@article { author = {shahraki, afsaneh and nosrati sheshkel, babak and mohebi gargari, rahim and abdouss, majid}, title = {Investigation adding of Nano clay particles and compatibilizer on the properties of composite made of polypropylene- Haloxylon wood flour}, journal = {Iranian Journal of Wood and Paper Industries}, volume = {7}, number = {3}, pages = {335-348}, year = {2016}, publisher = {Iranian Scientific Association of Wood and Paper Industries}, issn = {2008-9066}, eissn = {2423-3242}, doi = {}, abstract = {This study, with aim of investigation the effect of Nano clay particles and amount of compatibilizer on the physical and mechanical properties of wood-plastic composites from the polypropylene- Haloxylon wood flour was done. For this purpose, Haloxylon wood flour with 50% weight ratio with polypropylene were mixed. Maleic anhydride modified polypropylene maple to compatibilizer at two levels and Nano clay at three levels to filler were used. Mixed process of materials in extruding machine was done and test specimens were fabricated by using the injection molding machine. Then, the mechanical tests include bending, tension and impact and physical tests include water absorption and thickness swelling according to the ASTM standards was done on the samples. For investigation to how operation of compatibilizer from Fourier Transfer Infrared spectroscopy (FTIR) was used. Morphological study of Nano composites with X-ray diffraction (XRD) and scanning electron microscopy (SEM) was done. The result showed that with addition of the amount of Nano clay particles to 4 percent, physical and mechanical properties were improved, but impact strength decreased. Also by adding the compatibilizer, physical and mechanical properties were improved. The results of Infrared spectroscopy showed that the amount of hydroxyl groups (OH) Due to linkage with Maleic Anhydride and the formation of ester groups decreased with adding the compatibilizer. Also, investigation the morphology of Nano composite by X-ray diffraction showed that the distribution of clay nanoparticles in polymeric matrix was intercalation and with adding of the amount Nano clay the distance between layers increases. The results of scanning electron microscopy was also showed improvement in the interface between the fibers and the polymer matrix with adding the compatibilizer.}, keywords = {Maleic Anhydride Polypropylene,Haloxylon Wood,Mechanical and physical properties,Nano-Clay Particles,Wood-Plastic Composite}, title_fa = {بررسی افزودن نانو ذرات رس و سازگارکننده بر خواص چندسازه حاصل از آرد چوب تاغ (Haloxlon)/ پلی‌پروپیلن}, abstract_fa = {این تحقیق، با هدف بررسی تأثیر نانو ذرات رس و مقدار ماده سازگار کننده روی ویژگی‌های فیزیکی و مکانیکی چندسازه چوب پلاستیک حاصل از آرد چوب تاغ/ پلی‌پروپیلن انجام گردید. بدین منظور، آرد چوب تاغ با نسبت وزنی 50 درصد با پلی‌پروپیلن مخلوط گردید. مالئیک انیدرید پلی‌پروپیلنی به‌عنوان سازگار کننده در دو سطح 0 و 3 درصد و ذرات نانو رس در سه سطح 0، 2 و 4 درصد به‌عنوان پرکننده مورداستفاده قرار گرفتند. فرآیند اختلاط مواد در داخل دستگاه اکسترودر انجام شد و نمونه‌های آزمونی با استفاده از دستگاه قالب‌گیری تزریقی ساخته شدند. سپس آزمون‌های مکانیکی شامل خمش، کشش و ضربه و آزمون‌های فیزیکی شامل جذب آب و واکشیدگی ضخامت مطابق با استانداردهای ASTM بر روی نمونه‌ها انجام گرفت. جهت بررسی نحوه عملکرد ماده سازگار کننده از طیف‌سنجی (FTIR) استفاده گردید. مطالعه ریخت‌شناسی نانو چندسازه‌ها با استفاده از آزمون اشعه ایکس (XRD) و میکروسکوپ الکترونی پویشی (SEM) انجام گردید. نتایج نشان داد که با افزودن مقدار نانو رس تا 4 درصد، خواص فیزیکی و مکانیکی بهبود یافت، اما مقاومت به ضربه کاهش یافت. همچنین با افزودن ماده سازگار کننده خصوصیات مکانیکی و فیزیکی بهبود یافت. نتایج طیف‌سنجی مادون‌قرمز نشان داد که با افزودن سازگار کننده مقدار گروه‌های هیدروکسیل در اثر پیوند با مالئیک‌انیدرید و تشکیل گروه‌های استری کاهش یافت. همچنین بررسی ریخت‌شناسی نانو چندسازه به کمک روش پراش اشعه ایکس نشان داد که توزیع ذرات نانو رس درزمینه پلیمری از نوع بین لایه‌ای بوده و با افزایش مقدار نانو رس، فاصله بین لایه‌ها افزایش می‌یابد. نتایج حاصل از میکروسکوپ الکترونی پویشی نیز حاکی از بهبود در فصل مشترک بین الیاف و ماتریس پلیمری با افزودن سازگار کننده بود.}, keywords_fa = {انیدریدمالئیک پلی‌پروپیلنی,چوب تاغ,خواص مکانیکی و فیزیکی,نانو ذرات رس,چندسازه چوب پلاستیک}, url = {https://www.ijwp.ir/article_19229.html}, eprint = {https://www.ijwp.ir/article_19229_f9ef9a5f8a967dfd9e56969a30d3f18d.pdf} }