Effect of chitosan-nanosilica self-assembly layers chitosan- on cotton linter fibers and the paper properties

Document Type : Research Paper

Authors

Abstract

Surface properties of cellulosic fibers can be modified by Layer-by-Layer (LbL) technique. Cotton fibers are one of important non-wood and industrial cellulosic resources in the world. Cotton linters is produced as a by-product accompany with cotton fibers which is used as a significant cellulosic sources in paper industry for producing durable paper. In this research, the influence of alternate adsorption of cationic chitosan and anionic Nanosilica on modification of fiber surface of cotton linter was investigated. The adsorption of materials on cellulosic fibers was analyzed via electrolyte titration. Experiments were conducted at pH≈3-4 for formation of cationic layer and pH≈9-10 for formation of anionic layer applying stirring rate of about 750rpm, for15 minute deposition time to construct 1 to 3 layers. Hand sheets of about 60 g/ m2 basis weight were made form modified pulp fibers prepared by multilayering of chitosan and nanosilica, then their structural properties and bonding ability were evaluated. Bonding ability of fibers was improved by polyelectrolyte multilayering (PEM) on the surface of cotton linter fibers which was visualized by Field Emission Scanning Electron Microscopy (FESEM).The results showed that apparent density and also bonding ability was improved in the treated fibers because of the increased electrostatic attraction between polycation and anion sites existed on the fiber surface. Apparant density of paper was improved remarkably compared to the untreated fibers. Tensile index of the sheet was increased about 16% with consecutive adsorption onto the cotton linter fibers compared to untreated fibers. Formation index of paper was slightly deteriorated after polyelectrolytes multilayering.

Keywords


[1]     Yunqiao, P., Dongcheng, Z. and  Ragauskas, A.J., 2007. Developments in engineering fibers, Pira International Ltd, 80 p.
[2]     Lingstro, m, A. and Wagberg, L., 2008. Polyelectrolyte multilayers on wood fibers. Influence of molecular weight on layer properties and mechanical properties of papers from treated fibers. Journal of Colloid and Interface Science, 328, 233-242.
[3]     Agarwal, M., Xing Q., Shim, B.S., Kotov, N., Varahramyan, K. and Lvov, Y. M., 2009. Conductive paper from lignocellulose wood microfibers coated with a nanocomposite of carbon nanotubes and conductive polymers. Nanotechnology,215602, 1-8 (20).
[4]     Nicu, R., Bolou, E. and Desbrieres, J., 2011. Chitosan as cationic polyelectrolyte in wet-end Papermaking Systems. Cellulose Chemistry and Technology, 45(1-2):105-111
[5]     Wagberg, L., Winter, L., 1999. Application of wet end paper chemistry, Chapter1, papermaking Chemicals and their Functions, Springer, Netherland, 1-12 p.
[6]     Wagberg, L., Forsberg, S., Johansson, A. and Juntti, P., 2002. Engineering of fiber surface properties by application of the polyelectrolyte multilayer concept, part 1: Modification of paper strength. Journal of Pulp and Paper Science, 28: 222-228.
[7]     Rudi, H., Ebrahimi, Gh., Hamzeh, Y., Behrooz ,R. and Nazhad, M. M., 2012. The Effect of Degree of Substitution of cationic starch on Multi-layer Formation of Ionic Starches in Recycle Fibers. Iranian Journal of Polymer Science and Technology, 25(1):11-18. (In Persian).
[8]     Fatehi,P., Qian, L., Kititerakun, R., Rirksomboon,T. and Xiao, H., 2009. Complex formation of modified chitosan and carboxymethyl cellulose and its effect on paper properties. TAPPI Journal, 8(6):29-35.
[9]     Imani, R., Talaiepour, M., Dutta, J., GhobadineZhad, M., Hemmasi, A., Nazhad, M., 2011. Production of antibacterial filter paper from wood cellulose. BioResouces, 6(1):891-900.
[10]  Mahdavi, S. 2003. Linter of cotton as an important source of alpha cellulose in world. In: The first congress on cellulose processing & utilizations. Oct.1-2, Tehran, Iran, P 149-156. (In Persian).
[11]  William, E. Scott., Properties of paper: An introduction. 1995. (Tanslated by Afra, E., Persian, Aij press, Tehran, 2006, 360P. (In Persian).
[12]  Eriksson, M., Notley, S.M. and Wagberg, L., 2005. The influence on paper strength properties when building multilayers of weak polyelectrolytes onto wood fibers. Journal of Colloid and Interface Science, 292: 38-45.
[13]  Hamzeh, Y. and Akbar, R., 2008. Principals of papermaking chemistry, Tehran University publications, Tehran, 424P. (In Persian).
[14]  Lu, Z., Eadula, S., Zheng, Z., Xu, K., Grozdits, G, and Lvov, Y., 2007. Layer-by-Layer nanoparticle.Nordic Pulp and Paper Research Journal, 21(5), 2006: 552-557.
[15]  Rahmaninia, M., Mirshokraei, S. A., Ebrahimi, G. and Nazhad, M. M., 2009. Improving drainage and strength of OCC pulp using cationic starch-nanosilica system, PhD Thesis, University of Tehran, February.90p. (In Persian).
[16]  Maurer, H. 1998. Opportunities and challenges for Starch in the Paper industry. Starch/Stärke, 50: 396-402.
[17]  Decher, G., 1997. Fuzzy nanoassemblies: Toward layered polymeric multicomposites. Science, 277 (5330): 6-15.