@article { author = {jahanshahi, shayesteh and Abdulkhani, Ali and Doosthoseini, Kazem and Shakeri, Alireza}, title = {Study of physical and mechanical properties of produced strawboard using bio epoxy tannins resin}, journal = {Iranian Journal of Wood and Paper Industries}, volume = {7}, number = {2}, pages = {271-282}, year = {2016}, publisher = {Iranian Scientific Association of Wood and Paper Industries}, issn = {2008-9066}, eissn = {2423-3242}, doi = {}, abstract = {Bio-epoxy tannin resin was made from tannin reaction with epichlorohydrin in an alkaline environment, Fourier transform infrared spectroscopy of epoxy groups of glycidyl reaction of the tannins confirmed, and the epoxy number was 7.2 epoxy resin final. Straw boards with Bio-epoxy tannin resin, using two variable temperature (180 and 200 °C) and variable times (7.5 and 10 minutes) were made. Physical and mechanical resistances such as water absorption and thickness swelling (after 2 and 24 hours soaking appears in water), internal bond, modulus and flexural modulus measured and the boards were compared with the standard EN312-4. The results showed that straw boards made with 200 °C and 10 minutes of press time, had the highest level of physical and mechanical properties. All boards produced in this research work, mechanical properties for public use, in accordance with the standards of Europe to have. That has functional properties comparable to petroleum-based synthetic adhesives are made of particleboard.}, keywords = {Strawboard,Epoxy tannin resin,internal bonding,Wheat straw}, title_fa = {بررسی خواص فیزیکی و مکانیکی تخته کاه ساخته شده با رزین بیو اپوکسی تانن}, abstract_fa = {رزین بیو اپوکسی تانن از واکنش تانن با اپی‌کلروهیدرین در محیط قلیایی ساخته شد. طیف‌سنجی زیر قرمز تبدیل فوریه حضور گروه-های اپوکسی در اثر واکنش گلیسیدیل‌دار شدن تانن را تایید کرد و عدد اپوکسی رزین نهایی 2/7 بدست آمد. تخته‌‌کاه با استفاده از رزین بیو اپوکسی تانن با دو دمای متغیر (180 و 200 درجه سانتی‌گراد) و دو زمان متغیر (5/7 و 10 دقیقه) ساخته شد مقاومت‌های فیزیکی و مکانیکی از جمله جذب آب و واکشیدگی ضخامت (بعد از 2 و 24 ساعت غوطه‌وری در آب)، چسبندگی داخلی، مدول الاستیسیته و مدول خمشی تخته‌های حاصل اندازه‌گیری و با استاندارد EN312-4 مقایسه شدند. نتایچ نشان داد که تخته‌کاه ساخته شده با دمای 200 درجه و زمان 10 دقیقه پرس، بالاترین مقدار ویژگی‌های فیزیکی و مکانیکی را داشتند. همه تخته‌کاه‌های تولیدی در این تحقیق، خواص مکانیکی برای استفاده‌های عمومی، مطابق با استانداردهای اروپا را دارا می‌باشند که دارای خواص کاربردی قابل قیاس با تخته خرده‌چوب ساخته شده با چسب‌های سنتزی پایه نفتی می‌باشند.}, keywords_fa = {تخته کاه,رزین اپوکسی تانن,چسبندگی داخلی,کاه گندم}, url = {https://www.ijwp.ir/article_16811.html}, eprint = {https://www.ijwp.ir/article_16811_0f0e9fa4864845e5953e790da02edaac.pdf} }