@article { author = {Tajeddin, Behjat and Ansari, Hadi}, title = {Thermal and colorimetry properties of bleached wheat straw/LDPE biocomposites}, journal = {Iranian Journal of Wood and Paper Industries}, volume = {7}, number = {2}, pages = {283-295}, year = {2016}, publisher = {Iranian Scientific Association of Wood and Paper Industries}, issn = {2008-9066}, eissn = {2423-3242}, doi = {}, abstract = {This research was done to study the thermal and colorimetric properties of bleached wheat straw/polyethylene biocomposites. Thus, wheat straw was firstly bleached using different natural and/or chemical bleaching methods. The bleached wheat straw and the pure polyethylene were then mixed in ratio of 40 to 60 by twin screw extrouder at 145OC. Maleic anhydride polyethylene was also applied in %10 of polyethylene weight. Thermal and colorimetric properties of treatments were evaluated and compared to control sample (pure polyethylene). The results showed that the unbleached wheat straw composite had the lowest lightness value. Biocomposites containing bleached wheat straw pulp with xylanase and hydrogen peroxide 1% had the most lightness value after pure polyethylene. The results of the thermal behavior of the composites from DSC curves showed that the melting temperature of bleached wheat straw pulp with xylanase and hydrogen peroxide1% composite was higher than pure polyethylene and the others. The maximum and the minimum decomposition temperature of the composites belonged to the unbleached wheat straw (424.76°C) and the bleached wheat straw pulp (354.23°C), respectively.}, keywords = {Biocomposite,Bleaching,Colorimetric properties,Thermal properties}, title_fa = {خواص حرارتی و رنگ‌سنجی چندسازه کاه‌گندم رنگبری شده/پلی‌اتیلن سبک}, abstract_fa = {این پژوهش، با هدف تعیین خواص حرارتی و رنگ‌سنجی چندسازه کاه‌گندم رنگبری شده/ پلی‌اتیلن انجام شد. برای این منظور، ابتدا کاه گندم با استفاده از روش‌های مختلف رنگبری طبیعی و شیمیایی رنگبری شد. سپس، کاه گندم رنگبری شده و پلی‌اتیلن با -نسبت وزنی40 به60 با یکدیگر در یک اکسترودر دو مارپیچه ناهمسوگرد در دمای 145 درجه سانتی‌گراد مخلوط شدند. سازگارکننده مالئیک‌دار نیز به میزان 10% (وزنی از پلی‌اتیلن) در تهیه چندسازه به کار گرفته شد. آزمون‌های رنگ‌سنجی و گرمایی روی نمونه‌های ساخته شده انجام و نتایج آن با نمونه تهیه شده از پلیمر خالص مقایسه شد. نتایج نشان داد که کمترین میزان روشنایی در نمونه‌هایی مشاهده شد که فرایند رنگبری بر کاه گندم آنها انجام نشده است. چندسازه حاصل از خمیر رنگبری شده با آنزیم زایلاناز و پراکسیدهیدروژن 1%، بیشترین مقدار روشنایی بعد از پلی‌اتیلن خالص دارد. خواص گرمایی نمونه‌ها با استفاده از آزمون گرماسنجی روبشی تفاضلی نشان داد که چندسازه رنگبری شده با آنزیم و پراکسیدهیدروژن1%، در مقایسه با سایر تیمارها از دمای ذوب بالاتری برخوردار است. بالاترین دمای تجزیه در چندسازه بدون رنگبری برابر 76/424 درجه سانتی‌گراد و کمترین آن مربوط به چندسازه رنگبری شده برابر 23/354 درجه سانتی‌گراد می‌باشد.}, keywords_fa = {چندسازه,رنگبری,تغییر رنگ,خواص گرمایی}, url = {https://www.ijwp.ir/article_19225.html}, eprint = {https://www.ijwp.ir/article_19225_c1478dae87907e9125e6c65008f06a86.pdf} }