@article { author = {oladi, Reza and gorgij, rahmatollah and emaminasab, mohammad and Nasiriani, saedeh}, title = {Wood anatomy and physical and chemical properties of fast growing Athel tamarisk (Tamarix aphylla L.)}, journal = {Iranian Journal of Wood and Paper Industries}, volume = {7}, number = {4}, pages = {511-522}, year = {2017}, publisher = {Iranian Scientific Association of Wood and Paper Industries}, issn = {2008-9066}, eissn = {2423-3242}, doi = {}, abstract = {Athel tamarisk (Tamarix aphylla) is a fast growing, evergreen tree succeeding in the most soils and can tolerate the saline conditions. Despite its ecological importance and wide distribution in central and southern parts of Iran, wood properties of this species has little been concerned. However, the potential of this species in cellulosic industries of Middle East dry countries has recently been focused. Hence, to study wood anatomy and physical and chemical properties of Athel tamarisk, 3 stands were selected and felled from the Zabol region (Sistan and Baluchestan province). Wood anatomical features of this species were studied and listed according to the list of microscopic features for hardwood identification by IAWA Committee. In addition, lignin distribution in xylem was studied using fluorescence microscopy. Calculating fiber biometry features assessed that although fiber quality is not perfect but meets the standards of paper production, comparing other commercially used hardwoods in this industry. According to chemical composition analysis, cellulose content of this wood is rather low (39%) which could be a result of large amount of thin-walled paranchyma cells in xylem. Lignin content is a bit higher than average hardwoods and this component is concentrated in vessels and fibers. Physical properties of studied wood samples (specific gravity and shrinkage values) were in the range of other light-weight and fast growing hardwoods and thus this wood is expected to have similar end-use quality.}, keywords = {Tamarisk,wood anatomy,fluorescence microscope,fibers,Lignin}, title_fa = {بررسی ویژگی‌های آناتومی، فیزیکی و شیمیایی چوب گونه تند رشد گز شاهی (Tamarix aphylla L.)}, abstract_fa = {گز شاهی (Tamarix aphylla) درختی تند رشد و همیشه‌سبز بوده که در بیشتر خاک‌ها رشد کرده و شرایط شوری را تحمل می‌کند. علیرغم اهمیت زیست-محیطی و پراکنش خوب آن در مناطق مرکزی و جنوبی ایران، ویژگی‌های چوب این گونه کمتر مورد توجه قرار گرفته است. با این حال، به تازگی استفاده از این گونه برای صنایع سلولزی در مناطق خشک کشورهای خاورمیانه مورد توجه قرار گرفته است. از این رو، به منظور تعیین ویژگی‌های آناتومی، فیزیکی و شیمیایی چوب گز شاهی، سه اصله درخت سالم واقع در منطقه زابل (استان سیستان و بلوچستان) به طور تصادفی انتخاب و قطع شدند. ویژگی‌های آناتومی چوب این گونه بطور دقیق و براساس فهرست ویژگی‌های میکروسکوپی برای شناسایی پهن‌برگان انجمن بین‌المللی آناتومیست‌های چوب جهان، تعیین شد. همچنین توزیع لیگنین در عناصر بافت چوبی با استفاده از میکروسکوپ فلوئورسنس مورد بررسی قرار گرفت. محاسبه ضرایب بیومتری الیاف نشان داد که گرچه الیاف این گونه، کیفیت عالی ندارند ولی درمقایسه با دیگر پهن‌برگان مورد استفاده در صنایع کاغذسازی، دارای استانداردهای لازم می‌باشند. در بررسی ویژگی‌های شیمیایی، مشخص شد که چوب گز، نسبتاً سلولز کمی دارد (39%) که این مساله ممکن است ناشی از وجود حجم زیادی از سلول‌های پارانشیمی دیواره نازک در بافت چوبی باشد. لیگنین این گونه در مقایسه با میانگین پهن‌برگان اندکی بیشتر بوده و تمرکز آن در آوندها و فیبرها است. ویژگی‌های فیزیکی چوبِ نمونه‌های مورد بررسی (جرم حجمی و ضرایب همکشیدگی) در دامنه دیگر گونه‌های پهن‌برگ سبک و تندرشد قرار گرفت و از این رو انتظار می‌رود کیفیتی مانند این چوب‌ها داشته باشد.}, keywords_fa = {گز,آناتومی چوب,میکروسکوپ فلوئورسنس,الیاف,لیگنین}, url = {https://www.ijwp.ir/article_19237.html}, eprint = {https://www.ijwp.ir/article_19237_0e46faf3b6373e416064880fea7261b1.pdf} }