@article { author = {Dalvand, Mosayeb and Ebrahimi, Ghanbar and Tajvidi, Mahdi and Layeghi, Mohamad}, title = {Establishing mathematical model withdrawal resistance of wooden dowel in plywood}, journal = {Iranian Journal of Wood and Paper Industries}, volume = {4}, number = {1}, pages = {37-47}, year = {2012}, publisher = {Iranian Scientific Association of Wood and Paper Industries}, issn = {2008-9066}, eissn = {2423-3242}, doi = {}, abstract = {The goal of this study was to investigate withdrawal resistance of doweled joint with plywood members and establishing a predicting mathematical model for such joints in which regularly dowel is installed perpendicular to surface and also edge of plywood. Joint members were out of 11-ply hardwood plywood (Hornbeam, Beech and Alder) that were 19 mm in thickness. Dowels were fabricated out of Beech and Hornbeam species. Their diameters (6, 8 and 10 mm) and depths of penetration (9, 13 and 17 mm) in joint members were chosen variable in this experiment. Results have shown that withdrawal resistance of doweled joints made on face and edge of plywood members, increases with increase of dowel’s diameter and its penetration depth. Joints made with dowels of Hornbeam had higher than dowels of Beech ones. Highest withdrawal resistances (2951 N, 2441 N) were observed in joint on face and edge side of plywood members made with dowels of Hornbeam which were 10 mm in diameter and their depth of penetration was 17 mm. Lowest withdrawal resistance values (799 N, 784N) were of Beech wood dowels which were 6 mm in diameter and 9 mm penetrated into members.}, keywords = {Withdrawal resistance,Plywood,dowel,Diameter,penetration depth,Mathematical model}, title_fa = {تدوین مدلی ریاضی برای پیشبینی توان نگهداری اتصال با پین در تخته چندلا}, abstract_fa = {این پژوهش با هدف بررسی توان نگهداری اتصال با پین چوبی در تخته چندلا و به دست آوردن یک مدل ریاضی برای پیش - بینی توان نگهداری این اتصال صورت گرفته است. اعضای اتصال از تخته چندلا با ضخامت 19 میلیمتر و ساخته شده از گونه- های پهن برگ (راش، ممرز و توسکا) بودند. در این بررسی، اثر متغیرهای گونه چوب پین (راش و ممرز)، قطر پین در سه 13 و 17 میلیمتر، بر توان نگهداری پین در جهت عمود بر سطح و لبه ، 8 و 10 میلیمتر و عمق نفوذ در سه سطح 9 ، سطح 6 تخته چندلا بررسی شده است. نتایج نشان دادند که، توان نگهداری پین در جهت عمود بر سطح ولبه تخته چندلا با افزایش قطر و عمق نفوذ پین افزایش مییابد. توان نگهداری پین ممرز در سطح و لبه نسبت به پین راش بیشتر بود. بالاترین میزان 2951 ) در پین ممرز با قطر 10 و عمق نفوذ 17 میلی- N) 2447 ) و N) توان نگهداری در جهت عمود بر سطح و لبه به ترتیب 799 ) مربوط به پین N) 784 ) و N) متر دیده شده است. کمترین توان نگهداری پین در جهت عمود بر سطح و لبه به ترتیب راش با قطر 10 و عمق نفوذ 9 میلیمتر بوده است.}, keywords_fa = {توان نگهداری,تخته چندلا,پین,قطر,عمق نفوذ,مدل ریاضی}, url = {https://www.ijwp.ir/article_11503.html}, eprint = {https://www.ijwp.ir/article_11503_3da349284e2adc512816492c5c899dbf.pdf} }