@article { author = {Nikkhah Dafchahi, Mostafa and Saraeyan, Ahmad Reza and Resalati, Hossein and Ghasemian, Ali and Shakeri, Ali Reza}, title = {Production of dissolving pulp from populus deltoides wood utilizing alkaline pre-extraction followed by soda-AQ pulping process}, journal = {Iranian Journal of Wood and Paper Industries}, volume = {9}, number = {2}, pages = {289-298}, year = {2018}, publisher = {Iranian Scientific Association of Wood and Paper Industries}, issn = {2008-9066}, eissn = {2423-3242}, doi = {}, abstract = {Dissolving pulp is used as a raw material to produce numerous cellulosic derivatives like carboxymethyl cellulose, nitrocellulose, viscose, etc. The potential of dissolving pulp production from populus deltoides using alkaline pre-extraction followed by soda-AQ pulping process was investigated across this research. The yield loss of about 15% was achieved in pre-extraction stage through controlling the process parameters, and kappa number of the pulp has been reduced to about 40% with oxygen delignification. The results showed that the alkaline pre-hydrolysis has been affected on increasing the lignin removal rate of fibers. Using alkali catalyst in pre-hydrolysis liquor led to increasing a-cellulose and decreasing brightness level of the dissolving pulp. The a-cellulose and brightness level of dissolving pulp have been upgraded by utilizing higher levels of kappa factor in D0ED1 bleaching. Therefore, the produced dissolving pulp employing 0.45 kappa factor in D0 stage due to its higher a-cellulose, brightness and purity has been more favorable in this research work.}, keywords = {Dissolving pulp,alkali-catalyzed pre-hydrolysis,soda-AQ pulp,Poplar,Oxygen delignification}, title_fa = {تولید خمیر حل‌شونده از صنوبر دلتوئیدس با استفاده از پیش‌استخراج قلیایی و فرآیند سودا-آنتراکینون}, abstract_fa = {خمیر حل‌شونده به عنوان ماده اولیه‌ در تولید مشتقات سلولزی فراوانی نظیر کربوکسی متیل سلولز، نیتروسلولز، ویسکوز و ... استفاده می-شود. در این تحقیق، قابلیت تولید خمیر حل‌شونده از صنوبر دلتوئیدس با استفاده از پیش‌استخراج قلیایی و فرآیند سودا-آنتراکینون مورد بررسی قرار گرفت. با کنترل پارامتر‌های فرآیندی امکان دست‌یابی به افت بازده حدود 15% در پیش‌استخراج و کاهش 40 درصدی عدد کاپا توسط لیگنین‌زدایی با اکسیژن فراهم شد. نتایج نشان داد که پیش‌استخراج قلیایی سبب بهبود نرخ لیگنین‌زدایی الیاف می‌شود. با استفاده از کاتالیزور قلیایی در مایع پیش‌استخراج، مقدار آلفا-سلولز خمیر حل‌شونده‌ افزایش و درجه روشنی آن کاهش یافت. افزایش فاکتور کاپای مصرفی در رنگ‌بری با توالی رنگ‌بری D0ED1 سبب ارتقای سطح آلفا-سلولز و درجه روشنی خمیر حل‌شونده حاصل شد. لذا در این تحقیق، خمیر حل‌شونده‌ای حاصل از بکارگیری فاکتور کاپای 45/0 در مرحله D0 به علت آلفا-سلولز، درجه روشنی و خلوص بالاتر دارای مطلوبیت بیشتری بوده است.}, keywords_fa = {خمیر حل‌شونده,پیش‌استخراج شده با کاتالیزور قلیایی,خمیر سودا-آنتراکینون,صنوبر,لیگنین‌زدایی با اکسیژن}, url = {https://www.ijwp.ir/article_29901.html}, eprint = {https://www.ijwp.ir/article_29901_4e1e4ee259f2bfe9f0b51999e3675c49.pdf} }