@article { author = {قربانی, مریم and nikkhah, َAzadeh and toopa, afsaneh}, title = {Effect of densification on the practical properties of chemical and thermal modified poplar wood}, journal = {Iranian Journal of Wood and Paper Industries}, volume = {11}, number = {2}, pages = {185-197}, year = {2020}, publisher = {Iranian Scientific Association of Wood and Paper Industries}, issn = {2008-9066}, eissn = {2423-3242}, doi = {}, abstract = {For investigation on the effect of densification on the physical and mechanical properties of the chemically and thermally modified poplar wood (Populus deltoides), thermal modification at 170°C, chemical modification with glutaraldehyde, and compression at three levels of 10, 25, and 40% at the hot pressing time of 2h were carried out. With increasing compression ratio from 25 to 40%, the density of thermally and chemically modified samples increased by 13% and 8%, respectively. Spring back and moisture absorption of the thermally modified/compressed samples was more than chemically modified/compressed ones. Water absorption and thickness swelling for 10% compression ratio were more than the chemical and thermal control samples but significantly decreased with increasing compression ratio. The mechanical properties of both thermally and chemically modified samples were improved with increasing compression ratio. From 25 to 40% compression, improvement of bending modulus for both modified samples were more than 10 to 25%, which was more significant for the thermally modified samples. Bending strength was also improved with increasing compression ratio, but the intensity of improvement decreased by 40% compression. Increasing of compression ratio also led to a significant improvement of the compression strength parallel to grain and hardness, which was more obvious for glutaraldehyde modified specimens than the thermally modified ones.}, keywords = {Densification,Glutaraldehyde,Thermal modification,physical properties,Mechanical properties}, title_fa = {اثر فشرده‌سازی بر خواص کاربردی چوب صنوبر اصلاح‌شده به روش‌های شیمیایی و گرمایی}, abstract_fa = {در بررسی اثر فشرده­سازی بر خواص فیزیکی و مکانیکی گونه صنوبر دلتوئیدس (Populus deltoides) اصلاح شیمیایی و گرمایی شده، اصلاح گرمایی در دمای 170 درجه سانتی‌گراد، اصلاح شیمیایی با گلوتارآلدئید و فشرده­سازی در 3 سطح 10، 25 و 40 درصد در زمان پرس 2 ساعت انجام شد. دانسیته­ چوب اصلاح گرمایی و شیمیایی شده با افزایش فشردگی از 25 به 40 درصد، به ترتیب 13 و 8 درصد افزایش یافت. بازگشت فنری و جذب رطوبت در اصلاح تلفیقی گرمایی/فشرده­سازی بیشتر از شیمیایی/فشرده­سازی بود. جذب آب و واکشیدگی ضخامت در فشرده­سازی 10 درصد بیشتر از شاهد اصلاح شیمیایی و گرمایی بود، ولیکن با افزایش فشردگی، کاهش معنی­دار یافت. خواص مکانیکی در هر دو اصلاح گرمایی و شیمیایی با افزایش نسبت فشردگی بهبود یافت. بهبود مدول خمشی با افزایش فشردگی در هر دو اصلاح، از فشردگی 25 به 40 درصد، بیش از 10 به 25 درصد بود که در نمونه­های اصلاح گرمایی شده محسوس­تر بود. مقاومت نیز با افزایش فشردگی بهبود یافت، ولیکن نسبت این بهبود در فشردگی 40 درصد کاهش یافت. افزایش فشردگی به بهبود معنی­دار فشار موازی الیاف و سختی نیز انجامید که در نمونه­های اصلاح‌شده با گلوتارآلدئید در مقایسه با گرمایی محسوس­تر بوده است.}, keywords_fa = {فشرده‌سازی,گلوتارآلدئید,اصلاح گرمایی,خواص فیزیکی,خواص مکانیکی}, url = {https://www.ijwp.ir/article_36890.html}, eprint = {https://www.ijwp.ir/article_36890_e4134de1e65686ea74aeaa73794c137b.pdf} }