[1] Ebrahimi, G., 2007. Engineering design of furniture structure. Tehran university publication, 491 pp.(In Persian).
[2] Eckelman, C. A., 2003. Textbook of product engineering and strength design of furniture. West Lafayette (IN): Purdue University Press.99p.
[3] Jones, A., Lutes, R., 1993. Handbook of joinery. New York, USA: Sterling Press.148p.
[4] Carvalho, A.G., Mori, F.A., Mendes, R.F., Zanuncio, A.J.V., Silva, M.G., Mendes, L.M., Selvati , C.L. and Mori O., 2014. Use of tannin adhesive from
Stryphnodendron adstringens (Mart.) Coville in the production of OSB panels.
European Journal of Wood and Wood Products, 72: 425-432.
[5] Dunky, M., 1998. Urea-formaldehyde (UF) adhesive resins for wood. International Journal of Adhesion and Adhesives, 18: 95–107.
[6] Lopez, B.L, Mejia, A.I., Sierra, L.,1999. Biodegradability of poly(vinyl alcohol) . Polymer Engineering and Science,39:1346-1352.
[7] Sedlarik, V. N., Saha, I., Kuritka, P., Saha, P., 2007. Environmentally friendly biocomposites based on waste of the dairy industry and poly(vinyl alcohol) . Journal of Applied Polymer Science, 106(3): 1869-1879.
[8] Abdul Khalil, H.P.S., Bhat, A.H. and Ireana Yusra, A.F., 2012. Green composites from sustainable cellulose nanofibrils. a review, Carbohydrate Polymers, 87: 963-979.
[9] Dobreva, T., Benavente, R., Perena, J.M., Perez, E., Avella, M. and Garcia, M., 2010. Effect of different thermal treatments on the mechanical performance of poly (l-lactic acid) based eco-composites. Journal of Applied Polymer Science, 116: 1088-1098.
[10] Cherian B.M., Leao A.L., de Souza S.F., Costa L.M.M., de Olyveira G.M. and Kottaisamy M., 2011. Cellulose nanocomposites with nanofibres isolated from pineapple leaf fibers for medical applications. Carbohydrate Polymers, 86(4): 1790–1798.
[11] Nair, S.S., Zhu, J.Y., Deng, Y. and Ragauskas, A.J., 2013. Hydrogels prepared from cross-linked nanofibrillated cellulose. ACS Sustainable Chemistry & Engineering, 2 (4): 772–780.
[12] Rosilo, H., Kontturi, E., Seitsonen, J., Kolehmainen, E. and Ikkala, O., 2013. Transition to reinforced state by percolating domains of intercalated brush-modified cellulose nanocrystals and poly(butadiene) in cross-linked composites based on thiol−ene click chemistry. Biomacromolecules, 14 (5): 1547–1554.
[13] Chen, Y., Liu, C., Chang, P.R., Anderson, D.P. and Huneault, M.A., 2009. Pea starch-based composite films with pea hull fibers and pea hull fiber-derived nanowhiskers. Polymer Engineering and Science, 49: 369–378.
[14] Lin N.and Dufresne A., 2013. Physical and/or chemical compatibilization of extruded cellulose nanocrystal reinforced polystyrene nanocomposites. Macromolecules, 46 (14): 5570–5583
[15] Espinosa, S.C., Kuhnt, T., Foster, E.J. and Weder, C., 2013. Isolation of thermally stable cellulose nanocrystals by phosphoric acid hydrolysis. Biomacromolecules, 14 (4): 1223–1230.
[16] Iwamoto, S., Nakagaito, A.N., Yano, H.and Nogi, M.,2005. Optically transparent composites reinforced with plant fiber-based nanofibers. Appl Phys A, 81:1109–12.
[17] Roohani, M., Ebrahimi, Gh., Karimi, A.N., Dufran, A. and Beghasem, M.N., 1387. Evaluation of physical, mechanical and dynamical properties of NCC/PVA based nanocomposites. Iranian journal of natural resources and wood products, 62(3):295-245. (In Persian).
[18] Veigel, S., Muller, U., Keckes, J., Obersriebnig, M.and Gindl-Altmutter, W., 2011. Cellulose nanofibrils as filler for adhesives: effect on specific fracture energy of solid wood-adhesive bonds. Cellulose, 18:1227–1237.
[19] Veigel, S., Rathke, J., Weigl, M.and Gindl-Altmutter,W., 2012. Particleboard and oriented strand board prepared with nanocellulose-reinforced adhesive. Journal of Nanomaterials, 2012 (2012): 158503.
[20] Altun, S., Burdurlu, E. and Kilic, M., 2010. Effect of adhesive type on the bending moment capacity of miter frame corner joints. Bioresources, 5(3): 1473-1483.
[21] Klic, M., Burdurlu, E., Altun, S. and Berker, O.U., 2009. The bending moment capacities of mitre frame corner joints with dovetail fittings. Wood Research, 54(3): 79-88.
[22] Dalvand, M., GH, ebrahimi., Tajvidi, M. and layeghi, M., 2014. Investigation the stress carrying capacity of corner joints in the furniture frame fabricated with dowel. Journal of wood and paper industries of Iran, 5(2): 37-46.
[23] Standard Test Methods for Small Clear Specimens of Timber. Annual Book of ASTM Atandard, D 143. 2000.
[24] Roumeli, E., Papadopoulou, E., Pavlidou, E., Vourlias, G., Bikiaris, D., Paraskevopoulos, K.M. and Chrissafis, K., 2012. Synthesis, characterization and thermal analysis of urea–formaldehyde/ nanoSiO2 resins. Thermochimica Acta, 527: 33– 39.
[25] Zhang, J. L. and Eckelman, C. A., 1993. The bending moment resistance of single–dowel corner joints in case construction. Forest Products Journal, 43(6):19–24.
[26] Kaboorani, A., Nicolas Auclair, N., Riedl, B. and Landry, V., 2016. Physical and morphological properties of UV-cured cellulose nanocrystal (CNC) based nanocomposite coatings for wood furniture. Progress in Organic Coatings, 93: 17-22.
[27] Virozub, A.,
Haimovich, N.and
Brandon, S., 2009. Three dimensional simulations of liquid bridges between two cylinders: Forces, Energies and Torques. Langmuir, 25:12836-12842.
[28] Lee, S.Y., Mohan, D.J., Kang, I.A., Doh, G.H., Lee, S. and Han, S., 2009. Nanocellulose Reinforced PVA Composite Films: Effects of Acid Treatment and Filler Loading.
Fibers and Polymers, 10(1): 77-82.
[29] Sakurada, I., Nukushina, Y. and Ito, T., 1962. Experimental determination of elastic modulus of crystalline regions in oriented polymers. Journal of Polymer Science, 57(165):651–660.
[30] Hajji, P., Cavaillé, J. Y., Favier, V., Gauthier, C. and Vigier, G.,1996.Tensile behavior of nanocomposites from latex and cellulose whiskers. Polymer Composites, 17, 612–619.
[31]Veigel, S., Muller, U., Keckes, J., Obersriebnig, M. and Gindl-Altmutter, W., 2011. Cellulose nanofibrils as filler for adhesives: effect on specific fracture energy of solid wood-adhesive bonds. Cellulose, 18:1227–1237.
[32] Pirayesh, H., Azadfalah, M., Doosthoseini, K., Belesi, P. and Yousefi, H., 1394. Effect of different drying methods on cellulosic nanofibers and their resulting composites. Journal of wood and paper industries of iran, 6(2): 285-298.
[33] Liu, Y. and Zhu, X., 2014. Measurement of formaldehyde and VOCs emissions from wood-based panels with nanomaterial-added melamine-impregnated paper. Construction and Building Materials, 66: 132-137.
[34] Kwon, J.H., Lee, S.H., Ayrilmis, N., Han. and T.H., 2016. Tensile shear strength of wood bonded with urea–formaldehyde with different amounts of microfibrillated cellulose. International Journal of Adhesion and Adhesives, 60: 88-91.
[35] Tajvidi, M., Motie, N., Rassam, G., Falk, R.H. and Felton, C., 2010. Mechanical performance of hemp fiber polypropylene composites at different operating temperatures. Journal of Reinforced Plastics and Composites, 29(5):664–674.
[36] Kaboorani, A., Riedl, B., Blanchet, P., Fellin, M., Hosseinaei, O.and Wang, S., 2012. Nanocrystalline cellulose (NCC): A renewable nano-material for polyvinyl acetate (PVA) adhesive. European Polymer, l(54):1829-1837.
[37] Smardzewski, J., 2015. Introduction to Engineering Design of Furniture. In Furniture Design (pp. 185-283). Springer, Cham.
[38] Zhang, J. L. and Eckelman, C. A., 1993. The bending moment resistance of single–dowel corner joints in case construction. Forest Products Journal, 43(6):19–24.
)