@article { author = {golbabaei, fardad and Ebrahimi, Ghanbar}, title = {The mechanical properties of Acer velutinum var. glabrescens wood growing in different regions of Caspian forests}, journal = {Iranian Journal of Wood and Paper Industries}, volume = {7}, number = {1}, pages = {79-90}, year = {2016}, publisher = {Iranian Scientific Association of Wood and Paper Industries}, issn = {2008-9066}, eissn = {2423-3242}, doi = {}, abstract = {The major engineering properties of Acer velutinum var. glabrescens wood growing in different regions of Caspian forests (North of Iran) was determined. Test materials were selected randomly from Acer velutinum var. glabrescens tree plantation and the test specimens were prepared according to ASTM D-143 standard. Mechanical and physical properties were measured on both green and air-dried samples (12% moisture content). The results of the measurement were statistically analyzed based on randomized block design and factorial experiment. The influence of specimen locations at different stem heights was examined. Based on the results of this study, Significant areas of habitat in the area, Maple Vysr Mazandaran species most resistant of the Maple Sangdeh Frame has the lowest resistance. Keywords: Maple, statice bending, compression parallel to grain, compression perpendicular to grain, tension perpendicular to grain, Acer velutinum var. glabrescens.}, keywords = {statice bending,compression parallel to grain,compression perpendicular to grain,tension perpendicular to grain,Acer velutinum var. glabrescens}, title_fa = {خواص فیزیکی و مکانیکی چوب گونه افرا پلت (Acer velutinum var. glabrescens) در رویشگاههای شمال کشور}, abstract_fa = {بمنظور تعیین ویژگی‌های مهم خواص مکانیکی چوب گونه‌افرا(پلت) در جنگل‌های چهار منطقه رویشگاهی شمال کشور(منطقه شفارود گیلان، استان گلستان، سنگده و ویسر) براساس استاندارد ASTM آئین نامه D143-52 از این گونه 12 درخت انتخاب شد و پس از قطع و تبدیل و انجام آزمایشای مختلف، مقاومت‌های مجاز گونه فوق تعیین گردید. این داده‌ها در دو گروه خشک و سبز در رویشگاه‌های مختلف بوسیله تجزیه واریانس و طبقه‌بندی دانکن انجام گردید. نتایج این تحقیق نشان می‌دهند که خشک کردن چوب تا حد بسیار زیادی خواص مکانیکی آن را بهبود می‌بخشد. نتایج آزمایشات و تجزیه و تحلیل آماری نشان می دهد که خواص مکانیکی چوب افرا پلت تحت تاثیر ارتفاع رویشگاه دچار تغییرات بوده ولی این تغییرات در انواع آزمایشات یکسان نمی‌باشد و اثر جهات جغرافیایی در غالب مقاومت‌ها معنی‌دار نبوده و بیشترین مقاومت‌ها در ارتفاع پایین تنه درخت بوده و تغییرات آن تابع روند خاصی نمی‌باشد و غالباً در ناحیه وسط تنه درخت کاهش و سپس افزایش نشان داده است. در مقایسه مناطق رویشگاهی در کل ملاحظه گردیدکه گونه افرا پلت منطقه ویسر مازندران بیشترین مقاومت و افرا پلت منطقه سنگده فریم کمترین مقاومت را دارا است.}, keywords_fa = {افرا پلت,خمش استانیک,فشار موازی الیاف,فشار عمود بر الیاف,کشش عمود برالیاف}, url = {https://www.ijwp.ir/article_14255.html}, eprint = {https://www.ijwp.ir/article_14255_b340fa8e965dbffbfd2eba242c47f570.pdf} }