Study on the Possibility of Using Sunflower Stalk in Particleboard Production

Document Type : Research Paper

Authors

Abstract

In this study, the possibility of using sunflower stalk for composite-board manufacturing was studied. Density of the boards were 0.45 g/cm3; variables included mixing ratios of sunflower stalk and industrial wood particles (100:0 , 70:30 , 50:50 , 30:70 and 0:100), type of  resin at two levels of urea formaldehyde and isocyanate (PMDI)or polymeric diphenylmetane 4-4-Diisocyanate, and press-time of 5 and 7 minutes. Thickness swelling (TS) after 2 & 24 hours soaking in water, damping of sound (Damp), modulus of rupture (MOR), modulus of elasticity (MOE) and internal bonding (IB) of the boards were measured. The results showed that by increasing sunflower stalk particles, the amounts of TS 2&24, MOR, MOE and IB of laboratory panel were significantly increased. Isocyanate resin reduced thickness swelling after 2&24 hours soaking in water and increased damping of sound as well as modulus of elasticity. Also, urea formaldehyde resin improved modulus of rupture and internal bonding of panels. Press temperature had significant impact on the measured properties. Overall, using sunflower stalk particles up to 70 percent, isocyanate resin, and press time of 7 minutes, could result in producing boards with acceptable physical & mechanical properties which are suitable for interior uses.

Keywords


1-آقاگل پور، و.، رنگ آور،ح.، 1389. بررسی امکان استفاده از ساقه کلزا درساخت تخته خرده چوب، پایان نامه کارشناسی ارشد، دانشگاه شهید رجایی، دانشکده عمران، 102صفحه
2-اروشوستروم.، 1381، شیمی چوب، ترجمه احمد میرشکرایی ، انتشارات آئیژ تهران، چاپ اول ،195صفحه
3-ای پی زی .،1373. شیمی و تکنولوژی چسب چوب، ترجمه احمد میرشکرایی، انتشارات دانشگاه تهران، چاپ اول،350صفحه
4-جک، اف کارتر.، 1373. علوم وتکنولوژی آفتابگردان، مترجم یوسف عرشی، انتشارات اداره کل پنبه و دانه­های روغنی ایران، تهران،چاپ اول، 735صفحه
5-دوست حسینی،ک.، نوربخش، ا.، 1375. بررسی ویژگی­های صوتی تخته­خرده­چوب عایقی، مجله منابع طبیعی ایران،(شماره49)، ص86-75
6-دوست حسینی،ک.،1386. فناوری تولید وکاربرد صفحات فشره چوبی ،انتشارات دانشگاه تهران، چاپ دوم، 716صفحه
7-راجر رول، رایموند یانگ،جودی رول.، 1381، کاغذ و موادچند سازه از منابع زراعـی، ترجمه فائزی­پور، کبورانی، پارساپژوه، انتشارات دانشگاه تهران، چاپ اول،573 صفحه
8-رودی، ح.، 1385. بررسی تولید خمیر کاغذ نیمه شیمیایی سولفیت خنثی از ساقه آفتابگردان و ارزیابی آن بمنظورتولید کاغذ کنگره­ای در صنایع چوب وکاغذ مازندران، مجله علوم کشاوزی و منابع طبیعی، سال سیزدهم،(شماره2)، 10صفحه www.magiran.com.jasnr
9-ژ،بادینگ.،ب،جین.، 1368. مکانیک چوب­ و فراورده­های ­مرکب ­آن، ترجمه­ قنبر ابراهیمی، انتشارات­ دانشگاه ­تهران، چاپ اول،68 صفحه
10-طارمیان،ا.،دوست حسینی،ک.،1382. بررسی امکان استفاده ازالیاف پسماند کارخانه چوب وکاغذ مازندران درساخت تخته خرده چوب،پایان نامه کارشناسی ارشد، دانشکده منابع طبیعی، دانشگاه تهران، 90صفحه
11-کارگرفرد، ا.، نوربخش، ا.، گلبابایی، ف.، 1385. بررسی امکان کاربرد ساقه پنبه در ساخت تخته­خرده چوب، دو فصلنامه علمی­پژوهشی تحقیقات علوم چوب و کاغذ ایران جلد 21، (شماره 2)، ص 104-95   12-یاوری، ع.، روح نیا، م.، 1387. شناسایی معایب چوب صنوبر توسط ارتعاش در تیر دو سر آزاد، پایان نامه کارشناسی ارشد، دانشگاه­آزاد اسلامی، واحد مهرشهر، 98صفحه
13- A.Ince:S.Ugurluay:E.Guzel:M.T.Ozcan.2005. Bending and shearing characteristics of sunflower stalk residue.Silsoe research Institue.Biosystem Engineerig , 92(2),175-181
14-ANSI Standard  from NPA 1997, type2 for  low density  particleboard<640kg / m3
15-Din EN 312-3,1996.Particleboard requirements for board for interior fitments(including furniture) for use in dry condition
16-European Standard EN312Typy2,2003, particleboard Specification part2.requirements for interior fitments(including furniture) for use in dry condition.European committee for standardization, Brussles, Belguim.
17-Francesco Balducci1, Charles Harper2, Peter Meinlschmidt3, Brigitte.Dix4. Alfredo sanasi5 2008Development of innovative Particleboard panels.Drvna industrija 59(3)131-136 
18-Gertjejansen, R. O.. 1977. Properties of particleboard from sunflowerstalks and aspen  Planer shvings. Tech. Buil. 290. Univ. Of Minnesota Agric. Expt. Sta. 5pp
19- Khristova, P., N. Yussifou, S. Gabir, I. Glavche, and Z. Osman. 1998. Particleboards from sunflower stalks and tannin modified UF resin. Cellulose Chemistry and Tech. 32:327-337.
20-Lebedev,VS, et al,1971. Effect of  technological factors on the acoustic and physical and mechanhcal properties of particleboard.Dever.prom.20(6):12-15
21-Terry sellers jr 1996.Based Lignocellulosic Composite made of core from Kenaf .
commertial Application for Stalks and Head  journal of industrial Crosp and products
22-Tsomis, G.,1991. Science and Tecnology of wood.  Structure properties, Utilisation. Van Nostrand Renhold, New york.
23-Xiaoqum mo.april2003. physical properties of medium density weat straw particleboard using different adhesive department of Grain science &industry.kansas state university,201 shellenburger Hal, Manhatan, KS 66506, U8A