استفاده از سرشاخه های درخت توت در ساخت تخته خرده چوب

نوع مقاله : مقاله پژوهشی

نویسندگان

1 استادیار گروه علوم و صنایع چوب و کاغذ، دانشکده کشاورزی و منابع طبیعی، دانشگاه گنبدکاووس، گنبد، ایران

2 کارشناس ارشد گروه علوم و صنایع چوب و کاغذ، دانشکده کشاورزی و منابع طبیعی، دانشگاه گنبدکاووس، گنبد، ایران

چکیده

در این پژوهش از سرشاخه های حاصل از هرس درختان توت به صورت مخلوط با خرده چوب صنعتی در ساخت تخته خرده چوب استفاده شد. سپس خواص فیزیکی و مکانیکی پانل های ساخته شده مورد بررسی قرار گرفت. بین منظور متغیرهای این تحقیق شامل مقدار اختلاط سرشاخه توت با خرده چوب صنعتی در چهار سطح 100:0، 90:10، 80:20 و 70:30 درصد و مقدار مصرف چسب اوره فرمالدهید در دو سطح 12 و 14 درصد وزن خشک خرده چوب بودند. نتایج حاصل نشان داد که افزایش مقدار مصرف ذرات حاصل از سرشاخه توت تا 20 درصد تأثیر منفی بر خواص فیزیکی و مکانیکی تخته ها نداشته است. اما افزایش مصرف این سرشاخه ها تا 30 درصد تآثیر منفی بر خواص فیزیکی و مکانیکی تخته ها داشته که در مقابل با افزایش مقدار مصرف چسب اوره فرمالدهید تا 14 درصد، می توان پایداری ابعادی تخته ها، مقاومت خمشی، مدول الاستیسیته و چسبندگی داخلی آنها را بهبود داد.

کلیدواژه‌ها

موضوعات


[1] García-Ortuño, T., Ferrández-Villena, M., Ferrández-García, M.T., Andreu-Rodríguez, J. and Ferrández-García, C.E., 2013. Influence of the pre-treatment on the mechanical properties of medium density particleboards from mulberry. Vii Congress Ibérico De Agreoingenieria and Horticultural Science.
[2] Li, J.M., Wang, J., Fu, Y.J. and Ma, T., 1996. Mulberry stalk pulping and papermaking. The third international conference of non-wood fiber pulping and papermaking. China paper company, Beijing, Part 1. PP: 203-211.
[3] Rahman, K., Shaikh, A., Rahman, M., Alam, D. and Alam, M., 2013. The Potential for Using Stem and Branch of Bhadi (Lannea Coromandelica) As a Lignocellulosic Raw Material for Particleboard. International Research Journal of Biological Sciences, 2(4):8-12.
[4] Guntekin, E., Uner, B., Turgut Sahin, H. and Karacus, B., 2008. Pepper Stalks (Capsicum annuum) as Raw Material for Particleboard Manufacturing. Journal of Applied Sciences, 8(12):2333-2336.
[5] Bektas, I., Guler, C., Kalaycioglu, H., Mengeloglu, F. and Nacar, M., 2005. The manufacture of particleboards using sunflower stalks (Helianthus annuus) and poplar wood (Populus alba L.). Journal of Composite Materials, 39 (5): 467–473.
[6] Nemli, G., Demirel, S., Gumuskaya, E., Aslan, M. and Acar, C., 2009. Feasibility of incorporating waste grass clippings (Lolium perenne L.) in particleboard composites. Waste Management, 29: 1129–1131.
[7] Guntekin, E. and Karakus, B., 2008. Feasibility of using eggplant stalks (Solanum melongena) in the production of experimental particleboard. Industrial Crops and Products, 27: 354–358.
[8] Guler, C., Copur, Y. and Buyuksari, U., 2009. Producing particleboards from hazelnut (Coryllus avellana L.) husk and European black pine (Pinus nigra Arnol.). Wood Research, 54 (1): 125–132.
[9] Guler, C., Copur, Y. and Tascioglu, C., 2008. The manufacture of particleboards using mixture of peanut hull (Arachis hypoqaea L.) and European black pine (Pinus nigra Arnold) wood chips. Bioresource Technology, 99: 2893–2897.
[10] Acda, M. and Cabangon, R., 2013. Termit resistance and physic-mechanical properties of particleboard using waste tobacco stalk and wood particles. International Biodeterioration & Biodegradation, 85: 354-358.
[11] Li, X., Cai, Zh., Winandy, J. E. and Basta, A. H., 2010. Selected properties of particleboard panels manufactured from straws of different geometries. Bioresources Technology, 101: 4662-4666.
[12] Nemli, G., Kirel, H., Serdar, B. and Ay, N., 2003. Suitability of Kiwi pruning for particleboard manufacturing. Industrial Crops Products, 17:39-46.
[13] Guntekin, E., Uner, B. and Karacus, B., 2009. Chemical composition of tomato (Solanum lycopersicum) stalk and suitability in the particleboard production. Journal of Environmental Biology, 30(5):731-734.
[14] Copur, Y., Guler, C., Akgul, M. and Tascioglou, C., 2007. Some chemical properties of hazelnut husk and its suitability for particleboard production. Building and Environment, 42: 2568-2572.
[15] Ayrilmis, N., Buyuksari, U., Avci, E. and Koc, E., 2009. Utilization of pine (Pinus pinea L.) cone in manufacture of wood based composite. Forest Ecol Manag, 259(1):65-70.
[16] Moya, R., Camacho, D., Soto F, R. and Mata-Segreda, J., 2015. Internal bond of particleboards made of three wood species mixture with empty fruit bunch of Elaeis quineensis, leaves of Ananas comosus or tetra park. Journal of agricultural Science, 4(6): 241-247.
[17] Garay, R. M., MacDonald, F., Acevedo, M. L., Calderόn,B. and Araya, J. E., 2009. Particleboard made with crop residues mixed with wood from Pinus radiate. Bioresources, 4(4): 1396-1408.
[18] Lee, S., Shupe, T. F. and Hse, C. Y., 2004. Utilization of Chinese tallow tree and bagasse for medium density fibreboard.  Forest Products Journal, 54(12): 71-76.
[19] Pan, Zh., Cathcart, A. and Wang, D., 2006. Properties of particleboard bond with rice bran and polymeric methylene diphenyl diisocyanate adhesives. Industrial Crops and Products, 23: 40-45.
[20] Klἱmek, P., Meinlschmidt, P., Wimmerm R., Plinke, B. and Schirp, A., 2016. Using sunflower (Helianthus annuus L.), topinambour (Helianthustuberosus L.) and cup-plant (Silphium perfoliatum L.) stalks asalternative raw materials for particleboards. Industrial Crops and Products, 92: 157-164.
[21] Maloney, T.M., 1993. Modern Particleboard and Dry-Process Fiberboard Manufacturing (updated edition), Miller Freeman, San Francisco, 681 p.