Abdolkhani, Ali Characterization and Removal of Resins from Mixed Tropical Hardwoods Kraft Pulp [Volume 1, Issue 1, 2011, Pages 44-56]
Asghari, Zhila Investigation of the Amount of Tannic Acid in Bark Oak (Quercus castanifolia) [Volume 1, Issue 1, 2011, Pages 27-35]
Azizi, Majid Determination of Effective Criteria for Location Selection of Kiln Wood Drying Plants by AHP Technique [Volume 1, Issue 2, 2011, Pages 55-67]
B
Bayat kashkuli, Ali Studying Imports of Wood, Paper and their Products in the World and Iran from 1998 to 2007 [Volume 1, Issue 2, 2011, Pages 37-54]
Behrooz, Rabi The Effect of Preheating Treatment and non-simultaneous Addition of Chemicals on the Efficiency of Hydrogen Peroxide Bleaching of Chemi-mechanical pulp(CMP) [Volume 1, Issue 2, 2011, Pages 27-36]
Behrooz, Rabi Effect of Lignin Mixing Method on Physical and Mechanical Properties of Wood Flour- Polypropylene Composites [Volume 1, Issue 2, 2011, Pages 103-113]
Behrooz ashkiki, Rabi Influence of Concentration of Compatibilizer on
Long- term Water Absorption and Thickness Swelling Behavior of Polypropylene, Wood Flour/Glass Fiber Hybrid Composites [Volume 1, Issue 1, 2011, Pages 67-78]
D
Darabi, Peivand The Effect of Methylation and Anti-Oxidant on Discoloration of Weathered Wood Plastic Composites [Volume 1, Issue 1, 2011, Pages 12-26]
E
Ebrahimi, Ghanbar Preparation of a Kiln Drying Schedule for Poplar (Populus nigra)
Lumber of 5 cm Thickness [Volume 1, Issue 2, 2011, Pages 13-25]
F
Faezipour, Mehdi Tracking and Simulation of Dry Shell Formation in a Wood Drying Process by X-ray Spectroscopy [Volume 1, Issue 2, 2011, Pages 1-11]
Fallah, Peyman Water Absorption and Thickness Swelling behavior of Medium Density Fiberboard Manufactured by Hydrothermally Treated Fibers [Volume 1, Issue 1, 2011, Pages 1-11]
G
Ghasemi, Somayeh The Effect of Preheating Treatment and non-simultaneous Addition of Chemicals on the Efficiency of Hydrogen Peroxide Bleaching of Chemi-mechanical pulp(CMP) [Volume 1, Issue 2, 2011, Pages 27-36]
Gholamian, Hadi The Potential Use of Nanozycosil and Sodium Montmorillonite (NaMMT) Nanoclay to Decrease Water Absorption in MDF [Volume 1, Issue 2, 2011, Pages 69-81]
Ghotbifar, Alireza Influence of Concentration of Compatibilizer on
Long- term Water Absorption and Thickness Swelling Behavior of Polypropylene, Wood Flour/Glass Fiber Hybrid Composites [Volume 1, Issue 1, 2011, Pages 67-78]
H
Hamzeh, Yahya Characterization and Removal of Resins from Mixed Tropical Hardwoods Kraft Pulp [Volume 1, Issue 1, 2011, Pages 44-56]
I
Ilbeygi, Firooz Water Absorption and Thickness Swelling behavior of Medium Density Fiberboard Manufactured by Hydrothermally Treated Fibers [Volume 1, Issue 1, 2011, Pages 1-11]
J
Jahanshahi, Shayesteh Investigation of the Amount of Tannic Acid in Bark Oak (Quercus castanifolia) [Volume 1, Issue 1, 2011, Pages 27-35]
Jalili, Mohamad mehdi The Investigation of Acoustic Properties of Carbon Fiber-Polyester Composites and Comparing the Results with Poplar, Walnut and Beech Wood Specimens [Volume 1, Issue 2, 2011, Pages 83-101]
K
Kazemi najafi, Saeid Influence of Concentration of Compatibilizer on
Long- term Water Absorption and Thickness Swelling Behavior of Polypropylene, Wood Flour/Glass Fiber Hybrid Composites [Volume 1, Issue 1, 2011, Pages 67-78]
Kazemi najafi, Saeid Effect of Lignin Mixing Method on Physical and Mechanical Properties of Wood Flour- Polypropylene Composites [Volume 1, Issue 2, 2011, Pages 103-113]
L
Layeghi, Mohammad Design, Construction, and Performance Analysis of a Wood Thermal Conductivity Measurement Device using Flat Plate Heat Pipes [Volume 1, Issue 2, 2011, Pages 115-123]
Lotfi, Saber Design, Construction, and Performance Analysis of a Wood Thermal Conductivity Measurement Device using Flat Plate Heat Pipes [Volume 1, Issue 2, 2011, Pages 115-123]
M
Mansouryar, Iraj Dimensional Stability of Poplar Wood by Paraffin Emulsion, Quaternary Ammonium and Hydrated Starch using Full-cell Treatment [Volume 1, Issue 1, 2011, Pages 79-88]
Mansouryar, Iraj Preparation of a Kiln Drying Schedule for Poplar (Populus nigra)
Lumber of 5 cm Thickness [Volume 1, Issue 2, 2011, Pages 13-25]
Mohebbi, Behbood Water Absorption and Thickness Swelling behavior of Medium Density Fiberboard Manufactured by Hydrothermally Treated Fibers [Volume 1, Issue 1, 2011, Pages 1-11]
Mohebbi, Behbood Enhanced Mechanical Properties of Poplar Wood by a Combined-Hydro-Thermo-Mechanical (CHTM) Modification [Volume 1, Issue 1, 2011, Pages 57-66]
Mohebbi, Rahim Determination of Effective Criteria for Location Selection of Kiln Wood Drying Plants by AHP Technique [Volume 1, Issue 2, 2011, Pages 55-67]
Moien, Rasouli Design, Construction, and Performance Analysis of a Wood Thermal Conductivity Measurement Device using Flat Plate Heat Pipes [Volume 1, Issue 2, 2011, Pages 115-123]
Musavi, Yahya The Investigation of Acoustic Properties of Carbon Fiber-Polyester Composites and Comparing the Results with Poplar, Walnut and Beech Wood Specimens [Volume 1, Issue 2, 2011, Pages 83-101]
N
Najafi, Abdollah Effect of Immersion Temperature on Long-term Water Uptake Behavior of HDPE/Wood sawdust Composite [Volume 1, Issue 1, 2011, Pages 36-44]
P
Parsapazhoh, Davood Preparation of a Kiln Drying Schedule for Poplar (Populus nigra)
Lumber of 5 cm Thickness [Volume 1, Issue 2, 2011, Pages 13-25]
Pirayeshfar, Amir soheil The Investigation of Acoustic Properties of Carbon Fiber-Polyester Composites and Comparing the Results with Poplar, Walnut and Beech Wood Specimens [Volume 1, Issue 2, 2011, Pages 83-101]
R
Rahimi, Sohrab Preparation of a Kiln Drying Schedule for Poplar (Populus nigra)
Lumber of 5 cm Thickness [Volume 1, Issue 2, 2011, Pages 13-25]
Rahmati, Haydeh Characterization and Removal of Resins from Mixed Tropical Hardwoods Kraft Pulp [Volume 1, Issue 1, 2011, Pages 44-56]
Resalati, Hossein Investigation of the Amount of Tannic Acid in Bark Oak (Quercus castanifolia) [Volume 1, Issue 1, 2011, Pages 27-35]
S
Safi.s, Azam dokht Determination of Effective Criteria for Location Selection of Kiln Wood Drying Plants by AHP Technique [Volume 1, Issue 2, 2011, Pages 55-67]
Sharifnia, Houri Enhanced Mechanical Properties of Poplar Wood by a Combined-Hydro-Thermo-Mechanical (CHTM) Modification [Volume 1, Issue 1, 2011, Pages 57-66]
T
Tabarsa, Taghi Investigation of the Amount of Tannic Acid in Bark Oak (Quercus castanifolia) [Volume 1, Issue 1, 2011, Pages 27-35]
Taremian, Asghar Tracking and Simulation of Dry Shell Formation in a Wood Drying Process by X-ray Spectroscopy [Volume 1, Issue 2, 2011, Pages 1-11]
Tarmian, Asghar Preparation of a Kiln Drying Schedule for Poplar (Populus nigra)
Lumber of 5 cm Thickness [Volume 1, Issue 2, 2011, Pages 13-25]
Tarmian, Asghar Determination of Effective Criteria for Location Selection of Kiln Wood Drying Plants by AHP Technique [Volume 1, Issue 2, 2011, Pages 55-67]
Y
Younesi, Hamed Effect of Lignin Mixing Method on Physical and Mechanical Properties of Wood Flour- Polypropylene Composites [Volume 1, Issue 2, 2011, Pages 103-113]
Z
Zahed, Reza The Potential Use of Nanozycosil and Sodium Montmorillonite (NaMMT) Nanoclay to Decrease Water Absorption in MDF [Volume 1, Issue 2, 2011, Pages 69-81]