@article { author = {Roohani, Mehdi and kord, behzad}, title = {Dynamic Mechanical and Thermal Properties of Bagasse/Glass Fiber/Polypropylene Hybrid Composites}, journal = {Iranian Journal of Wood and Paper Industries}, volume = {7}, number = {1}, pages = {103-114}, year = {2016}, publisher = {Iranian Scientific Association of Wood and Paper Industries}, issn = {2008-9066}, eissn = {2423-3242}, doi = {}, abstract = {This work aims to evaluate the thermal and dynamic mechanical properties of bagasse/glass fiber/polypropylene hybrid composites. Composites were prepared by the melt compounding method and their properties were characterized by differential scanning calorimetry (DSC) and dynamic mechanical analysis (DMA). DSC results found that with incorporation of bagasse and glass fiber the melting temperature (Tm) and the crystallisation temperature (Tc) shift to higher temperatures and the degree of crystallinity (Xc) increase. These findings suggest that the fibers played the role of a nucleating agent in composites. Dynamic mechanical analysis indicated that by the incorporation of bagasse and glass fiber into polypropylene, the storage modulus ( ) and the loss modulus ( ) increase whereas the mechanical loss factor (tanδ) decrease. To assess the effect of reinforcement with increasing temperature, the effectiveness coefficient C was calculated at different temperature ranges and revealed that, at the elevated temperatures, improvement of mechanical properties due to the presence of fibers was more noticeable. The fiber-matrix adhesion efficiency determined by calculating of adhesion factor A in terms of the relative damping of the composite (tan δc) and the polymer (tan δp)and volume fraction of the fibers (Фf). Calculated adhesion factor A values indicated that by adding glass fiber to bagasse/polypropylene system, the fiber-matrix adhesion improve. Hybrid composite containing 25% bagasse and 15% glass fiber showed better fiber-matrix adhesion.}, keywords = {Adhesion factor,Dynamic mechanical analysis,Effectiveness coefficient,Glass fiber,Hybrid composite}, title_fa = {خواص مکانیکی دینامیکی و گرمایی کامپوزیت های هیبریدی باگاس/الیاف شیشه/پلی پروپیلن}, abstract_fa = {این پژوهش به منظور ارزیابی خواص گرمایی و مکانیکی دینامیکی کامپوزیت های هیبریدی باگاس/الیاف شیشه/پلی پروپیلن انجام شد. کامپوزیت های هیبریدی با روش اختلاط مذاب ساخته شدند و خواص آنها با آزمون گرماسنجی روبشی تفاضلی(DSC) و آزمون مکانیکی دینامیکی(DMA) مورد بررسی فرار گرفت. نتایج حاصل از آزمون گرماسنجی روبشی تفاضلی مشخص کرد که با افزودن باگاس و الیاف شیشه، دمای ذوب و دمای بلورینگی به دماهای بالاتر انتقال یافت و درجه بلورینگی افزایش پیدا کرد. این یافته ها آشکار ساخت که باگاس و الیاف شیشه نقش عامل هسته زا را در کامپوزیت ایفا می کنند. آزمون مکانیکی دینامیکی نشان داد که با وارد کردن باگاس و الیاف شیشه به ماتریس پلی پروپیلنی، مدول ذخیره ( ) و مدول اتلاف ( ) افزایش یافته، درحالی که از فاکتور اتلاف (tanδ) کاسته شد. به منظور ارزیابی اثر تقویت کنندگی با افزایش دما، ضریب اثربخشی (C) در دامنه های دمایی مختلف محاسبه و مشخص شد که در دماهای بالا بهبود خواص مکانیکی در اثر حضور الیاف، ملموس تر است. کیفیت چسبندگی الیاف- ماتریس با محاسبه فاکتور چسبندگی (A) بر حسب فاکتور اتلاف کامپوزیت (tan δc)، فاکتور اتلاف پلیمر (tan δp) و جزء حجمی الیاف (fФ) تعیین شد. مقادیر محاسبه شده فاکتور چسبندگی (A) نشان داد که با افزودن الیاف شیشه به سیستم باگاس/پلی روپیلن، چسبندگی الیاف- ماتریس بهبود می یابد. کامپوزیت هیبریدی متشکل از 25 درصد باگاس و 15 درصد الیاف شیشه، چسبندگی الیاف- ماتریس بهتری را بروز داد.}, keywords_fa = {آنالیز مکانیکی- ‌دینامیکی,الیاف شیشه,ضریب اثربخشی,فاکتور چسبندگی,کامپوزیت هیبریدی}, url = {https://www.ijwp.ir/article_14273.html}, eprint = {https://www.ijwp.ir/article_14273_32281dc8915e4cdd5663be44803cfbf1.pdf} }