Abdolkhani, Ali Improvement of Physical and Mechanical Properties of Testliner Coated by Unmodified and Modified Lignins [Volume 14, Issue 1, 2023, Pages 1-15]
Abdolkhani, Ali Investigating the thermal properties of bio -adhesive tanic acid and gallic acid with furfural [Volume 14, Issue 1, 2023, Pages 55-63]
Abdolkhani, Ali Investigation on the Potential of Using the Residual Fibers from Fractionation of Canola Stalk with Glycerol in Pulp Production [Volume 14, Issue 2, 2023, Pages 139-153]
Abdolkhani, Ali Investigation of the properties of modified lignin-derived porous carbon for Lead removal [Volume 14, Issue 3, 2023, Pages 327-338]
Abyaz, Ali The effect of submicron cellulose binder on the properties of briquettes made from bagasse and rapeseed [Volume 14, Issue 3, 2023, Pages 243-251]
Adeli, Kamran Estimating the demand for recycled paper in Iran: based on the ARDL approach [Volume 14, Issue 3, 2023, Pages 285-298]
Afra, Elyas Production of Binderless Fuel Briquettes from Lignocellulosic Residues of Paulownia, Corn Stalks and Waste Paper Pulp at Low Pressures [Volume 14, Issue 3, 2023, Pages 227-242]
Afra, Elyas Effect of using Almond shell flour and OCC on the properties of the production briquette [Volume 14, Issue 4, 2024, Pages 415-431]
Ahmadi, Mohammad Identifying and analyzing the factors affecting the loyalty of customers in the home furniture industry (case study: Rasht city) [Volume 14, Issue 1, 2023, Pages 17-30]
Aryaie Monfared, Mohammad Hadi The potential of using tomato stalk pulp as long fibers in reinforcement of wheat straw commercial cold soda pulp [Volume 14, Issue 4, 2024, Pages 433-444]
Ataeefard, Maryam Improvement of Physical and Mechanical Properties of Testliner Coated by Unmodified and Modified Lignins [Volume 14, Issue 1, 2023, Pages 1-15]
Azadfallah, Mohammad The effect of submicron cellulose binder on the properties of briquettes made from bagasse and rapeseed [Volume 14, Issue 3, 2023, Pages 243-251]
Azadfallah, Mohammad Investigating the effect of pH changes and molar ratio on the properties of melamine formaldehyde resin for impregnating decoration paper [Volume 14, Issue 4, 2024, Pages 363-376]
B
Bahmani, Mohsen Investigation of the Natural Durability of Beech Wood by Meyer-Veltrup Model [Volume 14, Issue 4, 2024, Pages 377-387]
Bahmani, Zahra Withdrawal resistance and lateral shear strength of the nail connector in cypress wood (Cupressus arizonica ) treated with ACC and ACQ with emphasis on the use in NLT [Volume 14, Issue 2, 2023, Pages 113-125]
Bayatkashkoli, Aَli Investigation of mechanical properties of glulam beams made with screws or glue and reinforced with steel plates [Volume 14, Issue 1, 2023, Pages 79-96]
Bazvand, Maryam Estimating the demand for recycled paper in Iran: based on the ARDL approach [Volume 14, Issue 3, 2023, Pages 285-298]
D
Dahmardeh Ghalehno, mohammad Reinforcement of I-Shaped Beams Constructed with Parallel Strand Lumber and Laminated Veneer Lumber Utilizing Glass Fiber Polymer [Volume 14, Issue 4, 2024, Pages 389-402]
Dahmardeh Ghalehno, Mohammad Investigation of the physical, mechanical and morphological properties of the foam obtained from polylactic acid and microcrystalline cellulose [Volume 14, Issue 4, 2024, Pages 403-413]
Dalvand, Mosayeb Investigation of shear strength of joints made of medium-density fiberboard and particleboard with screw connectors [Volume 14, Issue 4, 2024, Pages 329-338]
E
Ebrahimi, SeyedehSedigheh Comparison of the effect of ozonation on the lignin removal of sugarcane bagasse and its unbleached paper pulp. [Volume 14, Issue 3, 2023, Pages 313-325]
Ebrahimpour Kasmani, Jafar The Effect of spray coating and freezing of brown liner paper on its physical and mechanical properties [Volume 14, Issue 1, 2023, Pages 31-40]
Emadi Jafarpour, Hossein Effect of intraspecific competition on radial growth and tracheid biometry: A Study of dominant and suppressed trees in a Norway spruce plantation [Volume 14, Issue 2, 2023, Pages 169-181]
F
Faal, Azarang Utilization of the various recycled fibers composition in producing packaging paper [Volume 14, Issue 1, 2023, Pages 65-78]
Farrokhpayam, Saeed reza Investigation of the physical, mechanical and morphological properties of the foam obtained from polylactic acid and microcrystalline cellulose [Volume 14, Issue 4, 2024, Pages 403-413]
Fotovat, Farzam Production of Binderless Fuel Briquettes from Lignocellulosic Residues of Paulownia, Corn Stalks and Waste Paper Pulp at Low Pressures [Volume 14, Issue 3, 2023, Pages 227-242]
G
Ghafarzadeh, Omid Improvement of Physical and Mechanical Properties of Testliner Coated by Unmodified and Modified Lignins [Volume 14, Issue 1, 2023, Pages 1-15]
Ghasemian, Ali Production of Binderless Fuel Briquettes from Lignocellulosic Residues of Paulownia, Corn Stalks and Waste Paper Pulp at Low Pressures [Volume 14, Issue 3, 2023, Pages 227-242]
Ghasemian, Ali Effect of using Almond shell flour and OCC on the properties of the production briquette [Volume 14, Issue 4, 2024, Pages 415-431]
Ghofrani, Mohammad Investigating the effective factors in making Kitchen cabinets made of wooden panel products [Volume 14, Issue 2, 2023, Pages 183-197]
Gholami, Davood Investigating the thermal properties of bio -adhesive tanic acid and gallic acid with furfural [Volume 14, Issue 1, 2023, Pages 55-63]
Gholamiyan, Hadi Analysis of effective indicators and solutions on the competitiveness of Iran's multi-purpose furniture market [Volume 14, Issue 2, 2023, Pages 127-138]
Gholamiyan, Hadi The effect of heat treatment on the physical, chemical and anatomical characteristics of date palm wood [Volume 14, Issue 2, 2023, Pages 155-167]
Gholampoor, Behnam Effect of Mixing Zeolite Compounds in Manufacturing Process of Medium Density Fiberboard on Physical and Mechanical Properties [Volume 14, Issue 1, 2023, Pages 41-53]
Godskhah Daryaei, Mehrdad Investigation of the Natural Durability of Beech Wood by Meyer-Veltrup Model [Volume 14, Issue 4, 2024, Pages 377-387]
Gohari asl, sayed saleh Investigating the effective factors in making Kitchen cabinets made of wooden panel products [Volume 14, Issue 2, 2023, Pages 183-197]
H
Hamzeh, Yahya Investigation on the Potential of Using the Residual Fibers from Fractionation of Canola Stalk with Glycerol in Pulp Production [Volume 14, Issue 2, 2023, Pages 139-153]
Hamzeh, Yahya Comparison of the effect of ozonation on the lignin removal of sugarcane bagasse and its unbleached paper pulp. [Volume 14, Issue 3, 2023, Pages 313-325]
Hamzeh, Yahya Investigating the effect of pH changes and molar ratio on the properties of melamine formaldehyde resin for impregnating decoration paper [Volume 14, Issue 4, 2024, Pages 363-376]
Hedjazi, Sahab Improvement of Physical and Mechanical Properties of Testliner Coated by Unmodified and Modified Lignins [Volume 14, Issue 1, 2023, Pages 1-15]
Hedjazi, Sahab Investigation on the Potential of Using the Residual Fibers from Fractionation of Canola Stalk with Glycerol in Pulp Production [Volume 14, Issue 2, 2023, Pages 139-153]
Hedjazi, Sahab The potential of using tomato stalk pulp as long fibers in reinforcement of wheat straw commercial cold soda pulp [Volume 14, Issue 4, 2024, Pages 433-444]
Heidari Emamverdikhan, Heidar The potential of using tomato stalk pulp as long fibers in reinforcement of wheat straw commercial cold soda pulp [Volume 14, Issue 4, 2024, Pages 433-444]
Hosseini-Tabatabaei, Mahmoud-Reza Investigation of mechanical properties of glulam beams made with screws or glue and reinforced with steel plates [Volume 14, Issue 1, 2023, Pages 79-96]
Hosseini-Tabatabaei, Mahmoud-Reza The effect of heat treatment on the physical, chemical and anatomical characteristics of date palm wood [Volume 14, Issue 2, 2023, Pages 155-167]
Humar, Miha Investigation of the Natural Durability of Beech Wood by Meyer-Veltrup Model [Volume 14, Issue 4, 2024, Pages 377-387]
I
Izadi Firoozabad, mohsen Investigation of Soluble copper nanoparticles effects in Construction Five-layer boards [Volume 14, Issue 4, 2024, Pages 351-362]
Izadyar, Soheila Comparison of the effect of ozonation on the lignin removal of sugarcane bagasse and its unbleached paper pulp. [Volume 14, Issue 3, 2023, Pages 313-325]
J
Jafari, Bahareh Investigation on the Potential of Using the Residual Fibers from Fractionation of Canola Stalk with Glycerol in Pulp Production [Volume 14, Issue 2, 2023, Pages 139-153]
Jonoobi, Mehdi Technical evaluation of pure and combined glulam beams based on LSL made from date palm rachies [Volume 14, Issue 3, 2023, Pages 253-269]
K
Keyvan Behjo, farshad Identifying and analyzing the factors affecting the loyalty of customers in the home furniture industry (case study: Rasht city) [Volume 14, Issue 1, 2023, Pages 17-30]
Khademi Eslam, Habib Investigating the characteristics of wood-plastic composites made from bagasse [Volume 14, Issue 3, 2023, Pages 271-283]
Khakifirooz, Alireza Investigation on coating of paper with biodegradable polymers and Zinc Oxide nanoparticles on its mechanical and barrier properties [Volume 14, Issue 1, 2023, Pages 97-111]
Kord, Behzad Investigation on coating of paper with biodegradable polymers and Zinc Oxide nanoparticles on its mechanical and barrier properties [Volume 14, Issue 1, 2023, Pages 97-111]
M
Mashayekhi, Davood Investigation of mechanical properties of glulam beams made with screws or glue and reinforced with steel plates [Volume 14, Issue 1, 2023, Pages 79-96]
Mirazadi, Zahra Estimating the demand for recycled paper in Iran: based on the ARDL approach [Volume 14, Issue 3, 2023, Pages 285-298]
Moezzipour, Aida Utilization of the various recycled fibers composition in producing packaging paper [Volume 14, Issue 1, 2023, Pages 65-78]
Mohammadi, Nasibeh Production of Binderless Fuel Briquettes from Lignocellulosic Residues of Paulownia, Corn Stalks and Waste Paper Pulp at Low Pressures [Volume 14, Issue 3, 2023, Pages 227-242]
Mohseni, Reza Estimating the demand for recycled paper in Iran: based on the ARDL approach [Volume 14, Issue 3, 2023, Pages 285-298]
Moradi, Zahra Investigation of the Natural Durability of Beech Wood by Meyer-Veltrup Model [Volume 14, Issue 4, 2024, Pages 377-387]
Movahedi, Farnaz Investigation on coating of paper with biodegradable polymers and Zinc Oxide nanoparticles on its mechanical and barrier properties [Volume 14, Issue 1, 2023, Pages 97-111]
N
Nikoutadbir, Alireza Determining the price index of three products of fiberboard and paticleboard (wood-bagasse) between 2010-2019 [Volume 14, Issue 3, 2023, Pages 299-311]
Norouzzadeh, Mohamadreza Investigating the resistance and optical properties of papers coated with carboxymethyl cellulose and montmorillonite combination [Volume 14, Issue 2, 2023, Pages 215-226]
Nosrati, Babak Investigation of the physical, mechanical and morphological properties of the foam obtained from polylactic acid and microcrystalline cellulose [Volume 14, Issue 4, 2024, Pages 403-413]
O
Oladi, Reza Effect of Mixing Zeolite Compounds in Manufacturing Process of Medium Density Fiberboard on Physical and Mechanical Properties [Volume 14, Issue 1, 2023, Pages 41-53]
Oladi, Reza Effect of intraspecific competition on radial growth and tracheid biometry: A Study of dominant and suppressed trees in a Norway spruce plantation [Volume 14, Issue 2, 2023, Pages 169-181]
P
Podineh Zaboli, Mohammad Investigation of the physical, mechanical and morphological properties of the foam obtained from polylactic acid and microcrystalline cellulose [Volume 14, Issue 4, 2024, Pages 403-413]
Pourtahmasi, kambiz Effect of Mixing Zeolite Compounds in Manufacturing Process of Medium Density Fiberboard on Physical and Mechanical Properties [Volume 14, Issue 1, 2023, Pages 41-53]
Pourtahmasi, Kambiz Effect of intraspecific competition on radial growth and tracheid biometry: A Study of dominant and suppressed trees in a Norway spruce plantation [Volume 14, Issue 2, 2023, Pages 169-181]
R
Rafiee, Hamed Analysis of effective indicators and solutions on the competitiveness of Iran's multi-purpose furniture market [Volume 14, Issue 2, 2023, Pages 127-138]
Rahmanifard, Roohollah Choosing a technology acquisition method in the paper industry with a fuzzy decision-making approach [Volume 14, Issue 2, 2023, Pages 199-214]
Rangavar, Hossein Investigation of Soluble copper nanoparticles effects in Construction Five-layer boards [Volume 14, Issue 4, 2024, Pages 351-362]
Rashidi, Alimorad Investigation of the properties of modified lignin-derived porous carbon for Lead removal [Volume 14, Issue 3, 2023, Pages 327-338]
Roohani, Mehdi Investigation on coating of paper with biodegradable polymers and Zinc Oxide nanoparticles on its mechanical and barrier properties [Volume 14, Issue 1, 2023, Pages 97-111]
Roohani, Mehdi Comparison of the effect of ozonation on the lignin removal of sugarcane bagasse and its unbleached paper pulp. [Volume 14, Issue 3, 2023, Pages 313-325]
S
Samariha, Ahmad The Effect of spray coating and freezing of brown liner paper on its physical and mechanical properties [Volume 14, Issue 1, 2023, Pages 31-40]
Samariha, Ahmad Investigating the characteristics of wood-plastic composites made from bagasse [Volume 14, Issue 3, 2023, Pages 271-283]
Shamsian, Mohammad physical and mechanical properties of wood-plastic based on MDF sawdust with the addition of sawdust coal, sulfur and recycled rubber powder [Volume 14, Issue 4, 2024, Pages 339-349]
Shamsian, Mohammad Reinforcement of I-Shaped Beams Constructed with Parallel Strand Lumber and Laminated Veneer Lumber Utilizing Glass Fiber Polymer [Volume 14, Issue 4, 2024, Pages 389-402]
Sharifat, Marzieh Effect of intraspecific competition on radial growth and tracheid biometry: A Study of dominant and suppressed trees in a Norway spruce plantation [Volume 14, Issue 2, 2023, Pages 169-181]
Sharifi, Seyed Hassan Investigating the resistance and optical properties of papers coated with carboxymethyl cellulose and montmorillonite combination [Volume 14, Issue 2, 2023, Pages 215-226]
T
Taherzadeh, Mohammad Improvement of Physical and Mechanical Properties of Testliner Coated by Unmodified and Modified Lignins [Volume 14, Issue 1, 2023, Pages 1-15]
Tarmian, Asghar Withdrawal resistance and lateral shear strength of the nail connector in cypress wood (Cupressus arizonica ) treated with ACC and ACQ with emphasis on the use in NLT [Volume 14, Issue 2, 2023, Pages 113-125]
Z
Zarea Hosseinabadi, Hamid Technical evaluation of pure and combined glulam beams based on LSL made from date palm rachies [Volume 14, Issue 3, 2023, Pages 253-269]
