Abdolkhani, Ali Development of biodegradable antibacterial poly-lactic acid based packaging films with bioactive compounds [Volume 9, Issue 2, 2018, Pages 153-162]
Abdolkhani, Ali The use of lignocellulosic waste of rice straw for AO7 and RBB dyes adsorption from water [Volume 9, Issue 3, 2018, Pages 397-409]
Abdolkhani, Ali Comparing lignin derived from black liquors of alkaline sulfite-AQ, soda-AQ and kraft processes as a filler-extender in the poplar plywood [Volume 9, Issue 3, 2018, Pages 349-358]
Abdouss, majid The effect of nanoclay particles and compatibilization of oxidized polypropylene in molten phase on the mechanical and physical properties of wood-plastic composite [Volume 9, Issue 1, 2018, Pages 137-151]
Adeli, Kamran The future of wood products’ trade and industry in Iran [Volume 9, Issue 1, 2018, Pages 1-14]
Adeli, Kamran Preference of consumers in the selection of final woody products in different income quarters in households of Dorud City [Volume 9, Issue 2, 2018, Pages 175-185]
Adeli, Kamran The Effect of Targeted Subsidies on the Demand Patern of Wood and its Products in Khorramabad City [Volume 9, Issue 4, 2019, Pages 525-535]
Aghajani, Hamed Anatomical, Biometrical, Physical and Chemical properties of wild service tree (Sorbus torminalis L.) (Case study: Sangdeh forests of Mazandaran) [Volume 9, Issue 4, 2019, Pages 597-608]
Ahad nezhad, Maedeh Cellulose Extraction from Spirulina Wastes (Spirulina platensis) and Isolation of Cellulose Nanofiber from it [Volume 9, Issue 2, 2018, Pages 301-311]
Akhondzadeh Basti, Afshin Development of biodegradable antibacterial poly-lactic acid based packaging films with bioactive compounds [Volume 9, Issue 2, 2018, Pages 153-162]
Akhvan Sepahi, Abbas Cellulose Extraction from Spirulina Wastes (Spirulina platensis) and Isolation of Cellulose Nanofiber from it [Volume 9, Issue 2, 2018, Pages 301-311]
Aminian, Hedayatollah Using of mulberry branches
For particleboard manufacture [Volume 9, Issue 1, 2018, Pages 117-126]
Aminian, Hedayatollah The effect of using Alkali sulfit-Anthraquinone (AS-AQ) liquor powder as filler of urea formaldehyde resin on functional properties of plywood [Volume 9, Issue 3, 2018, Pages 337-347]
Amiri, Elmira Effect of Chitosan Electrostatic Charge on the Performance of Chitosan-Nanosilica in Recycled Old Corrugated Container Pulp [Volume 9, Issue 3, 2018, Pages 459-469]
Atun, Davod Effect of Applying Cellulose Nanofibers on the Properties of Multiply Paper Made from Recycled Fibers [Volume 9, Issue 3, 2018, Pages 359-369]
Azadi Bouyaghchi, mehrnaz Influence of the Alkalified Tragacanth Gum on optical and Mechanical Strenght of the Historical Paper Documents [Volume 9, Issue 2, 2018, Pages 209-222]
B
Badeian, Ziadin Preference of consumers in the selection of final woody products in different income quarters in households of Dorud City [Volume 9, Issue 2, 2018, Pages 175-185]
Bari, Ehsan Assesement of the Biodegradability of Composites produced from Poly-Lactic Acid and Bamboo Flour [Volume 9, Issue 4, 2019, Pages 537-548]
Bayat Kashkoli, ali Survey of Effective Criteria for Sustainable Development of Poplar Wood Farming in Iran by Pair Comparisons Method [Volume 9, Issue 2, 2018, Pages 235-249]
Bayrash, Majid Using of mulberry branches
For particleboard manufacture [Volume 9, Issue 1, 2018, Pages 117-126]
Bazvand, Maryam The Effect of Targeted Subsidies on the Demand Patern of Wood and its Products in Khorramabad City [Volume 9, Issue 4, 2019, Pages 525-535]
Bazyar, Behzad Effect of coating with Shellac on acoustic properties in white mulberry wood [Volume 9, Issue 1, 2018, Pages 27-40]
Belouri, behzad Cellulose Extraction from Spirulina Wastes (Spirulina platensis) and Isolation of Cellulose Nanofiber from it [Volume 9, Issue 2, 2018, Pages 301-311]
Borzacchiello, susi Nanocellulose based biohydrogel: Preparation and characterization of some properties [Volume 9, Issue 4, 2019, Pages 497-509]
D
Dastoorian, Foroogh Determination of elastic modulus of a natural fiber- thermoplastic composite [Volume 9, Issue 3, 2018, Pages 429-440]
Dehghan, Moein Assesement of the Biodegradability of Composites produced from Poly-Lactic Acid and Bamboo Flour [Volume 9, Issue 4, 2019, Pages 537-548]
Djafari Petroudy, seyedrahman The effect of bagasse pith xylose on yeast growth kinetic in bio-products manufacture [Volume 9, Issue 1, 2018, Pages 41-51]
Djafari Petroudy, Seyed Rahman Effect of Applying Cellulose Nanofibers on the Properties of Multiply Paper Made from Recycled Fibers [Volume 9, Issue 3, 2018, Pages 359-369]
E
Edalat, Hamidreza Performance improvement of PVAc glue in wood finger joints by using Isocyanate as a hardener [Volume 9, Issue 4, 2019, Pages 585-596]
Efhamisisi, Davood Borates and their applications to preserve wood-based composites [Volume 9, Issue 3, 2018, Pages 411-428]
Efhamisisi, Davood Anatomical, Biometrical, Physical and Chemical properties of wild service tree (Sorbus torminalis L.) (Case study: Sangdeh forests of Mazandaran) [Volume 9, Issue 4, 2019, Pages 597-608]
Esfandyari, Masoud Preference of consumers in the selection of final woody products in different income quarters in households of Dorud City [Volume 9, Issue 2, 2018, Pages 175-185]
F
Faezipour, Mohammadmahdi Assesement of the Biodegradability of Composites produced from Poly-Lactic Acid and Bamboo Flour [Volume 9, Issue 4, 2019, Pages 537-548]
Fayazfar, Samira Development of biodegradable antibacterial poly-lactic acid based packaging films with bioactive compounds [Volume 9, Issue 2, 2018, Pages 153-162]
Fazei pour, Mehdi Nanocellulose based biohydrogel: Preparation and characterization of some properties [Volume 9, Issue 4, 2019, Pages 497-509]
G
Ghasemian, Ali Production of dissolving pulp from populus deltoides wood utilizing alkaline pre-extraction followed by soda-AQ pulping process [Volume 9, Issue 2, 2018, Pages 289-298]
Gholamiyan, Hadi The Effect of layers made off clear coats on the color changes and surface quality of wood after accelerated weathering in urban furniture [Volume 9, Issue 4, 2019, Pages 561-574]
GHorbani, Maryam Investigation on the physical properties and internal bonding of HDF made of oxidized fiber [Volume 9, Issue 1, 2018, Pages 127-135]
H
Hajighasem, Mona Effect of coating with Shellac on acoustic properties in white mulberry wood [Volume 9, Issue 1, 2018, Pages 27-40]
Hajipour, Hedieh Comparing lignin derived from black liquors of alkaline sulfite-AQ, soda-AQ and kraft processes as a filler-extender in the poplar plywood [Volume 9, Issue 3, 2018, Pages 349-358]
Hamzeh, Yahya The use of lignocellulosic waste of rice straw for AO7 and RBB dyes adsorption from water [Volume 9, Issue 3, 2018, Pages 397-409]
Hamzeh, Yahya Borates and their applications to preserve wood-based composites [Volume 9, Issue 3, 2018, Pages 411-428]
Harati Moghadam, Zahra Production of Phenol-urea-formaldehyde Resin (PUF) and Investigation of its Resistive Properties in Particleboard [Volume 9, Issue 4, 2019, Pages 609-619]
Hedjazi, sahab Investigation on the Influence of Alkaline Pre-Extraction of Barley Straw on Soda and Monoethanolamine Pulps Properties [Volume 9, Issue 4, 2019, Pages 485-495]
Hedjazi, Sahab The use of lignocellulosic waste of rice straw for AO7 and RBB dyes adsorption from water [Volume 9, Issue 3, 2018, Pages 397-409]
Hedjazi, Sahab The effect of using Alkali sulfit-Anthraquinone (AS-AQ) liquor powder as filler of urea formaldehyde resin on functional properties of plywood [Volume 9, Issue 3, 2018, Pages 337-347]
Hodges, Donald G. The future of wood products’ trade and industry in Iran [Volume 9, Issue 1, 2018, Pages 1-14]
I
Izadyar, soheila The use of lignocellulosic waste of rice straw for AO7 and RBB dyes adsorption from water [Volume 9, Issue 3, 2018, Pages 397-409]
J
Jafarnezhad, Saber Effect of the Expanded Polystyrene Granules on the Physical and Mechanical Properties of Hybrid Lightweight Panels [Volume 9, Issue 3, 2018, Pages 383-396]
Jalali Torshizi, Hosein Effect of Applying Cellulose Nanofibers on the Properties of Multiply Paper Made from Recycled Fibers [Volume 9, Issue 3, 2018, Pages 359-369]
Jalali Torshizi, hossein The effect of cellulose nanofibres on cationic starch efficiency in pulp and paper recycled from packaging waste paper [Volume 9, Issue 2, 2018, Pages 187-197]
Jamalirad, loya Using of mulberry branches
For particleboard manufacture [Volume 9, Issue 1, 2018, Pages 117-126]
Jonoobi, mahdi Cellulose Extraction from Spirulina Wastes (Spirulina platensis) and Isolation of Cellulose Nanofiber from it [Volume 9, Issue 2, 2018, Pages 301-311]
Jonoobi, mahdi Nanocellulose based biohydrogel: Preparation and characterization of some properties [Volume 9, Issue 4, 2019, Pages 497-509]
Jourgholami, Meghdad Evaluation of the effect of chainsaw vibration on user's hand and arm during log bucking operations [Volume 9, Issue 4, 2019, Pages 471-483]
K
Karimi, Abdollah The effect of using Alkali sulfit-Anthraquinone (AS-AQ) liquor powder as filler of urea formaldehyde resin on functional properties of plywood [Volume 9, Issue 3, 2018, Pages 337-347]
Kazemi Najafi, Saeed Production of Phenol-urea-formaldehyde Resin (PUF) and Investigation of its Resistive Properties in Particleboard [Volume 9, Issue 4, 2019, Pages 609-619]
Khajavi, Somayeh Evaluation of the effect of chainsaw vibration on user's hand and arm during log bucking operations [Volume 9, Issue 4, 2019, Pages 471-483]
Khazaeian, Abolghasem Investigation of Embedment Strength of Metal Fasteners In Wood Engineered Product And Comparison With EC 5 Predicted Values [Volume 9, Issue 1, 2018, Pages 87-101]
Khazaian, Abolghasem Investigation of the impact resistance of the plywood made with adhesive enhanced with Cellulose Nanofibers [Volume 9, Issue 2, 2018, Pages 263-275]
Khazaian, Abolghasem The Effect of Storage Time of Hornbeam Billet Wood on its Physical and Mechanical Properties in the Forest (Case Study of Gorgan Shastkalateh Forest) [Volume 9, Issue 4, 2019, Pages 511-524]
Khosravani, amir The effect of addition of lignocellulose nanofiber produced from old corrugated container pulp on recycled paperboard properties [Volume 9, Issue 4, 2019, Pages 575-584]
Khosravani, Amir The effect of dissolution time on wettability and certain properties of cellulose film produced using ionic liquid [Volume 9, Issue 2, 2018, Pages 223-234]
Khosravani, Amir Effect of Chitosan Electrostatic Charge on the Performance of Chitosan-Nanosilica in Recycled Old Corrugated Container Pulp [Volume 9, Issue 3, 2018, Pages 459-469]
Khosravi, Sheyda The future of wood products’ trade and industry in Iran [Volume 9, Issue 1, 2018, Pages 1-14]
Kiaie, Majid The effect of load and relative humidity on bending creep behaviour of hornbeam in three altitudes (Case Study, Nowshahr Meshelak Branch) [Volume 9, Issue 1, 2018, Pages 15-26]
Kool, Farhad Anatomical, Biometrical, Physical and Chemical properties of wild service tree (Sorbus torminalis L.) (Case study: Sangdeh forests of Mazandaran) [Volume 9, Issue 4, 2019, Pages 597-608]
L
Liaghat, GholamHossein Investigation of the impact resistance of the plywood made with adhesive enhanced with Cellulose Nanofibers [Volume 9, Issue 2, 2018, Pages 263-275]
Luedtke, Jan Effect of the Expanded Polystyrene Granules on the Physical and Mechanical Properties of Hybrid Lightweight Panels [Volume 9, Issue 3, 2018, Pages 383-396]
M
Madhoushi, Mehrab Investigation of Embedment Strength of Metal Fasteners In Wood Engineered Product And Comparison With EC 5 Predicted Values [Volume 9, Issue 1, 2018, Pages 87-101]
Mahboobian, Mohammad Mehdi Nanocellulose based biohydrogel: Preparation and characterization of some properties [Volume 9, Issue 4, 2019, Pages 497-509]
Majnounain, Baris Evaluation of the effect of chainsaw vibration on user's hand and arm during log bucking operations [Volume 9, Issue 4, 2019, Pages 471-483]
Maleknia, Rahim The future of wood products’ trade and industry in Iran [Volume 9, Issue 1, 2018, Pages 1-14]
Mansouri, Hamid Reza Production of Phenol-urea-formaldehyde Resin (PUF) and Investigation of its Resistive Properties in Particleboard [Volume 9, Issue 4, 2019, Pages 609-619]
Mesgarhaye Kashani, Mohammad Hasan Improving the mechanical and physical properties of particleboard produced from bamboo- industrial wood using polypropylene powder [Volume 9, Issue 2, 2018, Pages 199-208]
Misaghi, Ali Development of biodegradable antibacterial poly-lactic acid based packaging films with bioactive compounds [Volume 9, Issue 2, 2018, Pages 153-162]
Mohammadi, nasibeh Investigation on the Influence of Alkaline Pre-Extraction of Barley Straw on Soda and Monoethanolamine Pulps Properties [Volume 9, Issue 4, 2019, Pages 485-495]
Mohebbi Gargari, Rahim The effect of nanoclay particles and compatibilization of oxidized polypropylene in molten phase on the mechanical and physical properties of wood-plastic composite [Volume 9, Issue 1, 2018, Pages 137-151]
Mohebbi Gargari, Rahim Survey of Effective Criteria for Sustainable Development of Poplar Wood Farming in Iran by Pair Comparisons Method [Volume 9, Issue 2, 2018, Pages 235-249]
Mohebby, Behbood The effect of dissolution time on wettability and certain properties of cellulose film produced using ionic liquid [Volume 9, Issue 2, 2018, Pages 223-234]
Mohseni, Reza The future of wood products’ trade and industry in Iran [Volume 9, Issue 1, 2018, Pages 1-14]
Motie, Nazanin Nanocellulose based biohydrogel: Preparation and characterization of some properties [Volume 9, Issue 4, 2019, Pages 497-509]
Mousavi, Valiullah The effect of load and relative humidity on bending creep behaviour of hornbeam in three altitudes (Case Study, Nowshahr Meshelak Branch) [Volume 9, Issue 1, 2018, Pages 15-26]
N
Najafi, Abdollah The effect of load and relative humidity on bending creep behaviour of hornbeam in three altitudes (Case Study, Nowshahr Meshelak Branch) [Volume 9, Issue 1, 2018, Pages 15-26]
Nikkhah Dafchahi, Mostafa Production of dissolving pulp from populus deltoides wood utilizing alkaline pre-extraction followed by soda-AQ pulping process [Volume 9, Issue 2, 2018, Pages 289-298]
Nosrati Sheshkal, Babak The effect of nanoclay particles and compatibilization of oxidized polypropylene in molten phase on the mechanical and physical properties of wood-plastic composite [Volume 9, Issue 1, 2018, Pages 137-151]
R
Rahimi, Atefe The use of lignocellulosic waste of rice straw for AO7 and RBB dyes adsorption from water [Volume 9, Issue 3, 2018, Pages 397-409]
Rahmaninia, Mehdi Effect of Chitosan Electrostatic Charge on the Performance of Chitosan-Nanosilica in Recycled Old Corrugated Container Pulp [Volume 9, Issue 3, 2018, Pages 459-469]
Rasooly Garmaroody, esmaeil The effect of bagasse pith xylose on yeast growth kinetic in bio-products manufacture [Volume 9, Issue 1, 2018, Pages 41-51]
Reisi, Marzie Investigation of Embedment Strength of Metal Fasteners In Wood Engineered Product And Comparison With EC 5 Predicted Values [Volume 9, Issue 1, 2018, Pages 87-101]
Reisi, Marzie Performance improvement of PVAc glue in wood finger joints by using Isocyanate as a hardener [Volume 9, Issue 4, 2019, Pages 585-596]
Resalati, Hossein Production of dissolving pulp from populus deltoides wood utilizing alkaline pre-extraction followed by soda-AQ pulping process [Volume 9, Issue 2, 2018, Pages 289-298]
Rezaeigolesani, Mohammadreza Development of biodegradable antibacterial poly-lactic acid based packaging films with bioactive compounds [Volume 9, Issue 2, 2018, Pages 153-162]
Rezayati Charani, Pejman Improving wet tensile strength of paper glass using PAE, CNF and CMC [Volume 9, Issue 2, 2018, Pages 163-173]
Rezvani, Mohammad Hadi Investigation of physical and mechanical performance of wood-based composites after laboratory accelerated aging [Volume 9, Issue 1, 2018, Pages 103-117]
Roohnia, mehran Acoustically quality evaluation of date palm samples from the pith to the bark [Volume 9, Issue 1, 2018, Pages 65-74]
Roohnia, Mehran Effect of coating with Shellac on acoustic properties in white mulberry wood [Volume 9, Issue 1, 2018, Pages 27-40]
S
Sadeghi Nik, َBehnam The effect of dissolution time on wettability and certain properties of cellulose film produced using ionic liquid [Volume 9, Issue 2, 2018, Pages 223-234]
Salari, Ayoub Investigation of the effect of modified poly vinyl acetate on the stress carrying capacity of corner joints in the wood members joined with dowel [Volume 9, Issue 3, 2018, Pages 323-336]
Salmani, Unes The Effect of Targeted Subsidies on the Demand Patern of Wood and its Products in Khorramabad City [Volume 9, Issue 4, 2019, Pages 525-535]
Saraeyan, Ahmad Reza Production of dissolving pulp from populus deltoides wood utilizing alkaline pre-extraction followed by soda-AQ pulping process [Volume 9, Issue 2, 2018, Pages 289-298]
Sedghi, Mehrdad Effect Of Paper Deacidification With Nano Calcium Hydroxide and Nano Hydroxyapatite, With Nano Cellulose And Nano Chitosan On Its Anti-Fungal Properties [Volume 9, Issue 1, 2018, Pages 53-63]
Sedghi, Mehrdad EFFECT OF DRY- HEAT AND MOIST-HEAT AGING ON PROPERTIES OF PAPERS TREATED WITH NANO CALCIUM HYDROXIDE AND NANO CHITOSAN [Volume 9, Issue 2, 2018, Pages 277-288]
Shabanpour, Saeb Investigation on the physical properties and internal bonding of HDF made of oxidized fiber [Volume 9, Issue 1, 2018, Pages 127-135]
Shafiei Amrehei, Seyyedeh Sheyda The effect of bagasse pith xylose on yeast growth kinetic in bio-products manufacture [Volume 9, Issue 1, 2018, Pages 41-51]
Shakeri, Ali Reza Production of dissolving pulp from populus deltoides wood utilizing alkaline pre-extraction followed by soda-AQ pulping process [Volume 9, Issue 2, 2018, Pages 289-298]
Shalbafan, Ali Effect of the Expanded Polystyrene Granules on the Physical and Mechanical Properties of Hybrid Lightweight Panels [Volume 9, Issue 3, 2018, Pages 383-396]
Soheilipour, azam Influence of the Alkalified Tragacanth Gum on optical and Mechanical Strenght of the Historical Paper Documents [Volume 9, Issue 2, 2018, Pages 209-222]
T
Tajick Ghanbary, Mohammad Ali Effect of environmental changes (temprature and moisture) on destructive behaviour of the white rot fungus Trametes versicolor on chestnut-leaved oak [Volume 9, Issue 1, 2018, Pages 75-85]
Talaei, Aisona Investigation of physical and mechanical performance of wood-based composites after laboratory accelerated aging [Volume 9, Issue 1, 2018, Pages 103-117]
Tarmina, Asghar The Effect of layers made off clear coats on the color changes and surface quality of wood after accelerated weathering in urban furniture [Volume 9, Issue 4, 2019, Pages 561-574]
V
Vaziri, Vahid Using of mulberry branches
For particleboard manufacture [Volume 9, Issue 1, 2018, Pages 117-126]
Y
Yousefhashemi, Seyed Mehdi The effect of addition of lignocellulose nanofiber produced from old corrugated container pulp on recycled paperboard properties [Volume 9, Issue 4, 2019, Pages 575-584]
Yousefi, Hossein Investigation of the impact resistance of the plywood made with adhesive enhanced with Cellulose Nanofibers [Volume 9, Issue 2, 2018, Pages 263-275]
Yousefi, Hossein The effect of dissolution time on wettability and certain properties of cellulose film produced using ionic liquid [Volume 9, Issue 2, 2018, Pages 223-234]
Yousefi, Hossein The effect of addition of lignocellulose nanofiber produced from old corrugated container pulp on recycled paperboard properties [Volume 9, Issue 4, 2019, Pages 575-584]
Yousefi Lonbar, Samaneh Investigation of physical and mechanical performance of wood-based composites after laboratory accelerated aging [Volume 9, Issue 1, 2018, Pages 103-117]
Z
Zarea Hosseinabadi, Hamid Investigation on fracture toughness and internal bonding of oriented strand board (OSB) made from Poplar [Volume 9, Issue 4, 2019, Pages 549-559]
