@article { author = {Salari, Ayoub and faezipour, mahdi and karimi, alinaghi and jonoobi, mahdi and moradpour, payam}, title = {Investigation of the effect of modified poly vinyl acetate on the stress carrying capacity of corner joints in the wood members joined with dowel}, journal = {Iranian Journal of Wood and Paper Industries}, volume = {9}, number = {3}, pages = {323-336}, year = {2018}, publisher = {Iranian Scientific Association of Wood and Paper Industries}, issn = {2008-9066}, eissn = {2423-3242}, doi = {}, abstract = {AbstractThe aim of this study was to determine stress carrying capacity of doweled corner joints in wood members made with modified resin (polyvinyl acetate) and its comparison with unmodified ones. Joint members were out of European silver Fir (Abies alba) and dowels were made from Beech and poplar woods as variables in this study. Diameter of dowel had three levels in size, namely 6, 8 and 10 mm. The experimental joints were tested under diagonal compression loads. Results have shown that stress carrying capacity of tested joints made with modified glue is more than unmodified ones. Maximum stress capacity was observed in the joints of beech which with 10 mm in diameter dowels. Based on the results, the highest strength was belonging to those joints made with beech wood glued with modified resin containing 10 mm dowel. Furthermore, the lowest strength was belonging to poplar joints made with unmodified resins and 6 mm dowels. The improvement can be due to increased viscosity and controlled penetration of the resin into the wood structure and hence better bonding. Concerning the wood species, beech had the highest stress carrying capacity that it can attributed to its higher density. Key words: Stress carrying capacity, wooden dowel, modified PVAc, dowel.}, keywords = {Stress carrying capacity," wooden dowel," modified PVAc,dowel."}, title_fa = {ارزیابی تاثیر اصلاح چسب پلی وینیل استات بر ظرفیت لنگر خمشی اتصال‌ ساخته شده با پین چوبی}, abstract_fa = {چکیده هدف از این پژوهش بررسی تاثیر چسب اصلاح شده‌ی پلی وینیل استات بر ظرفیت لنگر خمشی اتصال‌های ساخته شده از گونه‌های راش صنوبر و نراد بوده است. در این پژوهش ظرفیت لنگر خمشی اتصال‌ با چسب اصلاح شده مورد بررسی قرار گرفته و با چسب اصلاح نشده مقایسه شده است. مواد مورد استفاده در این تحقیق چسب پلی وینیل استات و گونه‌های چوبی راش، صنوبر و نراد بوده است. نتایج نشان داد که بیشترین ظرفیت لنگر خمشی 1/47 نیوتن متر مربوط به اتصال راش با قطر پین 10 میلیمتر و چسب اصلاح شده بوده در حالی که کمترین لنگر خمشی 17/35 نیوتن متر مربوط به اتصال با گونه صنوبر با قطر 6 برای چسب اصلاح نشده بود. اصلاح چسب پلی وینیل استات با نانو سلولز و پلی وینیل الکل تاثیر مطلوبی روی خواص مکانیکی این چسب داشته که اختلاف مقاومت اتصال چسب اصلاح شده با پلی وینیل استات خالص گواه این مطلب است که علت ان می تواند افزایش ویسکوزیته چسب و کنترل میزان نفوذ آن به بافت چوب و بهبود چسبندگی باشد. از بین قطر پین های مورد مطالعه، قطر 10 میلیمتر به واسطه محیط بیشتر و به طبع آن مساحت سطح چسبندگی بیشتر، استحکام بالاتری نسبت به قطرهای 8 و 6 میلیمتر نشان داد. همانطور که قابل پیش بینی بود مقاومت اتصال گونه راش بالاتر از نراد و صنوبر بود، که دلیل اصلی آن را می توان به دانسیته بالاتر این گونه ربط داد.کلمات کلیدیچسب پلی‌وینیل‌استات اصلاح شده، اتصال دوبل با پین چوبی، ظرفیت لنگر خمشی، نانو کریستال سلولز}, keywords_fa = {"چسب پلی‌وینیل‌استات اصلاح شده," اتصال دوبل با پین چوبی,ظرفیت لنگر خمشی," نانو کریستال سلولز"}, url = {https://www.ijwp.ir/article_29992.html}, eprint = {https://www.ijwp.ir/article_29992_e3f80037ade017429f44a1cd99aa3c67.pdf} }