@article { author = {OMRANI, PANTEA and Ebrahimi, Ghanbar and Kahvand, Mohammad}, title = {Investigating the stress carrying capacity of miter corner joints made with biscuit under diagonal tension and compression loading}, journal = {Iranian Journal of Wood and Paper Industries}, volume = {10}, number = {3}, pages = {323-336}, year = {2019}, publisher = {Iranian Scientific Association of Wood and Paper Industries}, issn = {2008-9066}, eissn = {2423-3242}, doi = {}, abstract = {This study was conducted to evaluate the stress carrying capacity of miter corner joints made with binder of biscuit under diagonal tension and compression loading. Corner joints with the Joint members from two species of beech (Fagus orientalis) and Fir (Abies alba), with 1 to 2 biscuits to size of 10 and 20 and with help adhesives of polyvinyl acetate (PVAc), polyurethane (PU) and urea formaldehyde (UF), they were made and tested. Since wooden pin joint is one of the most commonly included furniture joint, the test specimens were constructed using a pin and PVAc adhesive as a control for comparison with binder of biscuit. The results of analysis of variance showed that the independent effect of the species of Joint members, the size of biscuits, the number of binders and the type of adhesive in both compression and tensile loading is significant at 5% level. The results showed that the stress carrying capacity of the joints made with beech species is higher than that of fir species, and with increasing size and number of biscuits, the stress carrying capacity increases. The stress carrying capacity of the joints made with the polyurethane adhesive was also higher than those made joints with polyvinyl acetate and urea formaldehyde adhesives. The stress carrying capacity of the joints made under compression load was greater than the stress carrying capacity under the diagonal compression and tension load. The highest stress carrying capacity was observed in joints made with beech wood, two binders, biscuit size 20 and polyurethane glue, in both diagonal tension and compression loading.}, keywords = {Biscuit joints,Miter joint,Stress carrying capacity,wooden pin,glue}, title_fa = {بررسی ظرفیت تحمل تنش اتصال گوشه‌ای فارسی ساخته‌شده با بیسکویت تحت بارگذاری فشاری و کششی قطری}, abstract_fa = {این پژوهش با هدف بررسی ظرفیت تحمل تنش اتصال گوشه‌ای فارسی ساخته‌شده با اتصال‌دهنده‌ی بیسکویت زیر بار فشاری و کششی قطری انجام شده است. اتصالات گوشه‌ای با اعضای اتصال از دو گونه‌ی راش (Fagus orientalis) و نراد (Abies alba)، با 1 تا 2 بیسکویت به اندازه 10 و 20 و با کمک چسب‌های پلی‌وینیل استات (PVAc)، پلی‌اورتان (PU) و اوره فرمالدئید (UF)، ساخته‌شده و تحت آزمون قرار گرفتند. از آنجا که اتصال پین چوبی جزء متداول‌ترین اتصالات مبلمان محسوب می‌شود، آزمونه‌های شاهدی نیز با کمک پین و چسب PVAc به عنوان شاهد جهت مقایسه با اتصال‌دهنده بیسکویتی ساخته شد. نتایج تجزیه واریانس نشان داد که اثر مستقل گونه‌ی اعضای اتصال، اندازه بیسکویت، تعداد اتصال‌دهنده و نوع چسب در هر دو حالت بارگذاری فشاری و کششی در سطح 5 درصد معنی‌دار است. نتایج نشان دادند که ظرفیت تحمل تنش اتصال‌های ساخته‌شده با گونه‌ی راش نسبت به گونه‌ی نراد بیشتر بوده و با افزایش اندازه و تعداد بیسکویت، ظرفیت تحمل تنش افزایش یافت. ظرفیت تحمل تنش اتصال‌های ساخته‌شده با چسب پلی‌اورتان نیز نسبت به اتصال‌های ساخته‌شده با چسب پلی‌وینیل استات و اوره فرمالدئید بیشتر بود. ظرفیت تحمل تنش اتصال‌های ساخته‌شده زیر بار فشاری بیشتر از ظرفیت تحمل تنش زیر بار کششی بود. بیشترین میزان ظرفیت تحمل تنش در اتصال‌های ساخته‌شده با گونه چوبی راش، دو اتصال‌دهنده، بیسکویت اندازه‌ی 20 و چسب پلی‌اورتان، در هر دو حالت بارگذاری فشاری و کششی مشاهده شد.}, keywords_fa = {اتصال بیسکویت,اتصال فارسی,ظرفیت تحمل تنش,پین چوبی,چسب}, url = {https://www.ijwp.ir/article_34939.html}, eprint = {https://www.ijwp.ir/article_34939_f85b04f034eb4d07daa85d5b602ad90d.pdf} }