@article { author = {Pirayeshfar, Amir hossein and Jalili, M.Mahdi and Musavi, Yahya}, title = {A Study on Tensile Behavior and Water Uptake of Wood Powder-Composites Based on Epoxy and Unsaturated Polyester Resins}, journal = {Iranian Journal of Wood and Paper Industries}, volume = {3}, number = {2}, pages = {141-156}, year = {2013}, publisher = {Iranian Scientific Association of Wood and Paper Industries}, issn = {2008-9066}, eissn = {2423-3242}, doi = {}, abstract = {In this study, two kinds of epoxy resins (i.e. high-viscosity and low-viscosity) as well as one polyester resin (orthophthalic grade) were selected and examined as pure resins and also as a polymeric matrix for producing wood-composites. In this study, tensile properties, water uptake, and degradation of samples in water were also investigated. The results show that addition of wood particles to the thermoset resins strongly impresses on their tensile behavior and water uptake. Tensile studies show that addition of wood powder improves the tensile properties of polyester resin as compared with viscosity epoxy one, although its modulus value is relatively less than that of low viscosity epoxy resin. Water uptake measurements also revealed that pure polyester resin and its related composites possess minimum water uptake and less degradation in water as compared with corresponding epoxy specimens and from which the lowest extent of materials is extracted and migrated to the water even after 50 days immersion in water.  }, keywords = {Epoxy resin,Unsaturated polyester resin,Wood powder-composite,Tensile,Water uptake,Extracted materials}, title_fa = {بررسی و ارزیابی رفتار کششی و جذب آب چند سازه‌های چوب/ اپوکسی و چوب/ پلی‌استر}, abstract_fa = {در این پژوهش، دو نوع رزین اپوکسی با غلظت (ویسکوزیته) بالا و پایین و یک نوع رزین پلی‌استر غیر اشباع گزینش شد و برای تولید نمونه‌های رزین خالص و همچنین چندسازه مورد استفاده قرار گرفتند. در این بررسی ویژگی های کششی، جذب آب و میزان شدت تخریب نمونه‌ها در آب مورد بررسی قرار گرفت. نتایج به دست آمده نشان داد که اضافه کردن پودر چوب به رزین‌های یاد شده تاثیر قابل ملاحظه‌ای بر ویژگی های کششی و جذب آب آنها دارد. آزمون کشش نشان داد که اگرچه مدول رزین پلی‌استر خالص تا حدودی پایین‌تر از رزین اپوکسی با غلظت کم بود، ولی به هر حال پس از اضافه شدن پودر چوب، ویژگی های کششی چندسازه پلی استر در مقایسه با چندسازه اپوکسی با غلظت کم بهینه تر گزارش شد. بررسی میزان جذب آب نشان داد که رزین پلی‌استر خالص و چندسازه ساخته شده از آن کمترین میزان جذب آب را در مقایسه با نمونه‌های همانند رزین اپوکسی دارند، به علاوه میزان تخریب نمونه پلی‌استر خالص و چندسازه‌های ساخته شده از آن در مقایسه با نمونه‌های همانند از رزین اپوکسی پایین‌تر بود، به طوری که پس از گذشت 50 روز غوطه‌وری در آب، کمترین میزان مواد استخراجی از چندسازه‌های پلی‌استری به درون آب وارد شده بود.}, keywords_fa = {رزین اپوکسی,رزین پلی‌استر غیر اشباع,چندسازه,ویژگی های کشش,جذب آب}, url = {https://www.ijwp.ir/article_11491.html}, eprint = {https://www.ijwp.ir/article_11491_22e7e19ad264893cad19cfade3500768.pdf} }