@article { author = {tarmian, asghar}, title = {Measurement of Fiber Saturation Point of Wood Using Differential Scanning Calorimetry: Measurement Fundamentals and Experimental Results}, journal = {Iranian Journal of Wood and Paper Industries}, volume = {7}, number = {4}, pages = {615-623}, year = {2017}, publisher = {Iranian Scientific Association of Wood and Paper Industries}, issn = {2008-9066}, eissn = {2423-3242}, doi = {}, abstract = {In this research, the measurement fundamentals of fiber saturation point (FSP) using differential scanning calorimetry (DSC) method were explained. This method is based on the assumption that free water is frozen but bound water remains unfrozen in low temperatures. Thus, the FSP can be calculated by measuring the enthalpy of melting of frozen wet samples. This method measures the amount of energy absorbed or released by a sample when it is heated or cooled. Results showed that the DSC method may yield a higher FSP value compared to the widely accepted value of 30%, depending on the wood species. Both thermal and chemical (acetylation) modification methods reduced the FSP but in the acetylation method, there was no linear correlation between the weight gain percentage (WPG) and FSP.}, keywords = {Fiber saturation point (FSP),Differential scanning calorimetry (DSC),Thermal modification,Acetylation}, title_fa = {اندازه گیری رطوبت اشباع فیبر چوب با استفاده از روش گرماسنجی روبشی تفاضلی: اصول اندازه گیری و نتایج آزمایشگاهی}, abstract_fa = {در این تحقیق، به اصول اندازه‌گیری رطوبت اشباع فیبر (FSP) چوب با استفاده از گرماسنجی روبشی تفاضلی (DSC) پرداخته شد و نتایج آزمایشگاهی در مورد انواع گونه‌های چوبی و چوب‌های اصلاح شده ارائه شد. این روش اندازه‌گیری بر این تئوری استوار است که آب آزاد موجود در حفره‌های سلولی در اثر کاهش دما یخ‌زده ولی آب پیوندی یخ نمی‌زند. بنابراین، با استفاده از اندازه‌گیری آنتالپی ذوب چوب خیس منجمد شده می‌توان میزانFSP را تعیین کرد. در این شیوه میزان جذب یا آزاد شدن انرژی توسط نمونه اندازه‌گیری می-شود، هنگامی که حرارت دیده یا خنک می‌شود. نتایج نشان داد که این روش اندازه‌گیری بسته به گونه چوبی ممکن است به میزان FSP بیشتر از 30 درصد منجر شود. هر دو روش اصلاح حرارتی و استیلاسیون موجب کاهش FSP چوب شدند ولی در فرایند استیلاسیون همبستگی خطی بین درصد افزایش وزن (WPG) نمونه و کاهش FSP وجود نداشت.}, keywords_fa = {رطوبت اشباع فیبر (FSP),گرماسنجی روبشی تفاضلی (DSC),اصلاح حرارتی,استیلاسیون}, url = {https://www.ijwp.ir/article_20362.html}, eprint = {https://www.ijwp.ir/article_20362_0f8ba232772aa17a6054acddc25477a4.pdf} }