@article { author = {salehpour, shobo and jonoobi, mahdi and Oksman, kristina and ahmadzadeh, masoud and Khanali, majid}, title = {Study of Biodegradability and Mechanical Properties of Polyvinyl Alcohol (PVA) Reinforced Celloluse Nanofiber (CNF)}, journal = {Iranian Journal of Wood and Paper Industries}, volume = {8}, number = {4}, pages = {497-508}, year = {2018}, publisher = {Iranian Scientific Association of Wood and Paper Industries}, issn = {2008-9066}, eissn = {2423-3242}, doi = {}, abstract = {The aim of this study was to improve the properties of polyvinyl alcohol (PVA) by using cellulose nanofibers (CNF) as a reinforcement. In order to improve the compatibility and miscibility with PVA matrix, freeze drying method was applied. The nanocomposites based on PVA with values 5, 10, 20 and 30wt% of CNF were prepared by freeze-drying and the effect of CNF addition on the mechanical and dynamical mechanical properties, moisture sorption, barrier and biodegradability of the nanocomposites was studied. The tensile strength and elastic modulus of PVA films were improved by the addition of CNF. The nanocomposite with 10wt% nano-fibers had the highest tensile strength and lowest modulus of elasticity and the elongation at break. The results indicated that the storage modulus (E′) of PVA was considerably improved with the introduction of CNF into - polymer matrix. The water vapor permeability decreased from 7.31 to 2.1×10-7 g/m. h. Pa as the CNF percentage increased from 0 to 30%. Also the presence of cellulose nanofibers improved moisture sorption of polyvinyl alcohol. The weight loss of PVA films increased 60% with addition of 30wt% CNF after 90 days of exposure in soil}, keywords = {Poly (vinyl alcohol),Cellulose Nanofibers,Freeze drying,Mechanical properties,Biodegradability}, title_fa = {بررسی خواص زیست تخریب پذیری و مکانیکی پلی وینیل الکل تقویت شده با نانو الیاف سلولزی}, abstract_fa = {هدف از این مطالعه، تقویت خواص پلی وینیل الکل با استفاده از نانو الیاف سلولزی می‌باشد. به منظور بهبود سازگاری و قابلیت اختلاط نانو الیاف سلولزی با پلیمر، از روش خشک کردن انجمادی استفاده شد. فیلم‌های نانو چندسازه برپایه پلی وینیل الکل با مقادیر 5، 10، 20 و 30 درصد وزنی نانو الیاف سلولزی با استفاده از فریز درایر تهیه شدند و اثرات نانو الیاف سلولزی بر خصوصیات مکانیکی، دینامیکی-مکانیکی، جذب آب، بازندارگی و زیست تخریب‌پذیری نانو چند سازه‌ها مورد بررسی قرار گرفت. استحکام کششی و مدول الاستیسیته فیلم PVA به طور قابل توجهی با افزودن نانو الیاف سلولزی بهبود یافت. در این رابطه نانو چندسازه تهیه شده از 10 درصد نانو الیاف سلولزی، دارای بیشترین مقاومت کششی و مدول الاستیسیته بودند. همچنین نتایج نشان داد، مدول ذخیره نانو چندسازه‌ها با افزودن نانو الیاف سلولزی به درون ماتریس پلیمری به طور قابل ملاحظه ای بهبود یافت. با افزایش مقدار نانو الیاف سلولزی از صفر به 30 درصد نفوذپذیری به بخارآب از 31/7 به g/m.h.pa×107-×1/2 کاهش یافت. همچنین حضور نانو الیاف سلولزی موجب بهبود خاصیت جذب آب پلی وینیل الکل شد. کاهش وزن فیلم‌های پلی وینیل الکل با افزودن 30 درصد نانو الیاف سلولزی پس از 90 روز قرار گرفتن در محیط خاک 60 درصد افزایش یافت.}, keywords_fa = {پلی وینیل الکل,نانو الیاف سلولزی,خشک کردن انجمادی,ویزگیهای مکانیکی,زیست تخریب پذیری}, url = {https://www.ijwp.ir/article_23243.html}, eprint = {https://www.ijwp.ir/article_23243_3a1f4d655c586ba85fddfba7528438e0.pdf} }