@article { author = {Ghaffarzadeh Mollabashi, omid and Sharari, Mearaj and Alebrahim, mohammadtaghi}, title = {Investigation of pulping and paper making potential of weeds}, journal = {Iranian Journal of Wood and Paper Industries}, volume = {8}, number = {2}, pages = {241-251}, year = {2017}, publisher = {Iranian Scientific Association of Wood and Paper Industries}, issn = {2008-9066}, eissn = {2423-3242}, doi = {}, abstract = {Increasing use of wood products accompanying with resource constraint has revealed the importance of nonwood based material. In this study, pulping and papermaking potential of three varieties of weeds including Xanthium spinosum, Carthamus tinctorius and Cyperus papyrus have been considered. At first, chemical components of the samples i.e. cellulose, lignin and extractives have been measured following TAPPI standard test methods. Afterwards, pulping process based as soda and Kraft has been carried out and the pulp properties i.e. screen yield and reject, kappa number, caliper, bust index, tear index, brightness have been considered. According to the results, the amount cellulose, lignin and extractives have been measured for the Xanthium spinosum %38.15, %13.5 and 4.72, respectively. Theses parameters have been estimated about %38.25, %10.3 and % 2.95 for Carthamus tinctorius and %38.8, %19.2 and 4.4 in case of papyrus. The yield of soda and Kraft pulp of the papyrus was more than Xanthium spinosum and Carthamus tinctorius. Among all treatments, the highest screen yield related to soda pulping of Cyperus papyrus by %39.8 which has been obtained by 175 centigrade as a maximum temperature, L/W: 6/1, active alkaline: %30 and 90 minutes as the time at temperature. The lowest and highest amounts of the tear index were related to soda pulp sample of the Carthamus tinctorius and Kraft pulp sample of Xanthium spinosum by 2.49 and 8.1, respectively. In addition, the lowest and highest amounts of the bursting index were related to soda pulp sample of the Cyperus papyrus and Kraft pulp sample of Xanthium spinosum by 0.61and 2.48, respectively. Meanwhile, soda pulp sample of the Cyperus papyrus showed the highest amount of brightness with %45 ISO.}, keywords = {Raw material shortage,Yield,kappa number,burst,brightness}, title_fa = {بررسی امکان تولید خمیر و کاغذ از علف‌های هرز}, abstract_fa = {افزایش روزافزون مصرف فراورده‌های کاغذی از یک طرف و محدودیت منابع چوبی از طرف دیگر، اهمیت توجه به منابع لیگنوسلولزی غیرچوبی را بیش از پیش آشکار می‌سازد. در این بین گونه‌های علفی نظیر انواع علف هرز و گیاهان خودرو می‌توانند مورد ارزیابی قرار بگیرند. در این تحقیق، امکان تولید خمیرکاغذ و کاغذ از سه گونه گیاهی بومی منطقه اردبیل با نام‌های تاتاری، توق و پاپیروس مورد آزمون قرار گرفتند. ابتدا مقدار ترکیبات شیمیایی آنالیز و سپس پارمترهای خمیر و کاغذ حاصل از گونه‌ها اعم از میزان بازده، وازد، عدد کاپا، درجه روشنی، ضخامت، مقاومت به عبور هوا و شاخص‌های ترکیدگی، پارگی، تاه‌خوردگی ارزیابی گردیدند. بر اساس نتایج تحقیق، میانگین مقادیر سلولز، لیگنین و مواد استخراجی برای گونه توق به ترتیب 15/38 ، 5/13 و 72/4 و برای گونه ی تاتاری به ترتیب 25/38 ، 3/10 و 95/2 وبرای گونه پاپیروس به ترتیب 8/38 ،2/19 و 4/4 اندازه‌گیری شد. بازده خمیر سودا و کرافت برای گونه پاپیروس بیشتر از گونه های توق و تاتاری بوده و در محدوده خمیر سودا حاصل از کاه گندم قرار دارد. با این وجود، مقادیر بازده برای هر سه گونه کمتر از خمیرهای سودا حاصل از باگاس و گونه‌های پهن برگ است. ارزیابی شاخص‌های مقاومتی، گونه های پاپیروس و تاتاری در محدوده‌ خمیر سودا حاصل از کاه گندم و گونه توق را در محدوده گونه‌های پهن برگ قرار می‌دهد. در نهایت، با توجه به کمبود مواد لیگنوسلولزی از یک طرف و حجم قابل توجه گونه‌های علفی که کاربرد خاصی برای این گونه ها تعریف نشده است، می توان با استحصال و کاربرد این گونه‌ها، بخشی از کمبود مواد اولیه را جبران نموده و با برداشت صنعتی این گونه‌ها، آلودگی زیست محیطی ناشی از آن‌ها را کاهش داد.}, keywords_fa = {کمبود منابع لیگنوسلولزی,بازده,کاپا,شاخص ترکیدگی,درجه روشنی}, url = {https://www.ijwp.ir/article_23167.html}, eprint = {https://www.ijwp.ir/article_23167_2a84e3e18f350c8690ead9f35ebbfc42.pdf} }