@article { author = {ترکمن, جواد and aghajankordi, mohamad and Rangavar, Hossein}, title = {The effect of electric shock on the physical and mechanical properties of beech wood}, journal = {Iranian Journal of Wood and Paper Industries}, volume = {11}, number = {3}, pages = {355-363}, year = {2020}, publisher = {Iranian Scientific Association of Wood and Paper Industries}, issn = {2008-9066}, eissn = {2423-3242}, doi = {}, abstract = {Wood heating is the oldest method for reducing of water absorption of wood. Today, electric heating is used to transmit high voltage current through materials using two electrodes. The aim of this study is to investigate the effect of electric shock on the physical and mechanical properties of Iranian beech wood( Fagus orientalis L). Electric shock applied to the wood samples in five different voltage and three different pressures in the reactor. The experimental design was a factorial experiment on the basis of a completely randomized design .The results show that electric shock of beech wood improves all its physical and mechanical properties. The best results obtained at atmospheric pressure and electric current of 600 volt.In this situation, Moduli of elasticity became treble and Moduli of Rapture increased 20% based on control sample. Also obtained 20 % Anti-Swelling efficiency.}, keywords = {electric shock,Beech,Moduli of elasticity,Moduli of Rapture,anti-swelling efficiency}, title_fa = {بررسی اثر شوک الکتریکی بر خواص فیزیکی و مکانیکی چوب راش (Fagus orientalis)}, abstract_fa = {حرارت دادن چوب قدیمی‌ترین روش کاهش خاصیت نم پذیری است. امروزه از گرمادهی الکتریکی برمبنای عبور دادن جریان با ولتاژ بالا از درون مواد با به‌کارگیری دو الکترود استفاده می‌شود؛ بنابراین هدف این پژوهش بررسی اثر شوک ناشی از عبور جریان الکتریسیته بر خواص فیزیکی و مکانیکی چوب راش (Fagus orientalis) ایرانی است. عوامل متغیر در نظر گرفته‌شده شامل ولتاژ جریان الکتریسیته در پنج سطح و مقدار فشار در سه سطح بود. برای آنالیز و تجزیه‌وتحلیل داده‌های حاصل از اندازه‌گیری خواص فیزیکی و مکانیکی از روش فاکتوریل دوعامله استفاده شد. نتایج نشان داد که شوک الکتریکی چوب راش کلیه خواص فیزیکی و مکانیکی اندازه‌گیری شده را بهبود بخشیده است. بهترین نتیجه در فشار اتمسفر و ولتاژ 600 ولت به دست آمد بطوریکه مقاومت خمشی نسبت به نمونه شاهد 20 درصد افزایش و مدول الاستیسیته تقریباً سه برابر شد. شوک الکتریکی در حدود 20 درصد واکشیدگی و همکشیدگی چوب راش را کاهش داد.}, keywords_fa = {شوک الکتریکی,راش,مدول الاستیسیته,مقاومت خمشی و کاهش واکشیدگی}, url = {https://www.ijwp.ir/article_38025.html}, eprint = {https://www.ijwp.ir/article_38025_9aa466b5cebe4c649f646ddf19f7fbc3.pdf} }