@article { author = {sharari, mearaj and Rostampour-Haftkhani, Aَkbar and Ahmadi, mohammad and moezzipour, bita and Hajializadeh, Farajolah}, title = {Strengthening of the cross-laminated timber using glass fiber-reinforced polymer on the lateral performance of the single shear lap joints}, journal = {Iranian Journal of Wood and Paper Industries}, volume = {13}, number = {1}, pages = {1-14}, year = {2022}, publisher = {Iranian Scientific Association of Wood and Paper Industries}, issn = {2008-9066}, eissn = {2423-3242}, doi = {}, abstract = {In this study, the strengthening of cross-laminated timber (CLT) with glass fiber reinforced polymer (GFRP) on the lateral resistance (LR) of the single shear lap joints was investigated. Poplar (Populus alba) layers were used to construct the three-layer CLT. In first step, the effect of GFRP strengthening of CLT panel with three layers of FRP fastened with a lag screw, concrete screw, wood screw, and steel nail at an end distance of 1 cm on the lateral load capacity was investigated. In second step, the effect of the number of GFRP layers on the LR of the joint assembled with the lag screw with an end distance of 1 cm was investigated. Finally, the main effects of panel strength directions (major and minor axes), fastener types (lag screw, concrete screw, wood screw, and steel nail), and end distances (1and 2 cm) and their interaction on LR were investigated. The results showed that LR was increased by 22 to 53% with reinforcement, which was more considerable in joints with smaller diameter fasteners. By increasing the number of GFRP layers from one to three layers, LR was increased by 27%. By increasing the end distance, changing the fastener types and panel directions, LR was changed 114.7%, 219.6%, and 7%, respectively. The interaction of variables on LR showed that by simultaneously changing the fastener types × end distance, LR changed about 447%, which implied the importance of choosing the proper fastener with sufficient end distance to construct the joints with a metal connector such as brackets.}, keywords = {Cross-laminated timber,Glass Fiber Reinforced Polymer,nail and screw connections,single-shear lap joints}, title_fa = {تاثیر تقویت‌ چندسازه ساختمانی با لایه‌های چوبی متقاطع (CLT) با الیاف شیشه بر عملکرد برشی اتصال با یک صفحه برش}, abstract_fa = {در این مطالعه تاثیر تقویت چندسازه ساختمانی با لایه‌های چوبی متقاطع (CLT) با الیاف شیشه بر نیروی برشی اتصال با یک صفحه برش بررسی شد. برای ساخت CLT سه لایه، از لایه‌های چوب صنوبر (Populus alba) استفاده شد. در این تحقیق در مرحله اول، تاثیر تقویت CLT با سه لایه الیاف شیشه و تاثیر آن بر نیروی برشی اتصال ساخته شده با پیچ سرمهره، پیچ بتنی، پیچ چوب و میخ فولادی با فاصله تا انتهای یک سانتیمتر بررسی شد. در مرحله دوم، تاثیر تعداد لایه‌های الیاف شیشه بر نیروی برشی اتصال ساخته شده با پیچ سر مهره با فاصله تا انتهای یک سانتیمتر بررسی شد. در مرحله سوم، تاثیر مستقل و متقابل جهت پانل CLT (طولی و عرضی)، نوع اتصال دهنده (پیچ سرمهره، پیچ بتنی، پیچ چوب و میخ فولادی) و فاصله تا انتها (یک و سه سانتیمتر) بر نیروی برشی اتصال بررسی شد. نتایج نشان داد که با تقویت اتصال‌ها، نیروی برشی 22 تا 53% افزایش یافته است که این افزایش مقاومت در اتصال دهنده‌های با قطر کمتر محسوس‌تر بوده است. با افزایش تعداد لایه‌های الیاف شیشه از یک به سه لایه، نیروی برشی اتصال‌ها 27% افزایش یافت. با افزایش فاصله تا انتها ، تغییر نوع اتصال‌دهنده و جهت پانل CLT مقدار نیروی برشی اتصال به ترتیب 7/114%، 6/219% و 7% تغییر کرد. تاثیر متقابل متغیرها بر نیروی برشی نشان داد که با تغییر همزمان نوع اتصال دهنده×فاصله تا انتها مقدار نیروی برشی اتصال حدود 447% تغییر کرد، که بیانگر اهمیت چشمگیر انتخاب اتصال دهنده مناسب با فاصله تا انتهای کافی برای ساخت اتصالات با ورق‌های فلزی با یک صفحه برش مانند براکت‌ها است.}, keywords_fa = {چندسازه ساختمانی با لایه‌های چوبی متقاطع (CLT),الیاف شیشه,اتصال پیچ و میخ,اتصال با یک صفحه برش}, url = {https://www.ijwp.ir/article_253098.html}, eprint = {https://www.ijwp.ir/article_253098_86da909f24b9f5dc83fb77032dd634f1.pdf} }