@article { author = {Dastoorian, Foroogh and Layeghi, Mohammad and Ebrahimi, Ghanbar and Tajvidi, Mahdi and Zabihzadeh, Majid}, title = {Evaluation of elevated temperature influence on mechanical properties of a commercial unrefined bagasse fiber-polypropylene composite}, journal = {Iranian Journal of Wood and Paper Industries}, volume = {5}, number = {2}, pages = {119-130}, year = {2014}, publisher = {Iranian Scientific Association of Wood and Paper Industries}, issn = {2008-9066}, eissn = {2423-3242}, doi = {}, abstract = {An experimental investigation was conducted to evaluate the effect of elevated temperatures, ranging from room temperature to 80oC, on mechanical characteristics of a commercial bagasse fiber/polypropylene composite. The test results were used to determine the temperature dependencies of the mechanical properties of the studied composite material at temperatures up to 80°C in order to develop temperature adjustment factors for the use in structural applications. The results have shown that as temperature increases, the material become more ductile due to increased plastic deformation gets lower stiffness and fails at higher strains. The resulted adjustment factors were different for each loading mode and the results also have indicated that the influence of elevated temperatures on values of modulus was higher than that on strengths.}, keywords = {Mechanical properties,bagasse fibers,elevated temperatures,temperature adjustment factors,Polypropylene}, title_fa = {مطالعه اثر افزایش دما بر مقاومت‌های مکانیکی چندسازه تجاری الیاف باگاس پلی‌پروپیلن}, abstract_fa = {در این مطالعه اثر افزایش دما بر مقاومت‌های مکانیکی چندسازه تجاری الیاف باگاس- پلی‌پروپیلن در محدوده دمای اتاق تا دمای 80 درجه سانتی‌گراد مورد ارزیابی و بررسی قرار گرفت. نتایج حاصل برای تعیین وابستگی دمایی خواص مکانیکی چندسازه موردمطالعه به‌منظور توسعه ضرایب تنظیم دما به کار گرفته شد. نتایج نشان داد که با افزایش دما خاصیت تغییرشکل‌پذیری چندسازه به دلیل افزایش تغییرشکل پلاستیکی، بیشتر شده، مدول الاستیسیته آن نیز کاهش می‌یابد و شکست در کرنش بالاتری رخ می‌دهد. ضرایب تنظیم حاصله برای مدهای بارگذاری مختلف متفاوت بود و همچنین اثر افزایش دما بر مدول الاستیسیته بیشتر از اثر افزایش دما بر مقاومت بوده است.}, keywords_fa = {خواص مکانیکی,الیاف باگاس,افزایش دما,ضرایب تنظیم دما,پلی‌پروپیلن}, url = {https://www.ijwp.ir/article_12043.html}, eprint = {https://www.ijwp.ir/article_12043_f193ec408f38dec1801fb7d686e8c960.pdf} }