@article { author = {Younesi-Kordkheili, Hamed}, title = {The Use of Maleated Lignin based Polyacid as Catalyst in Urea-Lignin-Glyoxal Wood Adhesive}, journal = {Iranian Journal of Wood and Paper Industries}, volume = {12}, number = {3}, pages = {351-361}, year = {2021}, publisher = {Iranian Scientific Association of Wood and Paper Industries}, issn = {2008-9066}, eissn = {2423-3242}, doi = {}, abstract = {Nowadays, finding a catalyst with high quality and eco-friendly thermoset resins is very valuable. This study aimed to investigate the effect of maleated lignin-based polyacid (MA-PL) as a catalyst in urea-lignin-glyoxal (ULG) resin. For this reason, a phenolate reaction was done to increase the hydroxyl groups of lignin. Then the modified lignin was reacted with maleic anhydride to obtain polyacid based on maleated lignin. In the next step, different content of MA-PL catalyst (0, 1, 2, and 3 wt%) was added to ULG resin and prepared resins were used in particleboard panels production. Different properties of synthesized resins and panels were measured according to standard methods and were compared with those using ammonium chloride as the control sample. In addition, the thermal behavior of resin before and after adding catalyst was analyzed with Differential Scanning Calorimetry (DSC). Generally, the results of this research indicated that polyacids based lignin could be used as a suitable catalyst for ULG resin. Physical and mechanical test analysis indicated that the addition of catalyst from zero to 3 wt% continuously decrease pH and gelation time. DSC analysis showed that adding extra MA-PL reduces the curing temperature of resin compared with ammonium chloride. Based on the obtained results from manufactured panels, mechanical strength (MOE, MOR, and IB strength) and dimensional stability of the panels was improved by adding 3 wt% MA-PL.}, keywords = {Polyacid,catalyst,wood adhesive,Physical and mechanical properties,Lignin}, title_fa = {استفاده از پلی‌اسید حاصل از لیگنین مالئیک‌دار شده به‌عنوان کاتالیزور در چسب اوره- لیگنین- گلی‌اکسال}, abstract_fa = {در حال حاضر یافتن کاتالیزور باکیفیت بالا و دوستدار محیط‌زیست برای چسب­های گرماسخت از اهمیت بالایی برخوردار می­باشد. هدف از این تحقیق، بررسی تأثیر استفاده از پلی­اسید حاصل از لیگنین مالئیک­دار شده به‌عنوان کاتالیزور در چسب اوره- لیگنین- گلی­اکسال می­باشد. به همین منظور در مرحله اول، واکنش فنولاسیون لیگنین به‌منظور افزایش گروه­های هیدروکسیل انجام شد. سپس لیگنین اصلاح شده با مالئیک انیدرید واکنش داده شد تا پلی­اسید بر پایه لیگنین مالئیک­دار شده حاصل گردد. در مرحله بعد، مقادیر متفاوت کاتالیزور تولیدی (0،1،2 و 3 درصد) به چسب اوره- لیگنین- گلی­اکسال اضافه گردید و چسب تهیه‌شده در ساخت تخته خرده چوب استفاده شد. ویژگی­های مختلف چسب و تخته تولیدی مطابق روش­های استاندارد اندازه‌گیری شد و با تخته‌هایی که در آنها از کاتالیزور کلرید آمونیوم استفاده‌شده بود (به‌عنوان نمونه شاهد) مقایسه گردید. همچنین رفتار حرارتی چسب قبل و بعد از افزودن کاتالیزور با استفاده از دستگاه آنالیز گرماسنج روبشی تفاضلی (DSC) موردبررسی قرار گرفت. به‌طورکلی نتایج این تحقیق نشان داد که پلی اسید حاصل از لیگنین مالئیک­دار شده می­تواند به‌عنوان کاتالیزور مؤثر برای چسب اوره- لیگنین- گلی‌اکسال مورداستفاده قرار گیرد. نتایج بررسی­های فیزیکی شیمیایی چسب نشان داد که با افزایش میزان کاتالیست تا 3 درصد، میزان pH و زمان ژله­ای شدن چسب به‌طور پیوسته کاهش می‌یابد. آنالیز DSC نشان داد که افزودن کاتالیست پلی اسید موجب کاهش بیشتر دمای انعقاد چسب در مقایسه با کلرید آمونیوم می‌گردد. بر اساس نتایج به‌دست‌آمده از بررسی‌های فیزیکی و مکانیکی تخته‌های تولیدی، افزودن 3 درصد پلی اسید بر پایه لیگنین موجب بهبود معنی­دار مقاومت­های مکانیکی (چسبندگی داخلی، مدول‌الاستیسته و مقاومت خمشی) و پایداری ابعاد تخته خرده چوب می­گردد.}, keywords_fa = {پلی اسید,کاتالیزور,چسب چوب,ویژگی‌های فیزیکی و مکانیکی,لیگنین}, url = {https://www.ijwp.ir/article_248505.html}, eprint = {https://www.ijwp.ir/article_248505_df21038fef2565af8c824b36dae6a6e4.pdf} }