@article { author = {Ghahri, Saman and mohebby, behbood and Pizzi, Antonio and Mirshokraie, Ahmad and Mansouri, Hamidreza}, title = {Use of Soy Flour-Tannin Adhesive for Particleboard (Dry Condition)}, journal = {Iranian Journal of Wood and Paper Industries}, volume = {8}, number = {1}, pages = {131-143}, year = {2017}, publisher = {Iranian Scientific Association of Wood and Paper Industries}, issn = {2008-9066}, eissn = {2423-3242}, doi = {}, abstract = {In this research soy flour- tannin adhesives were used in particleboard preparation, successfully. Tow type of different tannins Mimosa (as condensed tannin) and Chestnut (as hydrolysable tannins) were used for soy resin modification. For this purpose, mimosa and chestnut tannin were added to soy adhesive with 5, 10 and 15 percent based on dry weight of soy flour. 9 percent Glyoxal was used based on dry weight of tannin for accelerate tannin reaction’s with soyflour components. Prepared soy-tannin adhesives were used in particle board manufacturing with 350×300×14 mm3 dimansion and 0.7 g/cm3 nominal density. Results of viscosity measurment showed that addition of each of tannins decreased visocosity of soy adhesive. In this study, result of thermo-mechanical analyze indicated that chestnut cloud improve adhesion behavior of soy adhesive better than mimosa. Also, Using of tannins in soy adhesive composition increase internal bonding and bending properties in manufactured particleboards.}, keywords = {soy flour adhesive,Tannin,thermo-mechanical analysis,internal bonding,Particleboard}, title_fa = {استفاده از چسب آرد سویا- تانن در ساخت تخته خرده چوب (شرایط خشک)}, abstract_fa = {در این پژوهش چسب آرد سویا- تانن بطور موفقیت آمیزی در ساخت تخته خرده چوب مورد استفاد قرار گرفت. برای اصلاح ویژگی های چسب سویا از دو نوع تانن متفاوت میموزا (تانن متراکم) و شاه بلوط (هیدرولیز شدنی) استفاده شد. برای این منظور هریک از تانن-ها در مقادیر 5، 10 و 15 درصد بر اساس وزن خشک آرد سویا به چسب سویا افزوده شد و از تسریع کننده گلی‌اکسال برای تحریک واکنش پذیری تانن ها استفاده شد. چسب سویا-تانن آماده شده در ساخته تخته خرده چوب‌هایی با ابعاد 14‌×300‌×350 میلیمتر مکعب با دانسیته ظاهری 7/0 گرم بر سانتی مترمکعب استفاده شد. نتایج آزمون گرانروی نشان داد که افزودن هریک از تانن ها سبب کاهش محسوس گرانروی چسب سویا می‌شود. نتایج آزمون ترمومکانیکی چسب ها نیز نشان داند که تانن شاه بلوط در ترکیب چسب سویای مورد استفاده در این تحقیق عملکرد بهتری در ارتقاء رفتار چسبی چسب سویا داشت. همچنین کاربرد تانن ها در ترکیب چسب سویا سبب افزایش چسبندگی داخلی و خواص خمشی تخته خرده چوب‌های ساخته شده گردید.}, keywords_fa = {چسب آرد سویا,تانن,آزمون ترمومکانیکی,چسبندگی داخلی,تخته خرده چوب}, url = {https://www.ijwp.ir/article_22086.html}, eprint = {https://www.ijwp.ir/article_22086_b78308d58d40fefe15eef40816bb3722.pdf} }