@article { author = {Hasanjanzadeh, Hadi and Hedjazi, Sahab and Hamzeh, Yahya and Abdolkhani, Ali}, title = {The potential of replacing the starch with soda and formacell lignins in surface sizing and evaluation of physical and mechanical properties of produced liner papers}, journal = {Iranian Journal of Wood and Paper Industries}, volume = {12}, number = {4}, pages = {453-464}, year = {2022}, publisher = {Iranian Scientific Association of Wood and Paper Industries}, issn = {2008-9066}, eissn = {2423-3242}, doi = {}, abstract = {In this research, the physical and mechanical properties of the surface sizing liner papers with starch formulation with soda and formacell lignins have been investigated. The soda and formacell lignins from the remaining black liquor were separated and then was replaced with anionic starch in 30, 50, 70, and 100 ratios. In addition, 0.3 g/m2 alum as a cationic agent was charged to the suspension. The results of this study show that even by 100 % replacing starch with both types of lignins, the physical characteristics (air resistance, cobb, coarseness) and mechanical properties of surface-sized paper have been improved compared with control paper. According to the results, 50/50 lignin/starch ratio improved the mechanical and physical properties better and was determined as optimum level. For soda lignin without alum, tensile (36.21 N.m/g) and burst (1.58 Kpa.m2/g) indices increased by 55 and 35 % respectively, compared with the control in the optimum level. For formacell, lignin/starch in 50/50 ratio without alum, the tensile and burst indices were increased 47 and 27% respectively, compared with the control sample. According to the results, it is possible to replace at least 50% of starch with the above-mentioned lignins, which will play an important role in food security and add value for pulp mills.}, keywords = {soda lignin,Formacell lignin,Starch,Surface sizing,Liner}, title_fa = {پتانسیل جایگزینی نشاسته با لیگنین‌های سودا و فرماسل در آهاردهی سطحی و ارزیابی ویژگی‌های فیزیکی و مکانیکی کاغذهای لاینر تولیدی}, abstract_fa = {در این تحقیق ویژگی­های فیزیکی و مکانیکی کاغذهای لاینر آهاردهی شده سطحی، با ترکیب فرمولاسیون نشاسته با لیگنین­های سودا و فرماسل موردبررسی قرارگرفته است لیگنین­های سودا و فرماسل از مایع سیاه باقی‌مانده از پخت­های مربوطه جداسازی شده و سپس با مقادیر 30، 50، 70 و 100 درصد با نشاسته آنیونی جایگزین گردید. همچنین به‌صورت مجزا به مقدار 3/0 گرم بر مترمربع آلوم به‌عنوان عامل کاتیونی به سوسپانسیون آهار اضافه گردید. نتایج این تحقیق نشان می‌دهد که با جایگزینی هر دو نوع لیگنین با نشاسته، حتی به‌صورت صد در صد خواص فیزیکی) مقاومت به نفوذ هوا، جذب آب کب، زبری) و ویژگی‌های مکانیکی کاغذهای آهار سطحی شده نسبت به کاغذ شاهد بهبودیافته است. با توجه به نتایج ترکیب با نسبت 50 به 50 لیگنین با نشاسته ازنظر بهبود ویژگی‌های مکانیکی و فیزیکی عملکرد بهتری داشته است. برای لیگنین سودا بدون آلوم شاخص کشش (N.m/g 21/36) و ترکیدگی (Kpa.m2/g 58/1) نسبت به نمونه شاهد به ترتیب 55 درصد و 35 درصد افزایش داشته است. در خصوص لیگنین فرماسل بدون آلوم با نسبت 50 به 50 با نشاسته، شاخص کشش47 درصد و شاخص ترکیدگی 27 درصد بهبودیافته است. با توجه به نتایج امکان جایگزینی حداقل 50 درصد نشاسته با لیگنین های فوق‌الذکر وجود دارد که این امر نقش مهمی را در امنیت غذایی و ایجاد ارزش‌افزوده برای کارخانه‌های خمیرکاغذ خواهد داشت.}, keywords_fa = {لیگنین سودا,لیگنین فرماسل,نشاسته,آهارزنی سطحی,لاینر}, url = {https://www.ijwp.ir/article_251251.html}, eprint = {https://www.ijwp.ir/article_251251_623ca663867aad1de92078d1a28b3b38.pdf} }