue 4, 2020, Pages 469-477]
Yari Firouzabadi, Zahra The effect of nano graphene particles on the Physical and mechanical of high density polyethylene-rapeseed stalk flour composites [Volume 10, Issue 4, 2020, Pages 629-641]
Yousefi, Hossein Improving Weathering Performance of Beech Wood Coated with Acrylic Paint by nano zinc oxide and nano cellulose [Volume 10, Issue 2, 2019, Pages 311-321]
