@article { author = {barzali, samira and jamalirad, laya and faraji, farshid and hajazi, sahab}, title = {Using cellulose nanofiber as filler of urea formaldehyde resin in plywood manufacture}, journal = {Iranian Journal of Wood and Paper Industries}, volume = {6}, number = {2}, pages = {227-237}, year = {2015}, publisher = {Iranian Scientific Association of Wood and Paper Industries}, issn = {2008-9066}, eissn = {2423-3242}, doi = {}, abstract = {Abstract In this study, physical and mechanical properties of poplar (Populus nigra) plywood made by urea-formaldehyde resin along with nano fiber cellulose were studied. For this reason, the nanofiber cellulose as filler at five levels 0, 1, 3, 5 and 7% based on oven dry weight of resin were used. Physical and mechanical properties of the samples, including water absorption and thickness swelling after 2 and 24 hours immersion in water, bending strength and modulus of elasticity (parallel and perpendicular to surface grain) and bonding shear strength were measured. The results showed that increasing the amount of nano fiber cellulose improved the dimentional stability of the boards. Also increasing the amount of nano fiber cellulose increases the bending strength and modulus of elasticity parallel to surface grain. On the other hand, increasing the amount of nano fiber cellulose increases the bonding shear strength but no significant differences observed between the different treatments.}, keywords = {Plywood,Nano-fiber cellulose,Filler,physical properties,Mechanical properties}, title_fa = {استفاده از نانوفیبر سلولزی به عنوان پرکننده چسب اوره فرمالدهید در ساخت تخته لایه}, abstract_fa = {در این تحقیق، خواص فیزیکی و مکانیکی تخته لایه ساخته‌ شده از چوب صنوبر تبریزی با چسب اوره فرمالدهید همراه با نانو فیبر سلولزی مورد بررسی قرار گرفت. برای این منظور از نانو فیبر سلولزی به عنوان ماده پرکننده در پنج سطح 0، 1، 3، 5 و 7 درصد وزن خشک رزین استفاده شد. خواص فیزیکی و مکانیکی نمونه‌های آزمونی شامل جذب آب و واکشیدگی ضخامت بعد از 2 و 24 ساعت غوطه‌وری در آب، مقاومت خمشی و مدول الاستیسیته موازی و عمود بر الیاف لایه سطحی و مقاومت برشی در سطح اتصال اندازه‌گیری شد. نتایج حاصل از این بررسی نشان می دهد که افزایش میزان نانو فیبر سلولزی موجب افزایش پایداری ابعادی تخته ها شده است. همچنین مقاومت خمشی و مدول الاستیسیته موازی با الیاف لایه سطحی، همراه با افزایش مصرف نانوسلولز، افزایش داشته است. از سوی دیگر افرایش میزان مصرف نانو سلولز موجب افزایش مقاومت برشی نمونه ها شده است اما اختلاف معنی‌داری بین سطوح مختلف تیمار ها مشاهده نشد.}, keywords_fa = {تخته لایه,نانوفیبر سلولزی,پر کننده,خواص فیزیکی,خواص مکانیکی}, url = {https://www.ijwp.ir/article_17021.html}, eprint = {https://www.ijwp.ir/article_17021_8944e4dc0443af6688fc8865adb04179.pdf} }