Abdolkhani, Ali Effect of Diluted Acid Pre-Extraction on Soda Pulping of Bagasse [Volume 5, Issue 1, 2014, Pages 119-128]
Abyaz, Ali Effect of Diluted Acid Pre-Extraction on Soda Pulping of Bagasse [Volume 5, Issue 1, 2014, Pages 119-128]
Afra, Elyas Investigation of the Effect of Endoglucanase Treatment on Beatability
and Drainage Rate of OCC Pulps [Volume 5, Issue 1, 2014, Pages 129-138]
Afra, Elyas Effect of chitosan-nanosilica self-assembly layers chitosan- on
cotton linter fibers and the paper properties [Volume 5, Issue 2, 2014, Pages 81-92]
Ahmadi, Hosein Study of linseed oil on white poplar wood (Populus alba L.) as a traditional treatment for historical wooden relics against weathering [Volume 5, Issue 2, 2014, Pages 93-106]
Akbarpour, Iman Investigation of the Effect of Endoglucanase Treatment on Beatability
and Drainage Rate of OCC Pulps [Volume 5, Issue 1, 2014, Pages 129-138]
Alizadeh, Hasan Determining the effective indices on export development of Iran’s office furniture thereby analytical hierarchy process (AHP) [Volume 5, Issue 2, 2014, Pages 107-118]
Azarhazin, Ali Effect of tin oxide nano particles and heat treatment on decay resistance and physical properties of beech wood (Fagus orientalis) [Volume 5, Issue 2, 2014, Pages 71-80]
Azizi, Majid Determining the effective indices on export development of Iran’s office furniture thereby analytical hierarchy process (AHP) [Volume 5, Issue 2, 2014, Pages 107-118]
B
Bavanaghi, Fatemeh Effect of tin oxide nano particles and heat treatment on decay resistance and physical properties of beech wood (Fagus orientalis) [Volume 5, Issue 2, 2014, Pages 71-80]
D
Daii, Sahar Investigating on Effect of Particle Form and Mixing Method on
applied Properties Green Composite [Volume 5, Issue 1, 2014, Pages 63-74]
Dalvand, Mosayeb Investigating the Stress Carrying Capacity of Corner Joints In The
Furniture Frame Fabricated With Dowel [Volume 5, Issue 1, 2014, Pages 21-32]
Dalvand, Mosayeb Investigation the bending moment resistance of joints fabricated
with dowel in the case-type furniture [Volume 5, Issue 2, 2014, Pages 37-46]
Daneshvar, Soheila Evaluation of Modulus of Elasticity in Standing Trees and Sawn Wood in Populous deltoids using Nondestructive Stress Wave Testing [Volume 5, Issue 1, 2014, Pages 11-20]
Dastoorian, Foroogh Evaluation of elevated temperature influence on mechanical properties of a commercial unrefined bagasse fiber-polypropylene composite [Volume 5, Issue 2, 2014, Pages 119-130]
Dehghani, M.reza The Comparison of Kraft Pulp Properties from Stem and
Branchwood of Hornbeam [Volume 5, Issue 1, 2014, Pages 139-152]
E
Ebrahimi, Ghanbar Investigating the Stress Carrying Capacity of Corner Joints In The
Furniture Frame Fabricated With Dowel [Volume 5, Issue 1, 2014, Pages 21-32]
Ebrahimi, Ghanbar Prediction of bending moment resistance of screw connected joints in plywood members using regression models and compare with that commercial medium density fiberboard (MDF) and particleboard [Volume 5, Issue 2, 2014, Pages 27-36]
Ebrahimi, Ghanbar Investigation the bending moment resistance of joints fabricated
with dowel in the case-type furniture [Volume 5, Issue 2, 2014, Pages 37-46]
Ebrahimi, Ghanbar Evaluation of elevated temperature influence on mechanical properties of a commercial unrefined bagasse fiber-polypropylene composite [Volume 5, Issue 2, 2014, Pages 119-130]
Ebrahimi, Ghanbar Determination of bending moment resistance of t-type joints constructed with wood biscuit [Volume 5, Issue 2, 2014, Pages 47-58]
Ebrahimi, Mastoureh Study on the Effect of Combined Nanosilver- Hygrothermal
Treatments on Wood Properties [Volume 5, Issue 1, 2014, Pages 93-106]
Ekrami, M.Amin Effect of nanoclay particles content on the mechanical properties of wood
flour-polypropylene composites using dynamic mechanic thermal analysis [Volume 5, Issue 2, 2014, Pages 15-26]
F
Faezipour, Mehdi Prediction of bending moment resistance of screw connected joints in plywood members using regression models and compare with that commercial medium density fiberboard (MDF) and particleboard [Volume 5, Issue 2, 2014, Pages 27-36]
Faezipour, M.Mahdi Determining the effective indices on export development of Iran’s office furniture thereby analytical hierarchy process (AHP) [Volume 5, Issue 2, 2014, Pages 107-118]
G
Ghafari, Mansour Effect of Faces Type and Thickness on Mechanical Properties
of Sandwich Panels [Volume 5, Issue 1, 2014, Pages 85-92]
Ghofrani, Mohammad Investigation on the Scratch Strength of Clear Paints Used in Furniture Industries on the Wood Species Beech, Elm, Alder and Spruce [Volume 5, Issue 1, 2014, Pages 33-44]
Ghorbani, Maryam Effect of tin oxide nano particles and heat treatment on decay resistance and physical properties of beech wood (Fagus orientalis) [Volume 5, Issue 2, 2014, Pages 71-80]
H
Hamzeh, Yahya Effect of Diluted Acid Pre-Extraction on Soda Pulping of Bagasse [Volume 5, Issue 1, 2014, Pages 119-128]
Hejazi, Sahhab Effect of Diluted Acid Pre-Extraction on Soda Pulping of Bagasse [Volume 5, Issue 1, 2014, Pages 119-128]
Hezbi, Nazbakht Investigation of the Effect of Endoglucanase Treatment on Beatability
and Drainage Rate of OCC Pulps [Volume 5, Issue 1, 2014, Pages 129-138]
I
Imani, Reza Effect of chitosan-nanosilica self-assembly layers chitosan- on
cotton linter fibers and the paper properties [Volume 5, Issue 2, 2014, Pages 81-92]
Izadyar, Soheila Effect of Diluted Acid Pre-Extraction on Soda Pulping of Bagasse [Volume 5, Issue 1, 2014, Pages 119-128]
J
Jabbari, Mohammad Effect of Faces Type and Thickness on Mechanical Properties
of Sandwich Panels [Volume 5, Issue 1, 2014, Pages 85-92]
K
Kahvand, Mohammad Determination of bending moment resistance of t-type joints constructed with wood biscuit [Volume 5, Issue 2, 2014, Pages 47-58]
Keshtegar, Ali Effect of Nano bentonite on Fire Retardant Properties of
Medium density fiberboard (MDF) [Volume 5, Issue 1, 2014, Pages 55-62]
Khazaian, Abolghasem Methods of retention increasing urea formaldehyde resin in order to produce wood-polymer from Paulownia [Volume 5, Issue 1, 2014, Pages 107-117]
Khazaian, Abolghasem The effect of chemical treatment and compression percent on mechanical properties of Paulownia compressed wood [Volume 5, Issue 2, 2014, Pages 59-70]
Kh.khosro, Saeid Investigating the Effective Index on Customers Choice in Buying Furniture [Volume 5, Issue 1, 2014, Pages 153-164]
Khojaste, Saeid Investigation of the type and content of gypsum on the dimensional stability and mechanical properties of gypsum particleboard [Volume 5, Issue 1, 2014, Pages 45-54]
Kool, Farhad Effect of Nano bentonite on Fire Retardant Properties of
Medium density fiberboard (MDF) [Volume 5, Issue 1, 2014, Pages 55-62]
Kord, Behzad Effect of Weathering Time on the Physical - Mechanical Properties and Color Change in Wood Flour/HDPE Composite [Volume 5, Issue 1, 2014, Pages 75-83]
Kord, Behzad Biodegradation behaviors of cellulose nanocrystals -PVA nanocomposites [Volume 5, Issue 2, 2014, Pages 1-13]
Kord, Behzad Effect of nanoclay particles content on the mechanical properties of wood
flour-polypropylene composites using dynamic mechanic thermal analysis [Volume 5, Issue 2, 2014, Pages 15-26]
L
Layeghi, Mohamad Investigation the bending moment resistance of joints fabricated
with dowel in the case-type furniture [Volume 5, Issue 2, 2014, Pages 37-46]
Layeghi, Mohammad Prediction of bending moment resistance of screw connected joints in plywood members using regression models and compare with that commercial medium density fiberboard (MDF) and particleboard [Volume 5, Issue 2, 2014, Pages 27-36]
Layeghi, Mohammad Evaluation of elevated temperature influence on mechanical properties of a commercial unrefined bagasse fiber-polypropylene composite [Volume 5, Issue 2, 2014, Pages 119-130]
Liimatainen, Henriki Effect of chitosan-nanosilica self-assembly layers chitosan- on
cotton linter fibers and the paper properties [Volume 5, Issue 2, 2014, Pages 81-92]
M
M.Achachlooi, Mohsen Study of linseed oil on white poplar wood (Populus alba L.) as a traditional treatment for historical wooden relics against weathering [Volume 5, Issue 2, 2014, Pages 93-106]
Madhoushi, Mehrab Evaluation of Modulus of Elasticity in Standing Trees and Sawn Wood in Populous deltoids using Nondestructive Stress Wave Testing [Volume 5, Issue 1, 2014, Pages 11-20]
Maleki, Sadegh Investigating the Stress Carrying Capacity of Corner Joints In The
Furniture Frame Fabricated With Dowel [Volume 5, Issue 1, 2014, Pages 21-32]
Maleki, Sadegh Prediction of bending moment resistance of screw connected joints in plywood members using regression models and compare with that commercial medium density fiberboard (MDF) and particleboard [Volume 5, Issue 2, 2014, Pages 27-36]
Manavi, Gholamhossein Investigation on the Scratch Strength of Clear Paints Used in Furniture Industries on the Wood Species Beech, Elm, Alder and Spruce [Volume 5, Issue 1, 2014, Pages 33-44]
Mehmandoost, Mahboobeh The effect of chemical treatment and compression percent on mechanical properties of Paulownia compressed wood [Volume 5, Issue 2, 2014, Pages 59-70]
Mehmandust, Mahboubeh Methods of retention increasing urea formaldehyde resin in order to produce wood-polymer from Paulownia [Volume 5, Issue 1, 2014, Pages 107-117]
Mirshokrai, Ahmad Investigation on the Scratch Strength of Clear Paints Used in Furniture Industries on the Wood Species Beech, Elm, Alder and Spruce [Volume 5, Issue 1, 2014, Pages 33-44]
M.Tavakoli, Sabrineh Effect of chitosan-nanosilica self-assembly layers chitosan- on
cotton linter fibers and the paper properties [Volume 5, Issue 2, 2014, Pages 81-92]
O
Omrani, Pantea Determination of bending moment resistance of t-type joints constructed with wood biscuit [Volume 5, Issue 2, 2014, Pages 47-58]
P
Payan, M.Hassan Investigation of the type and content of gypsum on the dimensional stability and mechanical properties of gypsum particleboard [Volume 5, Issue 1, 2014, Pages 45-54]
Pourtahmasi, Kambiz Study of linseed oil on white poplar wood (Populus alba L.) as a traditional treatment for historical wooden relics against weathering [Volume 5, Issue 2, 2014, Pages 93-106]
Pouryazdian, Ebrahim The Comparison of Kraft Pulp Properties from Stem and
Branchwood of Hornbeam [Volume 5, Issue 1, 2014, Pages 139-152]
R
Rangavar, Hossein Investigation of the type and content of gypsum on the dimensional stability and mechanical properties of gypsum particleboard [Volume 5, Issue 1, 2014, Pages 45-54]
Rangavar, Hossein Investigating the Effective Index on Customers Choice in Buying Furniture [Volume 5, Issue 1, 2014, Pages 153-164]
Rassam, Ghonche Effect of Nano bentonite on Fire Retardant Properties of
Medium density fiberboard (MDF) [Volume 5, Issue 1, 2014, Pages 55-62]
Rassam, Ghonche Study on the Effect of Combined Nanosilver- Hygrothermal
Treatments on Wood Properties [Volume 5, Issue 1, 2014, Pages 93-106]
Resalati, Hosein Effect of chitosan-nanosilica self-assembly layers chitosan- on
cotton linter fibers and the paper properties [Volume 5, Issue 2, 2014, Pages 81-92]
Resalati, Hossein Investigation of the Effect of Endoglucanase Treatment on Beatability
and Drainage Rate of OCC Pulps [Volume 5, Issue 1, 2014, Pages 129-138]
Rohani, Mahdi Effect of nanoclay particles content on the mechanical properties of wood
flour-polypropylene composites using dynamic mechanic thermal analysis [Volume 5, Issue 2, 2014, Pages 15-26]
Rostampour, Akbar Investigating the Stress Carrying Capacity of Corner Joints In The
Furniture Frame Fabricated With Dowel [Volume 5, Issue 1, 2014, Pages 21-32]
S
Salehpour, Shuboo Effect of Drying Method on the Permeability Coefficient of
Oak Wood (Quercus infactoria) [Volume 5, Issue 1, 2014, Pages 1-9]
Serayian, Ahmad The Comparison of Kraft Pulp Properties from Stem and
Branchwood of Hornbeam [Volume 5, Issue 1, 2014, Pages 139-152]
Shakeri, Alireza Investigating on Effect of Particle Form and Mixing Method on
applied Properties Green Composite [Volume 5, Issue 1, 2014, Pages 63-74]
Tabarsa, Taghi Investigating on Effect of Particle Form and Mixing Method on
applied Properties Green Composite [Volume 5, Issue 1, 2014, Pages 63-74]
Taghiyari, H.reza Study on the Effect of Combined Nanosilver- Hygrothermal
Treatments on Wood Properties [Volume 5, Issue 1, 2014, Pages 93-106]
Taghiyari, H.Reza Effect of Nano bentonite on Fire Retardant Properties of
Medium density fiberboard (MDF) [Volume 5, Issue 1, 2014, Pages 55-62]
Tajvidi, Mahdi Investigation the bending moment resistance of joints fabricated
with dowel in the case-type furniture [Volume 5, Issue 2, 2014, Pages 37-46]
Tajvidi, Mahdi Evaluation of elevated temperature influence on mechanical properties of a commercial unrefined bagasse fiber-polypropylene composite [Volume 5, Issue 2, 2014, Pages 119-130]
Taremian, Asghar Effect of Drying Method on the Permeability Coefficient of
Oak Wood (Quercus infactoria) [Volume 5, Issue 1, 2014, Pages 1-9]
Tatari, A.Asghar Effect of Faces Type and Thickness on Mechanical Properties
of Sandwich Panels [Volume 5, Issue 1, 2014, Pages 85-92]
Tazakor rezai, Vahid Effect of Weathering Time on the Physical - Mechanical Properties and Color Change in Wood Flour/HDPE Composite [Volume 5, Issue 1, 2014, Pages 75-83]
Y
Yazdanparast, Kusha Effect of Weathering Time on the Physical - Mechanical Properties and Color Change in Wood Flour/HDPE Composite [Volume 5, Issue 1, 2014, Pages 75-83]
Z
Zabihzadeh, Majid Evaluation of elevated temperature influence on mechanical properties of a commercial unrefined bagasse fiber-polypropylene composite [Volume 5, Issue 2, 2014, Pages 119-130]
Ziae, Mohsen Determining the effective indices on export development of Iran’s office furniture thereby analytical hierarchy process (AHP) [Volume 5, Issue 2, 2014, Pages 107-118]
