@article { author = {Kord, Behzad and zare, hosein and Hosseinzadeh, abdollah}, title = {Investigation on the effect of mixed rapeseed stalk residues with wood particles, and mixing of melamine and urea formaldehyde resin on properties of manufactured particleboard}, journal = {Iranian Journal of Wood and Paper Industries}, volume = {7}, number = {2}, pages = {167-178}, year = {2016}, publisher = {Iranian Scientific Association of Wood and Paper Industries}, issn = {2008-9066}, eissn = {2423-3242}, doi = {}, abstract = {In this study, the possibility of using the rapeseed stalk mixed with industrial wood particles for manufacturing particleboard with target density of 0.7 gr/cm3 was considered. Variable factors such as mixing ratios of rapeseed stalk with industrial wood particles at five mixing levels of (0-100, 25-75, 50-50, 75-25 and 100-0 percent), mixing ratios of melamine resin with urea formaldehyde at three levels of 0-100, 15-85 and 30-70 percent, and kind of board at two levels of homogenate and layer were considered. 10 percent resin based on oven dried weight of particles, 2 percent catalyzer based on oven dried weight of resin, press temperature and time with 170 OC and 7 minute, press pressure and rate with 30 Kg/cm3 and 4.5 mm/min were fixed. Then, the boards were manufactured and the physical and mechanical properties including modulus of rupture, modulus of elasticity, internal bonding, water absorption and thickness swelling were measured according to EN standard. Results indicated that the modulus of rupture, modulus of elasticity, water absorption and thickness swelling of boards increased with increase rapeseed stalk loading; however, the internal bonding decreased. Also, the use of melamine urea formaldehyde resin caused to improve the mechanical strength and dimensional stability in the samples.}, keywords = {Particleboard,Rapeseed stalk,melamine formaldehyde,Dimensional stability,Mechanical properties}, title_fa = {بررسی اثر آمیختن پسماند ساقه کلزا به خرده های چوب و آمیختگی چسب ملامین و اوره فرم آلدهید بر ویژگی های تخته خرده ساخته شده}, abstract_fa = {این تحقیق با هدف بررسی امکان استفاده از ساقه کلزا به صورت مخلوط با خرده چوب صنعتی در تولید تخته خرده چوب با دانسیته 7/0 گرم بر سانتی متر مکعب انجام شد. درصد اختلاط ساقه کلزا با خرده چوب صنعتی در پنج سطح 100- 0، 75- 25، 50- 50، 25- 75 و 0- 100، درصد اختلاط چسب ملامین با اوره فرمالدهید در سه سطح 100- 0، 85- 15 و 70- 30، و تخته ساخته شده به دو صورت همگن و لایه ای به عنوان عوامل متغیر درنظر گرفته شدند. چسب مصرفی به میزان10 درصد بر مبنای وزن خشک خرده چوب، کاتالیزور به میزان 2 درصد بر مبنای وزن خشک چسب، دما و زمان پرس به ترتیب 170 درجه سانتی گراد و 7 دقیقه، فشار پرس 30 کیلوگرم بر سانتی متر مربع و سرعت پرس 5/4 میلی متر بر دقیقه عوامل ثابت تحقیق بودند. بدین ترتیب تخته های آزمونی ساخته شده و خواص فیزیکی و مکانیکی تخته ها شامل مقاومت خمشی، مدول الاستیسیته، چسبندگی داخلی، جذب آب و واکشیدگی ضخامت بر طبق استاندارد EN اندازه گیری شد. نتایج نشان داد که با افزایش میزان ساقه کلزا در تخته ها، مقاومت خمشی، مدول الاستیسیته، جذب آب و واکشیدگی ضخامت افزایش یافته، در حالی که چسبندگی داخلی نمونه ها کاهش پیدا کرده است. همچنین استفاده از چسب ملامین اوره فرمالدهید در ساخت تخته خرده چوب سبب بهبود مقاومت مکانیکی و پایداری ابعاد نمونه ها شد.}, keywords_fa = {تخته خرده چوب,ساقه کلزا,ملامین فرمالدهید,پایداری ابعاد,خواص مکانیکی}, url = {https://www.ijwp.ir/article_12941.html}, eprint = {https://www.ijwp.ir/article_12941_2bcc8dc93d7a3d8e292a67dc35479762.pdf} }