@article { author = {Kargarfard, Abolfazl}, title = {The Infuence of Coupling Agent and the Content of Fibers on Tensile Strength and Physical Properties of Cotton Fiber Stem/Recycled Polypropylene Composites}, journal = {Iranian Journal of Wood and Paper Industries}, volume = {3}, number = {2}, pages = {131-140}, year = {2013}, publisher = {Iranian Scientific Association of Wood and Paper Industries}, issn = {2008-9066}, eissn = {2423-3242}, doi = {}, abstract = {The objective of this study was to investigate the influence of coupling agent and the content of fiber on tensile strength and physical properties of wood/plastic composite produced from recycled polypropylene using mat forming procedure. Recycled polypropylene and three levels of Cotton Fiber Stem (50, 55 and 60%) and three levels of MAPP (0, 3 and 5%) were used. The results of tensile strength and physical properties were statistically analyzed using factorial experimental design. The results indicated that the tensile strength of composites with increasing MAPP content and decreasing of fiber content was improved However the modulus of tensile reduced significantly when the fibers content reduced. Also, the physical properties of composites were improved with increasing of MAPP consumption. Thickness swelling of composites after 24 hours and water absorption after 2 hours in boiling water showed these properties are lower when 50% fibers is used. }, keywords = {wood plastic composite,Recycled polypropylene,coupling agent,Cotton fiber stem,Tensile strength and physical properties}, title_fa = {بررسی و ارزیابی تاثیر میزان سازگارکننده و الیاف بر ویژگی های کششی و فیزیکی چند سازه لیاف ساقه پنبه- پلی پروپیلن بازیافت شده}, abstract_fa = {هدف این بررسی، استفاده از الیاف ساقه پنبه و پلی پروپیلن بازیافتی در تولید چند سازه های چوب/ پلاستیک به روش ریزش کیک بوده است. لذا از الیاف ساقه پنبه در 3 سطح 50، 55 و 60 درصد (بر پایه وزن خشک چند سازه) و همچنین استفاده از 3 سطح ماده جفت کننده MAPP[1] ( صفر، 3 و 5 درصد) با استفاده از پروپیلن بازیافتی چند سازه های چوب- پلاستیک ساخته شد. نتایج اندازه گیری ویژگیهای کششی و فیزیکی چند سازه ها با استفاده از طرح آزمایش فاکتوریل در قالب طرح کامل تصادفی تجزیه و تحلیل شدند. نتایج نشان داد که مقاومت کششی چند سازه های ساخته شده با افزایش میزان سازگارکننده و کاهش مصرف الیاف بهبود یافته است. در حالی که مدول کشسانی کششی با کاهش میزان الیاف به طور معنی داری کاهش یافت. همچنین همه ویژگیهای فیزیکی چندسازه ها با افزایش مصرف سازگارکننده بهبود یافتند. همچنین با کاهش میزان الیاف، واکشیدگی ضخامت 24 ساعت و جذب آب 2 ساعت در آب جوش به کمترین میزان کاهش یافتند.   1}, keywords_fa = {چند سازه چوب/پلاستیک,پلی پروپیلن بازیافتی,الیاف ساقه پنبه,ویژگیهای کششی,ویژگیهای فیزیکی}, url = {https://www.ijwp.ir/article_11490.html}, eprint = {https://www.ijwp.ir/article_11490_f7218768ae02c0d0f3c699d34c4f487d.pdf} }