@article { author = {Amiri, Elmira and Rahmaninia, Mehdi and Khosravani, Amir}, title = {Effect of Chitosan Electrostatic Charge on the Performance of Chitosan-Nanosilica in Recycled Old Corrugated Container Pulp}, journal = {Iranian Journal of Wood and Paper Industries}, volume = {9}, number = {3}, pages = {459-469}, year = {2018}, publisher = {Iranian Scientific Association of Wood and Paper Industries}, issn = {2008-9066}, eissn = {2423-3242}, doi = {}, abstract = {Using chitosan-nanosilica system in papermaking has been considered in researches recently. In present investigation, confirming the performance of this nanoparticle system in producing paperboard from recycled old corrugated container pulp, the electrostatic performance of chitosan polyelectrolyte in process and product properties has been considered. In this respect, pH of pulp suspension, as one of mains factor affecting the chitosan electrostatic charge, was considered. The results indicated that the process properties (drainage and first pass retention) have been experienced better situation affected by chitosan electrostatic charge in neutral and alkaline conditions. It seems that by changing the pulp suspension pH to neutral and alkaline conditions, the chitosan positive electrostatic charge and its solubility would be decreased and in contrast the fibers negative charge would be increased. This condition would probably affect the chitosan polymer connection and deployment status on fibers surface (loop and tail position) which might perform more effective in floc formation and therefore, drainage and retention increment about 37.5 and 36.5% respectively comparing with control sample and 34 and 7% respectively in comparison with acidic condition. Although the mentioned system has been successful in increasing the mechanical strength comparing the control samples, but the electrostatic charge changes in different pH conditions had less positive impact on these properties (except internal bonding strength).}, keywords = {Chitosan,Electrostatic Charge,Process and Mechanical properties,Nanosilica,Recycled Fibers}, title_fa = {تاثیر بار الکتروستاتیکی کایتوزان بر عملکرد سیستم کایتوزان- نانو سیلیکا در خمیرکاغذ بازیافتی کارتن‌های کنگره‌ای کهنه}, abstract_fa = {اخیرا استفاده از سیستم کایتوزان-نانوسیلیکا در کاغذسازی، در تحقیقات مورد توجه قرار گرفته است. در این راستا پژوهش حاضر با تایید نتایج عملکرد این سیستم نانوذره در فرآیند تولید مقوا از خمیرکاغذ بازیافتی کارتن های کنگره ای کهنه، به بررسی عملکرد الکتروستاتیکی پلی الکترولیت کایتوزان در ویژگی های مربوط به فرآیند تولید و کیفیت محصول تولیدی پرداخته است. بر این اساس تغییر pH خمیرکاغذ به عنوان یکی از اصلی ترین عوامل موثر بر بار الکتروستاتیکی کایتوزان در سوسپانسیون خمیرکاغذ درنظر گرفته شد. نتایج نشان داد، ویژگی های فرایندی (آبگیری از ورقه الیاف و ماندگاری نرمه در گذر اول) تحت تاثیر بار الکتروستاتیکی کایتوزان در محیط خنثی و قلیایی وضعیت بهتری داشته اند. به نظر می سد، با تغییر هرچه بیشتر pH سوسپانسیون به سمت خنثی و قلیایی، ازشدت بار مثبت الکتروستاتیکی کایتوزان و انحلال کاسته شده و به عکس بر بار منفی الیاف افزوده می شود. احتمالا این وضعیت بر نحوه اتصال پلیمر کایتوزان روی الیاف (حالت دم و لوپ)- به صورتی که در تشکیل فلاک موثرتر عمل نماید- تاثیر داشته است؛ به طوری که در شرایط خنثی میزان آبگیری و ماندگاری به ترتیب به میزان هرکدام 5/37 و 8/36 درصد نسبت به تیمار شاهد، 34 و 7 درصد نسبت به حالت اسیدی افزایش نشان داده است. همچنین هرچند سیستم مزبور در افزایش ویژگی‌های مقاومتی نسبت به تیمار شاهد کاملا موفقیت آمیز بوده است، اما تغییرات بار الکتروستاتیکی توسط pH بر ویژگی های مقاومتی (جز افزایش در مقاومت پیوند درونی) تاثیر مثبت اندکی داشته است.}, keywords_fa = {کایتوزان,بار الکتروستاتیکی,ویژگیهای فرایندی و مقاومتی,نانوسیلیکا,الیاف بازیافتی}, url = {https://www.ijwp.ir/article_31254.html}, eprint = {https://www.ijwp.ir/article_31254_1ca03b63b1f77816ff429276cc4d2dc2.pdf} }