@article { author = {Najafi, Abdollah and bay, mohammad ali}, title = {Study on Physical and Mechanical Properties of Wood flour / ABS Composites}, journal = {Iranian Journal of Wood and Paper Industries}, volume = {6}, number = {1}, pages = {79-93}, year = {2015}, publisher = {Iranian Scientific Association of Wood and Paper Industries}, issn = {2008-9066}, eissn = {2423-3242}, doi = {}, abstract = {The aim of this research is study on physical and mechanical properties of wood flour/ Acrylonitrile Butadiene Styrene (ABS) based on effect of SMA as coupling agent (0, 4 phc) and wood flour filler loading (30,40, 50% of total weight) and virgin and recycled ABS. Samples of composites were made by injection molding method and physical tests including long term water absorption and thickness swelling and mechanical tests containing hardness and tensile strength and modulus of them were performed according to ASTM standards method. The results showed that by increasing the amount of wood flour water absorption, water absorption coefficient, thickness swelling, hygroscopic thickness swelling rate, hardness, tensile strength and modulus of composites were increased. Using of virgin ABS in making of composites increased the tensile properties, hardness composites and decreased water absorption, thickness swelling and parameters of them, in long term immersion. Using of SMA in composites decreased hardness of composites.}, keywords = {Acrylonitrile Butadiene Styrene,Wood Plastic Composites,water absorption coefficient,hygroscopic thickness swelling rate,tensile properties}, title_fa = {بررسی خواص فیزیکی و مکانیکی چندسازه چوب پلاستیک آرد چوب/اکریلونیتریل بوتادی‌ان استایرن}, abstract_fa = {هدف از این پژوهش، بررسی خواص فیزیکی و مکانیکی چند سازه آرد چوب/ اکریلونیتریل بوتادی ان استایرن تحت تاثیر سازگار کننده استایرن مالئیک انیدرید SMA (در دو سطح 0 و 4 phc) و ماده پرکننده آرد چوب ( در سه سطح 50،40،30 درصد وزن کل ) و نوع دست اول و بازیافتی پلیمر اکریلونیتریل بوتادی ان استایرن (ABS) می باشد. نمونه های مورد آزمایش توسط روش قالبگیری تزریقی ساخته شده و آزمون فیزیکی جذب آب و واکشیدگی ضخامت طولانی مدت برای اندازه گیری ضریب انتشار رطوبت و نرخ واکشیدگی ضخامت و آزمون های مکانیکی شامل مقاومت و مدول کششی و سختی بر روی نمونه ها مطابق استاندارد ASTM انجام گرفت. نتایج نشان داد که با افزایش مقدار آرد چوب، بر مقادیر جذب آب، واکشیدگی ضخامت، ضریب انتشار رطوبت و نرخ واکشیدگی ضخامت و مقاومت و مدول کششی و نیز سختی چندسازه‌ها افزوده می شود. استفاده از ABS دست اول در ساخت چندسازه‌ها موجب افزایش خواص کششی و سختی و کاهش جذب آب، واکشیدگی ضخامت و پارامترهای آن می شود. استفاده از سازگارکننده SMA سختی چند سازه را کاهش داد.}, keywords_fa = {اکریلونیتریل بوتادین استایرن,چند سازه چوب پلاستیک,ضریب انتشار رطوبت,نرخ واکشیدگی ضخامت,خواص کششی}, url = {https://www.ijwp.ir/article_12529.html}, eprint = {https://www.ijwp.ir/article_12529_0f22f4716d02a65d36374e4798259f8e.pdf} }