@article { author = {Darikvand, Mohammad and Ebrahimi, Ghanbar and A. Eckelman, Carel}, title = {Effect of shoulder thickness on bending moment capacity of mortise and loose tenon joint}, journal = {Iranian Journal of Wood and Paper Industries}, volume = {4}, number = {1}, pages = {65-75}, year = {2012}, publisher = {Iranian Scientific Association of Wood and Paper Industries}, issn = {2008-9066}, eissn = {2423-3242}, doi = {}, abstract = {This study was carried out in order to determine the effect of shoulder thickness (including 1.5, 5, 10, 15 and 18.5 mm), loose tenon length (15, 20, 25, 30, and 35mm), width of loose tenon (20, 25, 30, 35, and 40mm), and loose tenon wood species (Beech, walnut, oak, sycamore, poplar, and fir) on bending moment capacity of mortise and loose tenon joint. Polyvinyl acetate (PVAc) adhesive was utilized in constructing joint specimens. Totally 100 T-type joints were made and tested in the same way. The results showed that the difference between the groups was highly significant in terms of shoulder thickness, loose tenon length, and width of loose tenon. Shoulder thickness directly affected bending moment capacity of joint. The highest bending moment capacity was obtained in joints with 1.5mm shoulder thickness. As loose tenon length and width were increased, the strength of the joint was correspondingly improved. Test joints with loose tenon made of beech wood gave higher bending moment capacity than joints with loose tenon constructed with other wood species.}, keywords = {Shoulder thickness,Mortise and loose tenon joint,Bending moment capacity,PVAc adhesive}, title_fa = {بررسی تأثیر ضخامت شانهی بالای کام بر ظرفیت لنگر خمشی اتصال کام و زبانه سیار}, abstract_fa = {در این تحقیق تأثیر ضخامت شانهی بالای کام در پنج اندازهی 5 35 و 40 میلیمتر بر ظرفیت ،30 ،25 ، 30 و 35 میلیمتر و ارتفاع زبانهی سیار نیز در پنج اندازهی 20 ،25 ،20 ، اندازههای 15 لنگر خمشی اتصال کام و زبانه سیار بررسی شدهاست. همچنین به منظور بررسی تأثیر گونهی چوب مورد استفاده برای ساخت زبانهی سیار بر ظرفیت لنگر خمشی اتصال از چوب گونههای راش، گردو، بلوط، چنار، صنوبر و نراد استفاده شدهاست. با در شکل با روشی یکسان و با استفاده از چسب پلیوینیل استات T نظر گرفتن 5 تکرار برای هر تیمار در مجموع 100 اتصال 18 میلیمتر / 1 تا 5 / ساخته شد و مورد آزمایش قرار گرفت. بنابر نتایج، با افزایش ضخامت شانهی بالای کام از 5 (PVAc) میانگین ظرفیت لنگر خمشی به طور پیوسته به میزان 50 درصد کاهش یافتهاست. با افزایش طول نفوذ زبانهی سیار از 15 تا 30 میلیمتر ظرفیت لنگر خمشی افزایش و از 30 تا 35 میلیمتربه دلیل افزایش همزمان ضخامت شانه ظرفیت لنگر خمشی اتصال کاهش یافتهاست. ارتفاع زبانهی سیار تاثیر ویژهای بر ظرفیت لنگر اتصال از خود نشان داد به گونهای که با افزایش ارتفاع زبانهی سیار ظرفیت لنگر اتصال به طور پیوسته افزایش پیدا کردهاست. تأثیر گونهی چوب مورد استفاده برای ساخت زبانهی سیار بر ظرفیت لنگر خمشی اتصال معنیدار بوده و زبانهی ساخته شده از چوب راش بیشترین ظرفیت لنگر خمشی را از خود نشان دادهاست.}, keywords_fa = {شانهی بالای کام,اتصال کام و زبانه سیار,ظرفیت لنگر خمشی,چسب پلی وینیل استات}, url = {https://www.ijwp.ir/article_11505.html}, eprint = {https://www.ijwp.ir/article_11505_a9bc0a7a7a38e2b4b59a2b7bd00c4c89.pdf} }