@article { author = {Karimi, Fardin and Enayati, A.Akbar and Faezipour, Mahdi and D.Hosseini, Kazem}, title = {A Study on Physical and Mechanical Properties of Medium-Density Fiberboard (MDF) Made from Corn stalk and Wood fibers}, journal = {Iranian Journal of Wood and Paper Industries}, volume = {2}, number = {2}, pages = {39-52}, year = {2012}, publisher = {Iranian Scientific Association of Wood and Paper Industries}, issn = {2008-9066}, eissn = {2423-3242}, doi = {}, abstract = {To investigate the possibility of manufacturing medium-density fiberboard using corn stalk fibers, a mixture of corn stalk fibers and wood fibers in four weight levels of 0/100, 15/85, 70/30 and 45/55 and with press time of 5 and 7 minutes were used to manufacture sample boards. The results showed that an increase in amount of Maize Straw fibers leads to a decrease in MOR, MOE and IB levels in test specimens, whereas Thickness Swelling (TS) and Water Absorption (WA) increase after 2 and 24 hours of immersion in water. Furthermore, increasing press time resulted in an improvement of physical and mechanical properties of the specimens. According to statistical analyses, 15% of corn stalk fibers, with 7 minutes of press time, were founded as the optimum treatment in this study.}, keywords = {: Medium Density Fiberboard,Corn stalk,physical properties,Mechanical properties,Urea formaldehyde resin}, title_fa = {بررسی و ارزیابی ویژگی‌های فیزیکی و مکانیکی تخته فیبر با چگالی متوسط(MDF) ساخته شده ازمخلوط الیاف ساقه ذرت و گونه های چوبی}, abstract_fa = {برای بررسی و ارزیابی امکان استفاده از الیاف ساقه ذرت در ساخت تخته فیبر با چگالی متوسط، از مخلوط الیاف ساقه ذرت و الیاف گونه چوبی در چهار سطح 0/100، 15/85 ،30/70 ، 45/55 و با بکارگیری زمان پرس در دو سطح 5 و 7 دقیقه تخته‌های آزمونی ساخته شدند. نتایج به دست آمده از اندازه‌گیری ویژگی‌های فیزیکی و مکانیکی تخته‌ها نشان داد که افزایش میزان الیاف ساقه ذرت در تخته‌ها، موجب کاهش مقاومت خمشی، مدول کشسانی (الاستیسیته) و چسبندگی درونی آنها شده است در حالی که واکشیدگی ضخامت و جذب آب پس از 2 و 24 ساعت غوطه‌وری آنها افزایش پیدا کرده است. افزایش زمان پرس سبب بهبود مقاومت‌های مکانیکی و فیزیکی تخته‌ها شد. در نهایت می‌توان، بهترین تیمار در این بررسی را استفاده از 15 درصد الیاف ساقه ذرت، در زمان پرس 7 دقیقه دانست.}, keywords_fa = {تخته فیبر با چگالی متوسط,ساقه ذرت,ویژگی های فیزیکی,ویژگی های مکانیکی,چسب اوره فرم آلدهید}, url = {https://www.ijwp.ir/article_11451.html}, eprint = {https://www.ijwp.ir/article_11451_56ede536ec0c0161fce51d318c57aac9.pdf} }