@article { author = {Asadi, Ali and Farahani, Mohammad Reza and salehpour, shoboo and Yousefi, Hossein}, title = {Investigation of the effect of nano-silica deposition on cellulose fibers , the mechanical properties of autoclaved cement composites in industrial scale}, journal = {Iranian Journal of Wood and Paper Industries}, volume = {12}, number = {3}, pages = {419-428}, year = {2021}, publisher = {Iranian Scientific Association of Wood and Paper Industries}, issn = {2008-9066}, eissn = {2423-3242}, doi = {}, abstract = {In this study, the surface modification of cellulose fibers and its effect on the mechanical properties of fiber-cement composite was evaluated. The fiber modification was conducted through deposition of nano-silica at two levels 3 and 5 wt % (based on dry weight of cement) on the surface. The fibers and composites were characterized by emission scanning electron microscopy (FE-SEM), energy dispersive X-ray spectrum (EDS), Fourier transform infrared spectroscopy (FTIR) and X-ray diffraction (XRD). Also, mechanical in wet and dry state of cement fiber composites was investigated. FE-SEM and EDS analysis of the modified fibers showed that the nano-silica deposited on the fiber surface, as observed by the increase of the Si peak in the EDS measurement, which proved the effective modification of cellulose fibers with well dispersed nano-silica on the fiber surface. The reaction of the hydroxyl groups of the cellulose fibers and chemical bonding between cellulose and silica was formed after superficial modification examined by FT-IR analysis. The crystallinity index of the fibers was reduced 15%. The mechanical results showed that the presence of nano-silica treated fibers in the matrix increased the modulus of rupture (MOR) in wet and dry states.}, keywords = {Composite,nano-silica,Cement,modified cellulose fiber,Mechanical properties}, title_fa = {بررسی تأثیر رسوب نانوسیلیس روی سطح الیاف سلولزی و خواص مکانیکی چندسازه-های سیمانی اتوکلاو شده در مقیاس صنعتی}, abstract_fa = {در این تحقیق اصلاح سطح الیاف سلولزی و تأتیر آن بر روی خواص مکانیکی چندسازه‌های الیاف سیمانی مورد ارزیابی قرار گرفت. اصلاح سطح سلولزی از طریق رسوب گذاری نانوسیلیس در دو سطح 3 و 5 درصد (براساس وزن خشک سیمان) انجام شد. الیاف به وسیله میکروسکوپ الکترونی روبشی میدانی، اسپکتروسکوپی پراش انرژی، طیف-سنجی مادون قرمز و پـراش پرتـو ایکـس مورد تجزیه و تحلیل قرار گرفتند. همچنین خواص مکانیکی چندسازه‌ها در حالت مرطوب و خشک بررسی شد. تجزیه و تحلیل میکروسکوپ الکترونی روبشی میدانی و اسپکتروسکوپی پراش انرژی نشان داد، نانوسیلیس روی سطح الیاف به خوبی رسوب کرده‌اند. کاهش گروه‌‌‌های هیدروکسیل و پیوند شیمیایی بین سلولز و سیلیس پس از اصلاح توسط طیف‌‌سنجی مادون قرمز تایید شد. همچنین شاخص بلورینگی الیاف 15درصد کاهش یافت. نتایج مکانیکی نشان داد، الیاف سلولزی اصلاح شده در ماتریس موجـب افـزایش مدول گسیختگی چندسازه‌ها در هر دو حالت شده است. کلمات چکیدی: چندسازه، نانو سیلیس، سیمان، اصلاح الیاف سلولزی، خواص مکانیکی}, keywords_fa = {چندسازه,نانو سیلیس,سیمان,اصلاح الیاف سلولزی,خواص مکانیکی}, url = {https://www.ijwp.ir/article_248510.html}, eprint = {https://www.ijwp.ir/article_248510_5fc148b5c6e3478f3818d3cda0def415.pdf} }