@article { author = {Gholamiyan, Hadi and tarmian, asghar and pourtahmasi, kambiz}, title = {Microscopic investigation on the effects of wood surface modification with sol-gel method on the quality of polyurethane and alkyd coatings}, journal = {Iranian Journal of Wood and Paper Industries}, volume = {8}, number = {4}, pages = {509-520}, year = {2018}, publisher = {Iranian Scientific Association of Wood and Paper Industries}, issn = {2008-9066}, eissn = {2423-3242}, doi = {}, abstract = {In this research, the effects of poplar wood surface modification using sol-gel method on the quality of alkyd and polyurethane coatings for outdoor application were studied. For this purpose, the wood surface was modified with Tetraethoxy‌silane (T) sol-gel material. Then, solvent-borne alkyd (AS) and solvent-borne polyurethane (PS) coatings were applied. The quality of coatings was evaluated by microscopic observation using fluorescence, confocal laser scanning microscopy (CLSM) and EDX-SEM. The results of EDX showed a noticeable silicon peak in the sol-gel-treated specimens. The results of fluorescence microscopic studies showed that alkyd and polyurethane coatings only present in the cell lumens but the sol-gel penetrates into the cell walls. Laser microscope results showed that the modification of wood surface with sol-gel process reduces the roughness of alkyd and polyurethane coatings caused by weathering.}, keywords = {Coating,Sol-gel,alkyd,Polyurethane,Weathering}, title_fa = {بررسی میکروسکوپی اثرات اصلاح سطح چوب با فرایند سل‌ژل بر کیفیت پوشش‌دهی آن با پوشش‌های آلکیدی و پلی‌اورتان}, abstract_fa = {در این تحقیق با استفاده از مطالعات میکروسکوپی اثرات اصلاح سطح چوب صنوبر با فرایند سل‌ژل بر کیفیت پوشش‌دهی آن با پوشش های آلکیدی و پلی‌اورتان برای کاربرد در فضای باز بررسی شد. برای این منظور از پوشش سل‌ژل تترا اتوکسی سیلان استفاده شد و پس از خشک شدن آن، پوشش‌های آلکیدی و پلی‌اورتان با دستگاه فیلم‌کش اعمال شد. کیفیت پوشش‌دهی با استفاده از میکروسکوپ‌های فلوئورسنت، لیزری (CLSM)، الکترونی SEM) (EDX- مورد بررسی قرار گرفت. نتایج مطالعات EDX حاکی از حضور گروه‌های سیلانی در نمونه اصلاح شده با فرایند سل‌ژل بود. نتایج مطالعات میکروسکوپی فلوئورسنت نشان داد که بر خلاف پوشش‌های آلکیدی و پلی‌اورتان که فقط حفرات سلولی را پر کرده بودند، پوشش‌ سل‌ژل بیشتر در دیوار‌های سلولی نفوذ کرده است. مطالعات میکروسکوپ لیزری نشان داد که در اثر آمایش سطح چوب با فرایند سل‌ژل از میزان زبری پوشش‌های آلکیدی و پلی‌اورتان در اثر هوازدگی کاسته می‌شود.}, keywords_fa = {پوشش دهی,آلکیدی,پلی اورتان,سل ژل,هوازدگی}, url = {https://www.ijwp.ir/article_24426.html}, eprint = {https://www.ijwp.ir/article_24426_266f29e432ed78d78338ad2f56e8c76e.pdf} }