@article { author = {ghorbani, maryam and kaki, rojin}, title = {Investigation on physical behavior of styrene wood-polymer in different concentrations of monomer}, journal = {Iranian Journal of Wood and Paper Industries}, volume = {7}, number = {2}, pages = {231-239}, year = {2016}, publisher = {Iranian Scientific Association of Wood and Paper Industries}, issn = {2008-9066}, eissn = {2423-3242}, doi = {}, abstract = {This research was conducted to study the effect of different concentrations of styrene lumen monomer on the physical properties of beech wood. Physical test samples were prepared according to ASTM-D1037 standard and treated with vacuum-pressure method at five concentration levels; 0, 40, 60, 80 and 100 percent of soluble monomer. For polymerization, treated samples were heated in oven for two 24-hour period at 90 and 103ºC respectively. Monomer and polymer absorption, density variation, water absorption, swelling and anti-swelling efficiency (ASE) were determined. According to the results, Monomer and polymer absorption were increment by monomer concentration increase, and they were reported 38.2% and 26% in highest level. With polymer absorption enhancement, density of wood increased from 0/63g/cm³ in control to 0/91g/cm³ in the highest monomer concentration level that reduces pores in wood-polymer structure. Absorbed polymer enhancement decreased hydrophilicity and dimensional changes of treated samples, so that water absorption and swelling volume of the samples saturated with 100% concentration of monomer were decreased 64% and 45.3% after the longest immersion time. Highest Anti-swelling efficiency of Styrene-saturated samples was determined 56.15% in the maximum concentration level of treatment.}, keywords = {Styrene,Wood–polymer composites,physical behavior,water absorption,anti-swelling efficiency}, title_fa = {بررسی رفتار فیزیکی چوب پلیمر استایرن در غلظت‌های مختلف مونومر}, abstract_fa = {در این پژوهش اثر غلظت‌های مختلف مونومر حفره‌ای استایرن بر خواص فیزیکی چوب راش ایرانی بررسی گردید. نمونه‌های آزمون فیزیکی بر اساس استاندارد ASTM-D1037 تهیه گردیدند و به روش خلا-فشار، در پنج سطح غلظت0، 40، 60، 80 و 100 درصد از مونومر اشباع شدند. پلیمریزاسیون مونومر تحت اعمال دما در آون در دو بازه زمانی 24 ساعته، به ترتیب در دمای 90 و 103 درجه سانتی‌گراد انجام‌شد. جذب مونومر و پلیمر، تغییرات دانسیته، جذب آب، واکشیدگی و اثر ضدواکشیدگی اندازه‌گیری شد. بر‌اساس نتایج با افزایش غلظت، جذب مونومر و پلیمر افزایش یافت و در بالاترین سطح، جذب مونومر و پلیمر به ترتیب 288/38 و 26 درصد گزارش گردید. با افزایش جذب پلیمر، دانسیته چوب از g/cm³ 0/36 در نمونه شاهد به g/cm0/91 در بالاترین سطح غلظت مونومر افزایش یافت که به کاهش فضای خالی در ساختار چوب‌پلیمر منجرشد. افزایش سطح جذب پلیمر، آب‌دوستی و تغییرات ابعاد نمونه‌های تیمار شده را کاهش داد، به طوری‌که پس از طولانی‌ترین زمان غوطه‌وری، جذب آب و واکشیدگی‌حجمی نمونه اشباع شده با مونومر به غلظت 100درصد، در مقایسه با نمونه شاهد، 64 و 3/45 درصد کاهش یافتند. بالاترین کارایی ضدواکشیدگی نمونه‌های اشباع شده با مونومر استایرن نیز، 157/56 درصد در بالاترین سطح غلظت گزارش گردید.}, keywords_fa = {استایرن,چوب پلیمر,رفتار فیزیکی,جذب آب,کارایی ضدواکشیدگی}, url = {https://www.ijwp.ir/article_15059.html}, eprint = {https://www.ijwp.ir/article_15059_3b637a35bb04745e8bb4467fbe97c110.pdf} }