@article { author = {Yousefi, Hossein and Mashkour, Mahdi and Khazaeeian, Abolghasem and Tabarsa, Taghi}, title = {Effect of dissolution time and recycled solvent on the nanowelding process of cellulose nanofiber}, journal = {Iranian Journal of Wood and Paper Industries}, volume = {11}, number = {3}, pages = {395-405}, year = {2020}, publisher = {Iranian Scientific Association of Wood and Paper Industries}, issn = {2008-9066}, eissn = {2423-3242}, doi = {}, abstract = {In this study, all-cellulose nanocomposite was prepared through partial dissolution-nanowelding of cellulose nanofibers (prepared from Nano Novin Polymer Co.) using ionic liquid and the effect of dissolution time and recycled solvent on nanowelding process and nanocomposite properties was investigated. Also, six times of 5, 10, 20, 30, 60 and 120 min were used as dissolution times to partially dissolve cellulose nanofibers. Results showed that with increasing dissolution time, crystallinity increased and crystallite size decreased. FE-SEM micrographs confirmed that increasing dissolution time led to decrease in nanofiber diameter and increase of welding area. With the increase of dissolution time, tensile strength and Young’s modulus increased. But, these mechanical properties dropped over dissolution time longer than 30 min. However, the longer dissolution time, the higher strain at break. Since all-cellulose nanocomposite prepared with dissolution time of 30 min showed highest mechanical properties, recycled solvent was also used just for 30 min as dissolution time to partially dissolve cellulose nanofibers. The results of this section showed that nanocomposite prepared with as-received solvent had similar properties with that of prepared by recycled solvent}, keywords = {Nanowelding,solvent recovering,Cellulose Nanofibers,all-cellulose nanocomposite}, title_fa = {اثر زمان انحلال و حلال بازیافت شده بر فرآیند نانوجوشکاری نانوفیبرسلولز}, abstract_fa = {در این مطالعه، نانو کامپوزیت تمام سلولزی از طریق انحلال جزئی-نانوجوشکاری نانو فیبرهای سلولزی (تهیه‌شده از شرکت نانو نوین پلیمر) با حلال یونی ساخته شد و اثر زمان انحلال نانو فیبرها و حلال بازیافتی بر فرآیند نانو جوشکاری و ویژگی‌های نانو کامپوزیت موردبررسی قرار گرفت. شش زمان 5، 10، 20، 30، 60 و 120 دقیقه برای انحلال جزئی نانو فیبرهای سلولزی به کار گرفته شد. نتایج نشان داد با افزایش زمان انحلال درجه کریستالی و ابعاد کریستال‌های سلولز کاهش و مقدار سلولز غیر کریستالی افزایش یافت. تصاویر میکروسکپی هم گویای کاهش قطر نانو فیبرها در اثر انحلال جزئی و افزایش مقدار ناحیه جوش (عمدتاً سلولز غیرکریستالی و در نقش فاز ماتریس) نانو کامپوزیت بود. با افزایش زمان انحلال تا 30 دقیقه، مقاومت و مدول یانگ و کرنش در نقطه شکست افزایش یافت منتهی بعد از زمان 30 دقیقه مقاومت و مدول روند کاهشی پیداکرده و کرنش همچنان روند صعودی خود را حفظ نمود. با عنایت به بهینه بودن ویژگی‌های نانو کامپوزیت ساخته‌شده در زمان 30 دقیقه، حلال بازیافتی نیز در همین زمان جهت انحلال جزئی نانو فیبرها مورداستفاده قرار گرفت. نتایج در این بخش حاکی از مشابهت همه ویژگی‌های فیزیکی و مکانیکی و مشابهت تصاویر میکروسکپی نانو کامپوزیت ساخته‌شده با حلال بازیافتی با ویژگی‌های نانو کامپوزیت ساخته‌شده با حلال تازه بود.}, keywords_fa = {نانوجوشکاری,بازیافت حلال,نانوفیبرسلولز,نانوکامپوزیت تمام‌سلولزی}, url = {https://www.ijwp.ir/article_38155.html}, eprint = {https://www.ijwp.ir/article_38155_8aa3c5b841e528fa6bec16e0c46e9c2b.pdf} }