Abdolkhani, Ali The potential of replacing the starch with soda and formacell lignins in surface sizing and evaluation of physical and mechanical properties of produced liner papers [Volume 12, Issue 4, 2022, Pages 453-464]
Abdolkhani, Jaber Evaluation of properties of microcrystalline cellulose produced from bagasse fibers using hydrochloric acid [Volume 12, Issue 3, 2021, Pages 441-452]
Abdulkhani, Ali Synthesis and characterization of aminated Lignin-based Hydrogel [Volume 12, Issue 4, 2022, Pages 551-560]
Afra, Elyas Influence of Cationic Starch and Nano-Wood addition on improving the Old Corrugated Containers (OCC) pulp properties [Volume 12, Issue 4, 2022, Pages 481-493]
Akbarpour, Iman The effect of enzymatic pre-treatment with amylase and refining on the physical and dewatering properties of OCC pulp [Volume 12, Issue 4, 2022, Pages 507-519]
Alishiri, Mehdi Assessing the effect of air- gap in acoustic panels’ sound absorption made of
date palm fiber (Phoenix dactylifera) [Volume 12, Issue 4, 2022, Pages 575-586]
Arabi, Mohammad An artificial neural network model for predicting modulus of elasticity and modulus of rupture of particleboard comparison with a multiple linear regression model [Volume 12, Issue 2, 2021, Pages 283-297]
Arefi, Majid Investigation of the effect of nano-wollastonite on moisture resistance in sealer-killer and sealer-semi-polyester paints on Fagus orientalis, Abies and Populus spp Salicacea species [Volume 12, Issue 2, 2021, Pages 175-184]
Aryaie Monfared, Mohammad Hadi Influence of Cationic Starch and Nano-Wood addition on improving the Old Corrugated Containers (OCC) pulp properties [Volume 12, Issue 4, 2022, Pages 481-493]
Asadi, Ali Investigation of the effect of nano-silica deposition on cellulose fibers , the mechanical properties of autoclaved cement composites in industrial scale [Volume 12, Issue 3, 2021, Pages 419-428]
Ashouri, Javad The effect of nano-SiO2 particles and film thickness on physical properties of transparent wood coatings [Volume 12, Issue 1, 2021, Pages 1-15]
B
Behravavn, Saeed The effect of alkali treatment of wheat straw powder on particle board properties made from mixing wheat straw and industrial wood chips [Volume 12, Issue 1, 2021, Pages 57-71]
Behrooz, Rabi Evaluation of structural, physical and chemical properties of cellulose and nanocrystalline cellulose extracted from pruning palm trees wastes [Volume 12, Issue 1, 2021, Pages 95-107]
Dahmardeh Ghalehno, Mohammad Investigation of biodegradability behavior, thermal properties and morphology of poly caprolactone/ poly lactic acod/ crystal nanocellulose nanocomposites [Volume 12, Issue 3, 2021, Pages 363-374]
Dehghani-Firouzabadi, Mohammadreza Study of antibacterial activity and other properties of paper coated by selenium nanoparticles [Volume 12, Issue 1, 2021, Pages 29-44]
Djafari Petroudy, Seyed Rahman Effects of maleic anhydride and oxidizer on mechanical and contact angle of polypropylene and cellulose nanocrystals composites. [Volume 12, Issue 2, 2021, Pages 299-307]
E
Efhamisisi, Davood The possibility of using zeolite as a retarder of particleboard obtained from sugarcane pulp [Volume 12, Issue 3, 2021, Pages 309-321]
Etedali shehni, shokouh Production and evaluation of lightweight fiberboard using ethylene vinyl acetate foam [Volume 12, Issue 3, 2021, Pages 405-417]
F
Faezipour, mehdi Quantitative analysis of poplar plantations in four Iranian
Provinces (Case of the study: East Azerbaijan, Zanjan, Ardabil and Kermanshah) [Volume 12, Issue 3, 2021, Pages 375-389]
Faezipour, Mohammad Mehdi The investigation of surface properties of Populus nigra wood coated with silica nanoparticles [Volume 12, Issue 1, 2021, Pages 133-143]
Farahani, Mohammad Reza Investigation of the effect of nano-silica deposition on cellulose fibers , the mechanical properties of autoclaved cement composites in industrial scale [Volume 12, Issue 3, 2021, Pages 419-428]
G
Ghahri, Saman Use of Modified Soy Adhesive for Manufacturing Fiberboard from Wood and OCC Fiber [Volume 12, Issue 2, 2021, Pages 247-257]
Ghofrani, Mohammad The effect of nano-SiO2 particles and film thickness on physical properties of transparent wood coatings [Volume 12, Issue 1, 2021, Pages 1-15]
Gholamiyan, Hadi Identifying the effect of plasma treatment on the palm texture with application attitude in the furniture industry [Volume 12, Issue 1, 2021, Pages 109-120]
Gholamiyan, Hadi Evaluation of wood machining parameters and surface quality in cutting process by water jet without abrasive material [Volume 12, Issue 3, 2021, Pages 429-440]
Gholampoor, Behnam Identifying the effect of plasma treatment on the palm texture with application attitude in the furniture industry [Volume 12, Issue 1, 2021, Pages 109-120]
Gholizadeh Mehdikhan Mahalleh, amin Evaluation of wood machining parameters and surface quality in cutting process by water jet without abrasive material [Volume 12, Issue 3, 2021, Pages 429-440]
H
Hajializadeh, Farajolah Improvement of the bending moment capacity of mitered MDF frame under diagonal tension by using of the densified poplar dowel [Volume 12, Issue 4, 2022, Pages 561-573]
Hajihassani, Reza Use of Modified Soy Adhesive for Manufacturing Fiberboard from Wood and OCC Fiber [Volume 12, Issue 2, 2021, Pages 247-257]
Hajihassani, Reza Influence of poplar wood densification on surface characteristics and adhesion strength [Volume 12, Issue 4, 2022, Pages 537-550]
Hamzeh, Yahya Investigation the effect of Thiophanate-methyl on the ageing of Gall ink of the historical papers
[Volume 12, Issue 2, 2021, Pages 195-205]
Hamzeh, Yahya Determination effective criteria in optimizing energy consumption in Kaveh paper industry company using analytic Hierarchy process [Volume 12, Issue 3, 2021, Pages 391-403]
Hamzeh, Yahya The potential of replacing the starch with soda and formacell lignins in surface sizing and evaluation of physical and mechanical properties of produced liner papers [Volume 12, Issue 4, 2022, Pages 453-464]
Hasanjanzadeh, Hadi The potential of replacing the starch with soda and formacell lignins in surface sizing and evaluation of physical and mechanical properties of produced liner papers [Volume 12, Issue 4, 2022, Pages 453-464]
Hedjazi, Sahab The potential of replacing the starch with soda and formacell lignins in surface sizing and evaluation of physical and mechanical properties of produced liner papers [Volume 12, Issue 4, 2022, Pages 453-464]
Hedjazi, Sahab Synthesis and characterization of aminated Lignin-based Hydrogel [Volume 12, Issue 4, 2022, Pages 551-560]
Hejazi-Mehrizi, majid Evaluation of structural, physical and chemical properties of cellulose and nanocrystalline cellulose extracted from pruning palm trees wastes [Volume 12, Issue 1, 2021, Pages 95-107]
Hosseinzadeh, Jaber Evaluation of properties of microcrystalline cellulose produced from bagasse fibers using hydrochloric acid [Volume 12, Issue 3, 2021, Pages 441-452]
J
Jamalirad, Loya The effect of alkali treatment of wheat straw powder on particle board properties made from mixing wheat straw and industrial wood chips [Volume 12, Issue 1, 2021, Pages 57-71]
Jonoobi, Mehdi Effects of maleic anhydride and oxidizer on mechanical and contact angle of polypropylene and cellulose nanocrystals composites. [Volume 12, Issue 2, 2021, Pages 299-307]
K
Karimi, Laleh Influence of Cationic Starch and Nano-Wood addition on improving the Old Corrugated Containers (OCC) pulp properties [Volume 12, Issue 4, 2022, Pages 481-493]
Khademieslam, Habibollah The investigation of surface properties of Populus nigra wood coated with silica nanoparticles [Volume 12, Issue 1, 2021, Pages 133-143]
Khazaeian, Abolghasem Production and evaluation of lightweight fiberboard using ethylene vinyl acetate foam [Volume 12, Issue 3, 2021, Pages 405-417]
Khosravani, Amir Cellulose nanofibers made from waste printing and writing papers and its effect on the properties of recycled paper [Volume 12, Issue 2, 2021, Pages 185-194]
M
Moradian, Mohammad Hadi Improvement of natural durability of date palm against termites (Microcerotermes diversus) by black liquor of kraft impregnation [Volume 12, Issue 1, 2021, Pages 45-56]
Moradian, Mohammad Hadi Determination of sapwood area in Pinus nigra by electrical impedance tomography [Volume 12, Issue 1, 2021, Pages 73-82]
Mosavi, Najmeh Recovery of lignin from Kraft black liquor in the methods oxygen and carbon dioxide pretreatment from hardwood Kraft black liquor [Volume 12, Issue 2, 2021, Pages 235-246]
N
Najideh, Robab Cellulose nanofibers made from waste printing and writing papers and its effect on the properties of recycled paper [Volume 12, Issue 2, 2021, Pages 185-194]
Narimani, Reza Identifying the wood type and investigating the quality of imported wooden ice cream sticks [Volume 12, Issue 4, 2022, Pages 495-506]
Nosrati Sheshkal, Babak Investigation of biodegradability behavior, thermal properties and morphology of poly caprolactone/ poly lactic acod/ crystal nanocellulose nanocomposites [Volume 12, Issue 3, 2021, Pages 363-374]
O
Oladi, Reza Investigation of growth dynamics of Juniper Trees in two Protected and Grazing areas in Jeyshabad, Zanjan, Iran Using Dendrochronology Method [Volume 12, Issue 1, 2021, Pages 83-94]
Oladi, Reza Identifying the wood type and investigating the quality of imported wooden ice cream sticks [Volume 12, Issue 4, 2022, Pages 495-506]
P
Pirayesh, hamidreza Investigation of the effect of nano-wollastonite on moisture resistance in sealer-killer and sealer-semi-polyester paints on Fagus orientalis, Abies and Populus spp Salicacea species [Volume 12, Issue 2, 2021, Pages 175-184]
Poorbaba, Reza An artificial neural network model for predicting modulus of elasticity and modulus of rupture of particleboard comparison with a multiple linear regression model [Volume 12, Issue 2, 2021, Pages 283-297]
R
Rahmaninia, Mehdi Cellulose nanofibers made from waste printing and writing papers and its effect on the properties of recycled paper [Volume 12, Issue 2, 2021, Pages 185-194]
Ramezani, Soraya The possibility of using zeolite as a retarder of particleboard obtained from sugarcane pulp [Volume 12, Issue 3, 2021, Pages 309-321]
Resalati, Hosain effect of cellulase on drainage and strength properties of virgin and recycled pulps [Volume 12, Issue 2, 2021, Pages 207-215]
Resalati, Hossein The effect of enzymatic pre-treatment with amylase and refining on the physical and dewatering properties of OCC pulp [Volume 12, Issue 4, 2022, Pages 507-519]
Rezaei, Karamatollah Identifying the wood type and investigating the quality of imported wooden ice cream sticks [Volume 12, Issue 4, 2022, Pages 495-506]
Rezavni, Mohammad Hadi Identifying the effect of plasma treatment on the palm texture with application attitude in the furniture industry [Volume 12, Issue 1, 2021, Pages 109-120]
Rostampour-Haftkhani, Aَkbar Improvement of the bending moment capacity of mitered MDF frame under diagonal tension by using of the densified poplar dowel [Volume 12, Issue 4, 2022, Pages 561-573]
S
Salari, Najmeh Evaluation of structural, physical and chemical properties of cellulose and nanocrystalline cellulose extracted from pruning palm trees wastes [Volume 12, Issue 1, 2021, Pages 95-107]
Shakeri, Alireza Production and evaluation of lightweight fiberboard using ethylene vinyl acetate foam [Volume 12, Issue 3, 2021, Pages 405-417]
T
Taghiyari, Hamidreza Investigation of the effect of nano-wollastonite on moisture resistance in sealer-killer and sealer-semi-polyester paints on Fagus orientalis, Abies and Populus spp Salicacea species [Volume 12, Issue 2, 2021, Pages 175-184]
Talaeipoor, Mohammad The investigation of surface properties of Populus nigra wood coated with silica nanoparticles [Volume 12, Issue 1, 2021, Pages 133-143]
TALAEIPOUR, MOHAMMAD Assessing the effect of air- gap in acoustic panels’ sound absorption made of
date palm fiber (Phoenix dactylifera) [Volume 12, Issue 4, 2022, Pages 575-586]
Tarmian, Asghar Identifying the wood type and investigating the quality of imported wooden ice cream sticks [Volume 12, Issue 4, 2022, Pages 495-506]
V
Vazirian, Arad Investigation of growth dynamics of Juniper Trees in two Protected and Grazing areas in Jeyshabad, Zanjan, Iran Using Dendrochronology Method [Volume 12, Issue 1, 2021, Pages 83-94]
Y
Younesi-Kordkheili, Hamed The Use of Maleated Lignin based Polyacid as Catalyst in Urea-Lignin-Glyoxal Wood Adhesive [Volume 12, Issue 3, 2021, Pages 351-361]
Yousefi, Hossein Investigation of the effect of nano-silica deposition on cellulose fibers , the mechanical properties of autoclaved cement composites in industrial scale [Volume 12, Issue 3, 2021, Pages 419-428]
Z
Zarea Hosseinabadi, Hamid Comparative investigation of the effect of pretreatment type and densification conditions on physical and mechanical properties of paulownia and poplar woods [Volume 12, Issue 4, 2022, Pages 521-536]
