[1] Siegel, R W, Hu, E, Roco, M C, eds. 1999. Nanostructure Science and Technology.
Springer (former Kluwer Academic Publishers): Dordrecht, Netherlands
[2] Evans, P D, Matsunaga, H, Kiguchi, M. 2008. Large-scale application of nanotechnology
for wood protection. Nature Nanotechnology 3(10), 577.
[3] Taghiyari, H. 2010. Study on the Effect of Nano-Silver Impregnation on Mechanical
Properties of Heat Treated Populus nigra.Wood Sci Technol. DOI 10.1007/s00226-010-
0343-5.
[4] Taghiyari, H., Rangavar,H. and Farjpour, O. 2011. Effect of Nano-Silver on production
of hot-pressing and improvement in physical and mechanical properties of particleboard.
Bioresources. 6(4): 4067-4075.
[5] Ghorbani, M., Akhtari, M., Taghiyari, H.R. and Kalantari, A. 2012. Effects of silver and
zinc-oxide nanoparticles on gas and liquid permeability of heat-treated Paulownia wood.
Austrian Journal of Forest Science. 129(1): 106 – 123.
[6] Ellis, J.R .,2007. Silver as a wood presertive. Enviormental requirement and concerns.
IRG on Wood protection Doc. No. IRG/WP 07-30420
[7] McIntyre, C. R. 2010. Comparison of Micronized Copper Particle Sizes, IRG/WP 10-
30538, 41st IRG/WP conference Annual Meeting,Biarritz, France.
[8] Cooper, P.A. & Ung, T.Y. 2009. Component leaching from CCA, ACQ and a micronized
copper quat (MCQ) system as affected by leaching protocol. Int. Res. Group on Wood Prot.
Doc. IRG/WP 09-50261.
[9] Freeman, M.H. & McIntyre, C.R. 2008. A comprehensive review of copper-based wood
preservatives with a focused on new micronized or dispersed copper systems. Forest Products
J., 58(11): 6-27.
[10] Cayton, R H, Sawitowski, T. 2006. The impact of nano-materials on UV-protective
coatings. http://www.nsti.org/Nanotech2006/showabstract.html?absno=854. 18/02/2010
[11] Clausen, C.A., 2007. Nanotechnology: Implications for the Wood Preservation Industry.
International Research Group on Wood Protection, Stockholm,Sweden, IRG/WP/07-30415.
15 p
[12] Taghiyari, H.R. 2011 Effects of nano-silver on gas and liquid permeability of
particleboard. Digest Journal of Nanomaterials and Bioresources, Vol. 6, No 4, October-
December, p. 1517 – 1525.
[13] Matsunaga, H, Kiguchi, M, Evans, P. 2007. Micro-Distribution of Metals in Wood
Treated with a Nano-Copper Wood Preservative. International Research Group on Wood
Protection.
[14] Severa, L., Buchar J., Krivanek I., 2003. The influence of the moisture content on the
fracture of the notched wood beam. 8th International IUFRO Wood Drying Conference
[15] Kalaycioglu, H., Deniz, I., Hiziroglu, S. 2005. Some of the properties of particleboard
made from paulownia. J. Wood Sci. 51: 410-414.
[16] Flynn H, Holder C (2001). Useful wood of the world. Forest Products Society 2nd Ed.,
Madison, WI, 618p.
ارزیابی تاثیر نانو اکسیدروی بر خواص فیزیکی و مکانیکی...
84
[17] Baronas R., Ivanauskas F., Juodeikienė I., Kajalavicius A., 2001. Modelling of Moisture
Movement in Wood during Outdoor Storage. Nonlinear Analysis: Modelling and Control,
6(2), 3-14.
[18] Yang, R, Li, Y, Yu, J (2005): Photo-stabilization of linear low density polyethylene by
inorganic nano-particles. Polymer Degradation and Stability, 88(2), 168-174.