[1] Xu, Z.B, Tang, X.L., Gu, A.J. and Fang, Z.P., 2007. Novel preparation and mechanical properties of rigid polyurethane foam/organoclay nanocomposites. Applied Polymer Science, 106 (4): 439-442.
[2] Petrovic, Z.S., Yang, L., Zlatanic, A., Zhang, W. and Javni, I., 2007. Network structure and properties of polyurethanes from soybean oil. Applied Polymer Science, 105 (5): 2717–2727.
[3] Sercer, M., Raos, P. and Rujni Sokele, M., 2012. Study on thermal properties of synthetic and bio-based polyurethane. Science Journal, 5 (2): 1-11.
[4] Hatakeyama, H., Kosugi, R. and Hatakeyama, T., 2008. Thermal properties of lignin-and molasses-based polyurethane foams.Thermal Analysis and Calorimetry, 92 (2): 419-424.
[5] Zheng, Z., Pan, H., Huang, Y., Chung, Y.H., Zhang, X. and Feng, H., 2011. Rapid liquefaction of wood in polyhydric alcohols under microwave heating and its liquefied products for preparation of rigid polyurethane foam.The Open Materials Science Journal, 5 (3): 1-8.
[6] Xu, J., Jiang, J., Hse, C.Y. and Shupe, T.F., 2013. Preparation of polyurethane foams using fractionated products in liquefied wood. Applied Polymer Science, 84 (4): 1-7.
[7] Demirbas, A., 2010. Biorefineries for biomass upgrading facilities. Green Energy and Technology, 12 (2): 139-149.
[8] Chen, F. and Lu, Z., 2009. Liquefaction of wheat straw and preparation of rigid polyurethane foam from the liquefaction products. Applied Polymer Science, 111 (3): 508-516.
[9] Lee, S.H., Yoshioka, M. and Shiraishi, N., 2000. Liquefaction of corn bran (CB) in the presence of alcohols and preparation of polyurethane foam from its liquefied polyol. Applied Polymer Science, 78 (3): 319-325.
[10] Satpathy, P., Thosa A. and Rajan, A.R., 2014. Green technology for glycerol waste from biodiesel plant. Current Microbioloy and Applied Science, 3 (2): 730-739.
[11] Hu, S., Wan, C. and Li, Y., 2012. Production and characterization of bio-polyols and polyurethane foams from crude glycerol based liquefaction of soybean straw. Bio-resource Technology, 103 (5): 227–233.
[12] Hu, S. and Li, Y., 2014. Two-step sequential liquefaction of lignocellulosic biomass by crude glycerol for the production of polyols and polyurethane foams. Bioresource Technology, 161 (6): 410–415.
[13] Kosmela, P., Hejna, A., Formela, K., Haponiuk, J.K. and Piszczyk, L., 2016. Bio-polyols obtained via crude glycerol-based liquefaction of cellulose: their structural, rheological and thermal character. Cellulose, 23: 2929–2942.
[14] Standard Test Method for Acid Value Determination of polyester or polyether polyols. ASTM D 4662, 2008.
[15] Standard Test Method for Hydroxyl Value Determination of polyester or polyether polyols. ASTM D 4274, 2005.
[16] Wang, Y., Wu, J., Wan, Y.L.H., Yu, F., Chen, P., Lin, X., Liu, Y. and Ruan, R., 2009. Liquefaction of corn stover using industrial biodiesel glycerol. Agricultural and Biological Engineering, 2 (2): 32–40.
[17] Standard Test Method for Viscosity Determination of Asphalt at Elevated Temperatures Using a Rotational Vis-cometer. ASTM D 4878, 2008.
[18] Biswas, A.K. and Ganguly, D., 1960. Esterification of fatty acids with glycerol. Nature, 188: 56-57.
[19] Yao, Y., Yoshioka, M. and Shiraishi, N., 1995. Rigid polyurethane foams from liquefaction mixture of wood and starch. Mokuzai Gakkaishi, 41 (7): 659-668.